What are the dependencies to get a resource name listed in the onwer field in project online in sharepoint permission mode?
Hi All,
We have added resource in Project Managers group and onwers group , but still the resource name is not populating in Owners field when we are creating the project.
Please help...
Thanks, Rose
Hi Rose,
It might be that the user's permissions have been changed directly in his user's settings. Try to see if the user has the correct permissions such as log on, save project, connect with MS Project Pro...
By the way, the "owner" group is not a default security group. If you didn't customize the default PM group, try only to add this PM group to the user, not the "owner" group.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |
Similar Messages
-
My iPhone was stolen. I used Find My iPhone app to lock it and display a message. The phone has not connected to the internet to locate it. I contacted the police and they have taken my meid number. How does this work and what are my chances of getting the phone back? Are there other ways the theif can use it. I was told once they put in a new sim card and use it, whatever software the police have, it will show up.
Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes. If they do that, they'll probably keep him under surveilance for a year or so before they act.
Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
I'm sorry, but that's the way it is. -
I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.
Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update. -
When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.
Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
I am using a mac - OSX 10.7.5
I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
The contents I am placing are all Vector - Illustrator files
But, I wonder about some of the vector files I work with. Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight.
Your help is very much appreciated. Thank you! -
I have my Yahoo Mail "poped" over to Apple Mail. I can recieve emails but I can't send them out. The blue bar at the bottom left of the Mail page gets half way across and then the pop-up "Cannot send message using the server" comes up? What do I do?
Your outgoing mail server is different than your incoming server. Usually the outgoing mail server will have smtp in it. I noticed yours said "cannot send message using the server mail.wavecable.com". That sounds like an incoming mail server. Try setting your outgoing mail server to smtp.wavecable.com
I hope that helps. -
Hello
I am coming to the united stats next month and i have a broken iphone 4
What are my options ?
And could i replace it with the new iphone 5 or other apple products ?
And how much will it cost me .
Thank you for you're time.
<Edited by Host>If that iPhone was orignally sold in the US, Out of Warranty replacement cost
will be
Phone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149
Replacement will be an iPhone of the same color and GB. There is no option to upgrade
using Out of Warranty replacement. -
Error Message, during installation of Lion; “This disk is not formatted as Mac OS Extended (journaled). Use Disk Utility to enable journaling or reformat the disk.” The disk I selected to install OS X on, was the only one listed, “Macintosh HD”. The results of a Disk Utility check are; Format: Mac OS Extended (journaled), Name: Macintosh HD. There is a fresh Time Machine backup. The computer was Restarted and installation attempted again - same result. I have downloaded Lion a second time, and tired install again, same results. The computer is a December 2007, iMac 24” with 2.4 GHz Intel Core 2 Duo, 4 GB Memory, s/w version 10.7.5; Disk Capacity 319 GB, Available 117 GB. Macintosh HD has alway been the system disk, does it now have an identity crisis? Would reformatting the disk mean Erasing it? Exactly what do I do in Disk Utility to “reformat” the disk, I don’t see that listed on the menus. This computer is getting cranky, I no longer Shut Down at night, only Sleep. If it’s Shut Down, the next morning I am treated to a white screen, for a long time, before it finally shows me the Log On Screen. Suggestions would be appreciated.
RRFS - This took me a long time to finally get to a fix. Your reply led me to investigate the Repair Disk Partition - as it turned out there wasn't one; the HardDrive was going bad slowly. The 10 to 40 minutes it took to startup in the morning, was the HD trying to find it's way. I had the 320GB HD replaced with a 2TB HD. All is OK now. Thank You very much!! Also, the Apple store geeks couldn't make it better but the locally owned Apple retailer did just great with it. from San Luis Obispo County - Peace.
-
I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.
Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible. -
I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\. I went to the Task Manager and it is not listed in the Processes tab. What do I do now?
Are you looking for iPodService.exe?
Might be better to run services.msc from the run dialog and shut down the service polietly.
tt2 -
Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
IngoNeverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended. -
I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade
iCloud requires OS X 10.7.2.
-
My first laptop died. I have a new laptop now. How can I get my Ipod song list on the new laptop without downloading each c.d.?
See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?
paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.
-
"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help
I am having the same problem, and my computer is authorized through my Adobe ID and I cannot open any books. I tried downloading a book from the university library, using my ID, the book is in ACSM format, and I cannot open the book because it keeps telling me
"error check activation" I am including screen shots to show my computer is authorized.
Maybe you are looking for
-
How to get JDev 10.1.2/ADF working with MS SQL Server Identity Column
Hello JDevTeam & JDevelopers, I want to use JDev/ADF with a MS SQL Server 2005 database that contains tables employing IDENTITY Columns. Using JDev/ADF and DBSequence with an Oracle database employing before triggers/sequences accomplishes what I am
-
SAPInst ECC6.0 - Error during phase "Create Java Users"
Hello, I am currently installing ECC6.0 IDES with windows server 2003 & MaxDB. I am getting an error during the "Create Java Users" phase. The initial error stated that the user SAPJSF already existed. During retry a different error came up - that th
-
Exception Handling in Java .. Help
Hi folks I needed some help in exception handling ... I know that I could go like this public class MyClass public static void main(String args[]) try System.out.println(1/0); catch(java.lang.Exception e)
-
Bad Connection to carradio via aux-in
Wehen I connect my New iPod nano to my Car Radio by aux-in there is a Constantin Stativ. This didn't occur with my Old iPod nano 3rd Gen. Can I change anything on my ipod's Präferenzen?
-
DESS_ES_HOME: null When Running ODI agent scheduler
Hi Experts , I have scheduled a 2 scenario's in ODI 10g with 15 Mins interval and started the agentscheduler.bat, Once after the first scenario is executed, I am getting the below error on the agent and the next scenario is not getting executed. Coul