What are the effects of checking the checkmark box in a list?

In an iTunes (Mac) list of Music, what are the effects of checking the checkmark box in a list?

If the box is left unchecked then the music will not sync or play when part of a playlist

Similar Messages

  • For each song in my iTunes Library just before the name of the song there is a check box.  What is the effect of checking or unchecking this box?

    For each song in my iTunes Library just before the name of the song there is a check box.  What is the effect of checking or unchecking this box?
    Thanks

    Unchecked items will not play unless specifically clicked on.  They will not be included on shuffle and will not be synced to ipods.

  • My mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be?

    my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
    also i noted that it has only been doing this since quite recently, before it was fine
    please help!

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac?

    Just bought an IPod nano 7th generation.  I have a Mac computer OS X v10.5.8 with 10.6.7 iTunes player. To use the new IPod nano I need a OS X v10.6.8 or later and iTunes 10.7 or later. What are my options to upgrade the Mac? 
    Thanks to your feedback.

    Click here, check that your computer meets the requirements, purchase and install the DVD, and run Software Update.
    (74380)

  • What is the command to check the changes in the spanning-tree topology?

    What is the command to check the changes in the spanning-tree topology?

    Hi,
    Few commands which would help are:
    1- Show spanning-tree detail
    2-show spanning-tree detail | in ieee|from|occur|is exec  >> This will give from were the changes occuring- Ex:
    C6K1#show spanning-tree detail | in ieee|from|occur|is exec  
     VLAN0001 is executing the rstp compatible Spanning Tree protocol
      Number of topology changes 9536 last change occurred 00:00:29 ago
              from GigabitEthernet4/6
    3- show spanning-tree active  *& show spanning-tree root >> Will give you the root information.
    4-  show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
    STP running MST:
    ===============
    show spanning-tree mst configuration  >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
    show spanning-tree mst detail
    show spanning-tree mst <name of the region>
    Debug on STP:
    ============
    debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
    HTH
    Inayath
    *Plz rate if this info is usefull.

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

  • Since downloading IOS8, when I log in to certain websites that are password specific and check the stay logged in box, when I return to the home screen then back to the website I have to log in again which is very frustrating

    Since downloading IOS8 when I log in to certain websites that are password specific, despite checking the keep logged in box, when I go back to home screen then back to website, I have been logged out and have to log back in-very frustrating-any ideas please?

    To see registered devices in My account:
    1) Go to Account > My Account
    2) Scroll down, and ensure that that you first have an active subscrption (if you do not, you are not logged in to you Ovi Music unlimited account)
    3) Below Unlimited downloads subscription box, you should have a Registered devices box.
    Cheers,
    elin
    http://www.nokia.com/support
    Attachments:
    Music account.jpg ‏13 KB
    registered devices.jpg ‏49 KB

  • What are options available to cancel the Excise Invoice?

    Hi,
    What are options available to cancel the Excise Invoice?
    Does cancelling the commercial invoice automatically cancels the excise invoice
    if not what are the other options?
    Any settings required to achieve that.
    Usefull answers will be rewarded
    Thanks
    Regards

    Dear Rajiv
    No cancelling commercial invoice will not cancel the excise invoice in background.  For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group.  Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
    thanks
    G. Lakshmipathi

  • What are strengths and weaknesses of the sap.m.Shell and sap.m.App as container for an application wrapper?

    My question today: What are strengths and weaknesses of the
    sap.m.Shell
    and
    sap.m.App
    as container for an application wrapper?
    I currently use non of them, but I see the advantages.
    SAP best practise is to use one of them or nest them as shell > app. What are strengths and weaknesses of the approaches?

    We prefer to say, the tender mercies of the Fetch block.
    You'll notice the "wfm info" cluster as an output of the Fetch
    VI.  This cluster has gain and offset members- use these to scale
    your binary data to floating point voltage representation.
    As you point out, the numbers won't be exactly what you expect given
    the vertical range and the device resolution.  There are a few
    reasons for this.  First, we don't use the absolute full scale of
    the ADC for the maximum input voltage.  There are a couple of
    codes of headroom at the top and bottom.  This allows your input
    signal to slightly exceed the specified vertical range without clipping
    (you'll get a warning from the driver).  Second, these gain and
    offset numbers take into account calibration information for your
    device.  Using these numbers will correct for small deviations
    from the ideal offset and gain.
    So if you use the gain and offset numbers from the driver, your
    measurements will be more accurate than if you assume 0 offset and
    perfect gain.  They will be most accurate if you make sure to
    perform a self-calibration once the device is in your system and at the
    temperature that your tests will be run.

  • How to view what are all programs maped with the event....

    I am new to this events concept - could you please say
    in SM64 we can give Event....
    <b>How to view what are all programs maped with the event..</b>
    Thanks in advance.

    Hi Sam,
    See these links:
    How-to trigger a process chain using ABAP?
    Re: scheduling process chain 3 specific times a day
    NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
    Hope this helps.
    concerning to sm64 ..
    Triggering events manually ...
    Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
    example : JOB_OPEN to create a background job..
    When scheduling a background job, you can specify it to start "after event".
    If you do so, you'll have to create an event in SM62.
    If a job is scheduled after event event and you trigger the event with SM64, the job will start.
    Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
    Reward if helpful.
    Regards,
    Harini.S

  • If your Lightroom 6 is crashing in the Slideshow module, check the SAMPLE RATE of your music track

    After spending over 2 hours with an Adobe technician who had control over my Windows 7 machine, I've learned something that I don't think Adobe knows yet...  I upgraded from LR 5.7 to LR 6 (not CC) and began having issues when I was working in the Slideshow module.  When trying to add a music track, Lightroom would crash ("unexpectedly quit").  I couldn't for the life of me figure out why.  I turned off the GPU since a fair amount of chatter on the forum related to that, but it didn't change anything.
    So I finally waited patiently for the Adobe Chat line to finally get a tech to respond...and he was exceptionally detailed and methodical in his approach to diagnosing my issues.  I could follow on my screen as he did a variety of things that indicated he understood what he was doing.  Unfortunately he got to a point where he thought (as did I) that he had found the problem/solution...which he thought was related to the bit rate.  He concluded that music with a Variable Bit Rate (VBR) as opposed to a Constant Bit Rate (CBR) was causing the problem.  Also unfortunate was that this "discovery" was near the 2-1/2 hour mark and we did not apply the scientific method to property determine if we had narrowed down to cause/effect.
    Based on my further analysis, he was close, but not right on.  It isn't the BIT rate mode that is causing the crash, but rather the SAMPLE rate.  Turns out that the vast majority of songs in my iTunes library have a sample rate of 44.100 kHz--and those work just fine.  However, I have about 15 songs, mostly downloaded as free background music from the YouTube creation library, that have a sample rate of 48.000 kHz--every single one of those cause my LR6 to crash.
    If you're having a problem with Lightroom crashing in the Slideshow module, check the SAMPLE RATE of your music track.

    If you're on Windows, check out a free program called Audacity--it's fantastic.  With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

  • How to remove the "Image Mask" labels under the effects tab in the Inspector window

    I'm still trying to find my way round Final Cut Pro X after using Final Cut Express for many years. I don't know how I have manage to finish up with two Image Masks being set under the effects tab in the Inspector window. The Image Mask effects are not active (the box adjacent to the label is not blue) How can I remove the Image Mask label from the Effects tab in the Inspector window?
    Thanks JohnH

    JohnHutchinson wrote:
    … How can I remove the Image Mask label from the Effects tab in the Inspector window?
    just click onto the grey bar and…
    … and hit 'delete'/back-space key.-

  • I have a problem with the effect gallery and the saving libraries in Illustrator CS6

    Hi everybody
    I have a problem with the effect gallery and the saving libraries in Illustrator
    1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
    2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
    3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
    Many thanks in advance for the help .... I look forward for the reply =)

    I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
    Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
    Please, somebody, HELP.

  • Kindly let me know the transaction for checking the Status of par.User?

    Kindly let me know the transaction for checking the Particular Users Status?
    I mean to say,Which Transaction is he into?
    Or Is he/She Logged on to a particular System?
    Regards,
    Shashank.

    Hi,
    Go to Transaction SM04.You will find the List of Users And the List of transactions ther are currently using.
    Regards,
    Sujit

  • "Scrolling Tab" in the "Effects" link of the "Control Panel"

    I've been trying to follow along with the tutorial of adding Parallax scrolling in Adobe Muse CC websites by Brian Woods.
    The Scrolling Tab is not showing in the Effects link of the Control Panel.
    How do I get it there?
    Thanks for your help.
    Mike

    Hi Mike
    Please enable Scroll Effects from Window in Muse main navigation menu and then you can see scroll motion in pallet area.
    Thanks,
    Sanjit

Maybe you are looking for