What are the difference between version 1.0016 and 1.1.13

i have a Wrvs4400n gigbit wireless router. the firmware version is 1.0016. i try to upgrade to 1.1.13 but its not accepting the up grade.
Also ip signature version is 1.25.

The first thing I would check is the hardware version of your router.  There are 3 hardware versions for this router:  v1,  v1.1,  v2.  (The hardware version can be found on the label on bottom of the router.)
For version 2, there are no firmware updates available, as it already has the newest firmware version loaded.
For versions 1, and 1.1, their are two firmware updates listed on the website. (v1.1.03, and v1.1.13)  If you have v1 or v1.1 of the hardware, and are having problems upgrading, I would suggest trying to upgrade to v1.1.03 first, then trying v1.1.13 after you have upgraded to the previous version.
Thank you,
Darren

Similar Messages

  • What is the difference between version 4.7EE and ECC 5.0

    DEAR EXPERTS
    what is the difference between version 4.7EE and ECC 5.0?WHAT ARE THE ADDITIONAL FUNCTIONALTIES IN
    ECC 5.0?

    hi,
    Diff between 4.7 and ECC 5.0:
    1. 4.7 is on R/3 platform, while ECC 5.0 is on mySAP ERP 2004
    2. ECC 5.0 is having ESA(enterprise Serviceoriented Architecture)
    3.ECC 5.0 is web enabled with Netweaver technology.
    mySAP ERP is the "newer" ERP with numbering conventions like ECC (which stands for ERP Central Component) 5 or 6
    mySAP (aka mySAP.com) Business Suite contains Solutions like CRM, SCM etc. The important thing to note here is that this contains mySAP ERP, the one above
    mySAP All-in-One Solution is designed for smaller companies (the ad that says SAP is not just for large companies but for great companies where the above mentioned functionality is scaled down and is made to run on one database on a PC type of setup as opposed to the full blown architectures on which SAP traditionally set to run

  • Basic data what is the difference between Version Dependent task and indep

    In basic data settings what is the difference between Version Dependent task and version independent task. please give detailed explanation

    Hope this link gives you the answer.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4b7aa453d11d189430000e829fbbd/frameset.htm
    Best regards,
    Sudhi

  • From ABAP view, what is the difference between version 4.7 and ECC 6.0 ?

    Hi,
    I am a ABAP developer. I want to know the difference between version 4.7 and ECC 6.0 from a programmer
    perspective.
    I also want to know  what is obsoleted and what is enhanced.
    Thanks.
    Best Regards,
    Chris Gu

    I'm not sure if any of this is in your 4.7 version, but I know it wasn't available in our 4.6C before we upgraded and we have found the following extremely helpful in ECC 6.0:
    1.  The new ABAP Debugger - Search SDN and you'll probably find a bunch of info on these enhancements
    2.  The Enhancement Framework - this is a great new framework allowing enhancements to standard SAP programs without having to use "core Mods".  Had we known about it prior to our upgrade, we could have probably eliminated 75% or so of our custom Z Programs which are copies of standard SAP code  and 100% of our core mods (of which we only have a handful)
    3. Code Inspector and more importantly the ability to turn it on to automatically run when releasing a transport.
    4. The ABAP workbench has changed a bit with a new editor including some minimal code completion.
    5.  Automatic generation of services from any remote enabled function module.
    These are just a few of the things that I've found helpful in an upgraded environment.

  • What are the differences between version 9 and X of the Reader?

    I have been running various releases of Version 9 of the Adobe Reader for a long time. I have noticed that when there is an update available for Version 9 and I click on the "more information" button on the update, it takes me to a web page where there is information on the latest levels of both Version 9 and Version X, but I cannot find any information on what the differences are between version 9 and X. I read the FAQ and found nothing on this, and I even searched this forum and was surprised that there were no topics on this question already.
    Can someone tell me the differences between the 2 versions. I am running Windows 7; is that important as to which version of Reader I should use?

    http://www.adobe.com/products/reader.html
    http://blogs.adobe.com/asset/2010/07/introducing-adobe-reader-protected-mode.html
    Both Adobe Reader 9 and Adobe Reader X work on Windows 7 .
    Hope this helps.

  • What are the differences between oracle adf 10g and adf 11g

    Could you please let me know what are the diff b/w oracle adf 10g and 11g, i tried in many user guides but i could not find it.
    Thanks in advance,
    Poli Reddy P

    893771 wrote:
    Hi all,
    I would like to know what the differences between Oracle and other NoSQL database are.
    When and why should we use Oracle?I suggest that you start here:
    http://www.oracle.com/technetwork/database/nosqldb/overview/index.html
    Is Oracle NoSQL database link with Big Data Appliance?Yes, Oracle NoSQL Database will be a component of the Big Data Appliance.
    Can we use map-reduce on a single personal computer? How should we install Oracle NoSQL database to use map reduce on a single personal computer?Yes, I believe you can run M/R on a single computer. Consult the various pieces of documentation available on the web. You may run Oracle NoSQL Database on the same computer that you are running M/R on, but it is likely that they will compete for CPU and IO resources and therefore performance may suffer.
    Do we also have eventual consistency with Oracle NoSQL database? Yes.
    Can we lose data if master node fails?If you run Oracle NoSQL Database with the default (recommended) durability settings, then if the master fails, a new one will be elected and data is not lost.
    Are transactions ACID with Oracle NoSQL database? How can we prove it?Yes, each operation is executed in an ACID transaction. The API has the concept of "multi" operations which allow the caller to perform multiple operations on sets of records with the same major key, but different minor keys. Those operations are also performed within a transaction.
    Charles Lamb

  • What are the difference between Model A1586 (GSM)* and Model A1524 (GSM)* as shown in the apple website?

    Hi,
    I would like to ask about some information on iPhone 6Plus
    Can i know whats the difference on these two models between Model A1586 (GSM)* and Model A1524 (GSM)* as shown in the Malaysia apple website?
    If its different, then the product which consumer wanted to select, will it be all the model same price in Malaysia?
    Thank you.
    Your sincerely,
    Nick

    "why should Apple manufacture the 2 models as different models?"
    Apple doesn't manufacture two models with the same model number.  The "1429" iPhone can utilze either the GSM or CDMA protocol, depending upon the carrier's system.  In the US, Apple offers an unlocked "1428" iPhone 5, for use on GSM networks.  I live in Bangkok, and Apple - and Premium Resellers - offer the "1429" iPhone, which can be used on either GSM or CDMA networks.

  • What are the differences between Adobe Reader 9 and Adobe Reader 11?

    We are planning on upgrading one of our servers to Adobe Reader 11 and are currently on 9. I would like to know what the differences are so that we can better prepare ourselves for this upgrade. Thanks.

    http://helpx.adobe.com/acrobat/release-note/release-notes-acrobat-reader.html

  • What are the differences between CTRL/Slider protocol and MIDI CC?

    Hello there,
    recently I've purchased a korg nanokontrol and I've entered the mysterious world of CTRL/Slider protocol
    As I am sure many of you know you can apply to the controller in question logic templates and usb drivers, or install the device directly in logic.. and boom the new CTRL/Slider option shows up in the control surfaces set up window.
    I've not really fully understood what it does.
    If you let your set up use it instead of your traditional midi ports, then the controller will control logic faders BUT will not send CC midi messages anymore, thus beacoming useless to control 3rd party virtual instruments.
    Conversely a korg editor let you fiddle with what appear to be CCs but still, if logic is set up with CTRL and Slider as input and output ports, no joy with virtual instruments.
    Am I misisng something or CTRL/Slider and 'traditional' Midi are mutually esclusive?
    all the best

    As soon as a control message is remapped to a *Controller Assignment,* that message is not sent to Logics' sequencer anymore. Which makes sense, because the controller would otherwise affect two parameters simultaneously, and that would make it almost useless, or you would need to configure extra (MIDI CC)filters.
    And since you can remap that controller message to any automatable parameter in any plugin +and to+ any mixer parameter and almost all key commands, there really is no need to want to use MIDI CC for any of that.
    ...unless you have a third party plugin that has no or few automatable parameters, and can only be controlled by MIDI CC ( RealGuitar being an example).
    How your controller specificly interacts (with its plugin and all) I don't know, but the principle that a MIDI control message remapped to track automation will no longer 'get to' Logics' sequencer applies anyway.

  • What are the differences between BBDT 4.1 and 4.7 and will 4.1 sync with a Bold?

    I am currently syncing a 8830 using BlueTooth and BB Desktop 4.1.
    The reason I am using BBDT 4.1 is because with later versions  they ask if it is OK to allow the BB to connect each time.That confirmation dialog box is really annoying.
    I am considering getting a Bold or Storm and would like to know if they will sync with BBDT 4.1.
    Also what features and benifits am I giving up not using a new version of BBDT? I dont use or care about Media Manager or syncing music.
    Thank you

    Hi,
    go to this website
    http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
    enter your
    Source release , target release and the module to know more.
    Thanks
    Ashok

  • What are the differences between MacBook Pro 2008 and MacBook Pro 2012?

    AirPlay Mirror in OS X Mountain Lion, allows the user to connect a MacBook Pro to a TV using Apple TV, but only if the MacBook Pro is early 2011 or newer. My MacBook Pro is 2008, 2.5 GHz Core 2 Duo with 4GB 667 MHz DDR2 SDRAM. What am I missing that would allow me to use AirPlay Mirror, and is it possible for me to upgrade my MBP to early 2011 specs?

    About four years of hardware change. You csnnot upgrade your hardware. You can simply buy a new computer or find an alternative:
    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Another solution is the Air Parrot.

  • What are the differences between imovie on ipad and imovie on a MacBook Air?

    I am a YouTubeer and want to begin doing some better editing on my videos, because Windows Live Movie Maker is just not good enough I don't think. I would really like to use iMovie to edit my videos, but I am not sure if there is any major differences on iMovie on an iPad and iMovie on a Mac. Please help! I would prefer to get an ipad because it is much cheaper, but if the iMovie on an iPad is not as good, I will consider getting a Mac.

    I don't know the specifics of iMovie as I don't use it but, almost by definition, an application for a Mac is much more powerful and versatile than an app for an iPad.

  • What are the differences between ADOBE CYCLE 7 and 8?

    hello,
    I have got a file created in version 8 and asked to run it in version 7, i've found that many events doesn't run in the old version and thus stops the form from completion.
    Please help me out of this

    http://helpx.adobe.com/acrobat/release-note/release-notes-acrobat-reader.html

  • What are the differences between Adobe Pro X and Adobe Pro XI?

    I currently use XI and may be forced to use X. What features will I loose?

    http://helpx.adobe.com/acrobat/release-note/release-notes-acrobat-reader.html

  • What are the differences between LabVIEW, LabVIEW RT and LabVIEW FPGA

    I need a comparison of LabVIEW, LabVIEW RT and LabVIEW FPGA
    Solved!
    Go to Solution.

    NI LabVIEW is a platform and development environment for a visual programming language from National Instruments.
    NI LabVIEW Run-Time Engine includes the libraries and other files necessary to run applications and shared libraries built in LabVIEW.
    NI LabVIEW FPGA Module uses LabVIEW embedded technology to extend LabVIEW graphical development and target field-programmable gate arrays (FPGAs) on NI reconfigurable I/O (RIO) hardware.
    Message Edited by My NI on 08-13-2009 10:07 AM
    Regards
    MY

Maybe you are looking for