What are the document upload limits?
I have placed five document upload sections on a FormsCentral form that I have created. Are my customers going to encounter any problems with built in limits that do not allow more than one or three documents to be uploaded for a single form?
Only limit is file size. Total of all files uploaded cannot exceeded 20MB.
http://forums.adobe.com/docs/DOC-2656
Similar Messages
-
What are the DC power limitations for the ipad.
What are the DC power limitations for the ipad in a car or airplane. Can I use and recharge the ipad in a car or airplane with a 28 VDC power system?
The iPad charger produces 5V and 1000 mW. You would need an convertor accessory which is compatible with the iPad charging system and produces these output levels
-
Hi All,
We are migrating from on-premise SharPoint 2010 to SharePoint online 2013.
I have few questions below:
What are the possibilities and limitations of using Out of the box content search webpart?
Also, how the cross site publishing will work in SharePoint online something with managed navigations and product catalog apporach? if it is not supported, then what are the alternatives to acheive the same?
Appriciate any commnets/clarifications.Thanks in advance.
Thanks,
Dhananjay.Here are the possibilities of Content search webparts
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://office.microsoft.com/en-in/office365-sharepoint-online-enterprise-help/when-to-use-the-content-query-web-part-or-the-content-search-web-part-in-sharepoint-HA104206662.aspx
Compare the strengths and limitations of the Web Parts
It’s important that you understand the strengths and limitations of the two Web Parts because if you choose the wrong one, your site could run into performance problems. You can use both Web Parts to show content that is based on a query. In a simplified
world, here’s how you can decide between the two:
Use the CQWP when you have a limited amount of content, your query is simple, and you don’t expect your content to grow much in the future.
Use the CSWP in all other scenarios when you want to show content that is based on a query.
The table below gives a comparison of the two Web Parts:
Web Part behavior
Content Query Web Part
Content Search Web Part
Query configuration
Easy
You’ll need to know about certain search features such as
managed properties.
Query across large amounts of content
Limited
Yes
Handle complex queries
Limited
Yes
Scale to handle future content growth
Limited
Yes
Display content from other site collections
No
Yes (see
section below)
Design of query results can be customized
Yes, by using XSLT.
Yes, by using HTML.
Maintenance cost in a complex site architecture
High
Small (see
section below)
Narrow down the query results that are displayed in the Web Part
No
Yes, in combination with the
Refinement Web Part.
It was not there previously but then it was added to Office 365
http://blogs.office.com/2013/10/29/search-innovations-for-site-and-portal-design-in-sharepoint-online/
If this helped you resolve your issue, please mark it Answered -
What are the trial version limitations of PE8?
What are the limitations of the trial version of PE8?
I'm wondering if I can burn a project for now or if there's a limit placed on the trial version of PE7. I do intend on buying unless it seems a bit klunky when doing choppy projects.Mr. Kareemer wrote:
What are the limitations of the trial version of PE8?
I'm wondering if I can burn a project for now or if there's a limit placed on the trial version of PE7. I do intend on buying unless it seems a bit klunky when doing choppy projects.
Any projects burnt will contain an Adobe Watermark.
The download version does not include all the templates of the bought version (although you can download them separately).
There is no Photoshop.com integration (although unless you are in North Americas thats the norm).
Cheers,
Neale
Insanity is hereditary, you get it from your children -
If you want to set up a iphone plan in store, what are the documents you need ?
when doing a instore setup what are the required things needed. Say this is your first iphone ?
Credit card & picture ID should be all that is needed. If you've never had cell service before, they'll run a credit check.
-
I am looking for any official SAP information on the limitations of transaction volume supported by B1. I have a client that will be recieving 10,000 web orders per day, of one or two lines on each order. B1 can likely handle taking these orders through a third party system like Ibolt. But the question is about SAP performance when we are adding 10,000 BP's per day, generating 10k deliveries and invoices per day. Will B1 slow down too much, even if we put strong hardware in place. The tables will grow rapidly and users searching for BP's or marketing douments and running reports will not wait for the system when they search. Has SAP released any benchmarks about performance and limits? Thanks
Hi Peter,
SAP B1 is a solution for small and medium companies. it would be better to use SAP A1 if you want to implement in large companies.
Rgds,
JimM -
What are the billing documents are generated
hai
what are the documents generated after delivery.
2) what are the billing douments u will after delivery
3) after invoice how it will be appear in financial accountingHi nag,
1).what are the billing douments u will after delivery?
Ans. Accounting and profitability analysis documents
2). after invoice how it will be appear in financial accounting?
Ans. Customer acc. credited and com. acc. debited
Reward points pls.
Regards,
Govind. -
What are the Update tables?
In LO Delta scenario, Data posted parallel into document tables and update tables. What are the Document tables? What are the Update tables?
Give example for Application 11, which is document tables, and update tables?Hello Mannev,
Document tables are the actual application tables where the data is posted when you post a document in R/3.
Examples can be MSEG, VBRK etc.
Update tables are the intermediate tables which store data read from document tables. The V3 runs collects deltas in form of LUWs from these update tables and populates the delta queues.
hope this helps..
thanks, -
What are the limitations or disadvantages of SOA Direct Binding
What are the limitations or disadvantages of SOA Direct Binding.
When we call SOA service from another SOA service most of the time Local RMI call is used even you are using SOAP over http to invoke the service, this based on your SOA configuration - Refer the following url for more details on Local optimization.
Albin's Blog: Configuring Local Optimization in Oracle SOA 11g
SOAP binding will help us to invoke the service exposed with WSDL and accepts XML as request/response.
HTTP Binding will help us to invoke any services that will accept HTTP GET/POST messages but there is restriction with input/output message type(refer this document for more details Getting Started with Binding Components - 11g Release 1 (11.1.1.7)).
HTTP binding is light weight and provides better performance.
I hope this will help you.
Refer https://forum.java.sun.com/thread/2612466 -
What are the uploads and downloads speeds
what are the upload and download speeds of the time capsule?
what are the upload and download speeds of the time capsule?
If you are asking about Internet download and upload speeds, this is limited by your service plan with your Internet provider.
It might be something like 10 Mbps download and 2 Mpbs upload, for example. That's because on most home plans, the download speeds are typically much faster than the upload speeds....unless you opt for a business type connection at significantly higher cost.
The Time Capsule is capable of much faster speeds than your service provider can ever deliver, so the bottleneck on your network will always be the Internet connection...not the Time Capsule. -
What are the sources system will pick the document type while creating invo
hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi -
What are the img setting to be fullfilled while copy the Sales document typ
Hi What are the setting to be fullfilled while copy the sales document type and item category.
Note: I have already copied, but unable do the PGI(Post goods issue), and Billing.
Thanks
PrasannaHi
Answer for this Question.
we have set the copy control for sales order type and delivery and billing
Regards
Prasanna R -
What are the Master data that should be uploaded for Go live
Can any one tell me what are the SD master data that should be uploaded during GO live
Hi Prem,
SD Master data includes:
- Customer Master data
- Material Master data
- Customer-Material Info records
- Enterprise Structure info (Dist Channels,Divisions etc)
- Condition Master Data in Pricing.
I believe, all these need to be uploaded during GO Live.
regards,
Raj -
SSAS Tabular in DirectQuery - What are the workarounds for formula limitations?
Hello,
I need to create an SSAS Tabular model against the database of a live, real-time, line of business transactional system (i.e. a CRM).
The business requirement behind it is that we need to create some complex reports against live data, and our DW is only updated daily.
This live model will however be partitioned with a time-variance limitation (e.g. only records which are XX old can be returned).
Now here is the challenge. Since I am querying live data, then I believe the model must be configured in DirectQuery model. Am I right?
The issue is that DirectQuery mode is full of formula limitations. So my concern is, if I need a calculated column or measure that I cannot make it work due to DirectQuery limitations, then what are the alternatives?
Remember that the data source is from a live system, so it is not like I can create columns and measures in the underlying relational database.
Please advise.
Regards,
P.Hi pmdci,
According to your description, you want to use some functions in calculated measure which are not supported in DirectQuery mode. Right?
In Analysis Services Tabular, since DirectQuery has the real time access and scalability, this comes with a price of restrictions on a number of DAX functions and missing Calculated Column feature. Generally the workaround for these scenarios
is replacing those functions with other functions which are supported in DirectQuery mode, or create columns in the data source. However, as you said, your environment is not possible to create columns in the database. And a lot of those limited
function are not replaceable, like time intelligence functions. So actually, there's no really effective workaround currently.
For you requirement, I suggest you submit Microsoft a feature request
at https://connect.microsoft.com/SQLServer
so that we can try to modify and expand the product features based on your needs.
Best Regards,
Simon Hou
TechNet Community Support -
What are the appropriate document/stage dimensions in Flash for tablet optimized apps?
What are the appropriate document/stage dimensions in Flash (width x height in pixels) for tablet optimized apps?
(Dec. 2013)
Using Flash and AIR for Android/iOS I would like to develop a educational interactive title optimized for tablet PCs, hopefully both the Android but finally also the iOS platforms. With so many tablets on the market today and with different resolutions (and even aspect ratios) I have difficulty deciding what document/stage size to set for my project/app. I have been experimenting with an Android Google Nexus 7 and Samsung Note 10 tablets and discovered that Android automatically resizes the app's stage to fully fit the screen of the tablet BUT this creates the following two issues for me:
if the stage/document size in Flash is too small and I include bitmaps when the app's stage is enlarged to fit the tablet screen the bitmaps look pixelated.
If I make the stage dimensions too big so that there is no bitmap pixelation because the bitmaps will be shrank instead of enlarged, I am afraid that on some older tablets with slower processors the app may be too slow to run (but I have to say that I did not experiment with very large stage dimensions yet).
Until today I had looked at some of the most commonly used tablets on the market and their resolutions Google Nexus 7, Samsung Note, iPads etc and was inclined towards using a stage size of approximately 1280 x 720 pixels which I considered a medium solution, but now the new generation tablets came out (Nexus 7 gen 2, iPad Mini with Retina, iPad AIR etc) with much higher resolutions so I don't know what size to use now. Anybody has any suggestions?
I would appreciate any ideas and suggestions on this matter.You explained your problem well enough that looking at the picture won't matter. It looks like you found out too late that one of the first things you should do when you create a Flash file is set the movie properties, which include the dimensions and other things like background color, frame rate, publish settings, etc. While the string that I just listed can pretty much be revised anytime, the dimensions should really be done before anything else, when possible.
One way to go about resizing is to leave the file as is and specify the larger dimensions in the html page code. This could end up reducing the quality of any bitmaps you might have in the file(s) since you would essentially be enlarging them, but any Flash drawn elements will resize cleanly.
If you resize the stage, then you don't have much choice but to resize and relocate everything in it keyframe by keyframe.
Maybe you are looking for
-
Keyboard and trackpad temporarily unresponsive after mac is woken from sleep or battery runs out
I am having problems after my battery runs out completely or when I open my macbook a day later with the battery charged. If my battery runs out, after I plug it in and turn it on, the first thing that appears is the login page and there is a dark g
-
How do I keep McAfee from being downloaded when I update Acrobat?
How do I keep McAfee from being downloaded when I update Acrobat? I'm being spamed by Acrobat!
-
E-Recruitment,Syncronization for Employee and Business Partner not working?
hi there, i itend to create a business partner for employee in SAP E RECRUITMENT but when i run the report HRALXSYNC for an employee, the result i am getting is total blank. I suppose there should be some errors if it is not working properly, but the
-
Eclipse + Jboss + Lomboz And Sap Jco
Hello Friends, I am using the Eclipse, Jboss with Lomboz plateform to develop the J2EE application using Sap JCO, But when in my servlet i try to establish the connection with SAP R3 it gives me following error! HTTP ERROR: 500 com/sap/mw/jco/JCO. No
-
File already exist when calling tcp listen
i was using some modified versions of tcp/ip vi's at http://www.sheldoninst.com/support.html but everytime i start the server, it gives me an error 2 "file already exist" message. has anyone tried their vi's at sheldoninst?