What are the effects to plug-in development when updating InDesign CS version to CC version?

Will there be a CC version SDK available? Or the CS6 plug-ins can be loaded in CC version? Otherwise the plug-ins are required to be re-compiled?
Is there any official documentation about the inDesign development in CC?
Thanks a lot.

The plug-in for InDesign CS6 is incompatible with InDesign CC.
InDesign CC is a 64-bit application, Cocoa native on Mac OS.
You need to use the SDK for InDesign CC, but not available yet.

Similar Messages

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

What are the effects in processing office 2007 document filtering in Oracle

Does any one know what are the effects or changes in Oracle text (9i - 9.2.0.4.0) while handling the MS office 2007 file formats?
Does Oracle 10g solves the problem or will there be any patches released for this issue?

No I am not having any specific problems at the moment. I may be upgrading to 2007 office and i want to make an assessment.

What are the effects on BW when R/3 system is down?

Hi BW Experts,
What are the effects on BW system, when R/3 systems are down for maintenance?
And what care we need to take towards BW during the down time?
Thanks in advance.
Regards
Sunil.

Hi Sunil,
when R/3 system is down the BW daily loads & weekly loads will fail.
the best solution is you can reschedule the job when R/3 is Up.
You can cancel the running jobs by going through
SM37 -- > select that particular job --> JOB (in menu bar) --> select released --> schedule option.
Mama 10 points evvu mama
Regards,
Lakshman Kumar Ghattamaneni

What are the effects of checking the checkmark box in a list?

In an iTunes (Mac) list of Music, what are the effects of checking the checkmark box in a list?

If the box is left unchecked then the music will not sync or play when part of a playlist

What are the advantage of using Oracle Database when compare to SQL SERVER

Hi all
Please tell anyone about
what are the advantage of using Oracle Database when compare to SQL SERVER
Thanks in advance
Balamurugan S

user12842738 wrote:
Hi,
There are various differences between the two.
1. SQL Server is only Windows, but Oracle runs on almost all Platforms.
2. You can have multiple databases in SQL Server, but Oracle provides you only one database per instance.Given that the very term 'database' has s different meaning in the two products, this "difference" is absolutely meaningless.
3. SQL Server provides T-SQL for writing programs, whereas Oracle provides PL/SQLWhich means what? Both products have a procedural programming language. They named them differently, and the languages are not interchangeable. Means nothing in comparing the features/strengths/weaknesses/suitability to purpose.
4. Backup types in both are the same. (Except Oracle provides an additional backup called Logical Backup.)You make that sound like "Logical Backup" is something more than it is. It is nothing more than an export of the data and metadata. Many experts don't even consider it a backup. I'm sure SQL Server provides the same functionality though they probably call it by some other name.
5. Both provide High Availability.Well, I guess they both have a suite of features they refer to as "High Availability". But what does that really mean? The devil is in the details. Remember, the two products don't even agree on what constitutes a "database".
6. Both come in various distributions.???
>
If you are going for an Implementation, you can try SQL Server Express Edition and Oracle XE which are free to use.
Then you can choose whichever is comfortable for your needs.
Thanks.

HT1491 What are the answers to my security questions when I want to purchase something?

What are the answers to my security questions?

Blue, Chicago, and The Kansas City Chiefs....
How should we know? You set them up, not us.

What are the problem you face in sso when u do that?

plz let me know hte ans for this quesion?

Hi Anandan,
I can give you the steps for establishing sso.
1.Set the profile parameter login/accept_sso2_ticket = 1. Set login/create_sso2_ticket = 0 unless the server should also be able to issue tickets. (Use DEFAULT.PFL). Remember you need to talk to the ever helpful basis person to get this done.
2.Download certificate from the Web AS (OR) Enterprise Portal. (Talk to your Web AS administrator or the EP System Administrator)
Web AS:
In the Visual Administrator, press on "Export" button "Server -> Services -> Key Storage -> Ticket Keystore -> SAP Logon Ticket Key Pair-Cert" Enterprise Portal:
Press on button "Download verify.der File" - navigate using link given below. "System Administration -> System Configuration -> Keystore Administration-> SAP Logon Ticket Key Pair-Cert"
3.Go to transaction "STRUSTSSO2", add the certificate (Talk to your ABAP Basis person again)
4.Add to the ACL. You have to enter the WPS System and the WPS Client. WPS System: <Instance Name> - click on the certificate and take the "Issued By" value WPS Client: Enter this as "000" (3 Zeroes)
5.If you want to allow access to more than one client using the digitally signed certificates then you need to log into the R/3 system in that client and add to ACL alone again.
6.Create the equivalent user IDs in WebAS/EP as in the R/3. If you don't want to create as many equivalent users then do "User Mapping" (Refer to Help portal). But then to begin with I suggest you to create corresponding users even if you are enabling SSO for many users.
7.In the "Webdynpro Content Administrator" Change JCO connection settings accordingly: I. Set Model data logical destination to UseSSO. II. Set Metadata logical destination to DefinedUser (because metadata is common for all users)
During runtime only the user IDs in the UME and the R/3 are verified. If they are the same then it would allow access as per the authorization for that user in the R/3 system. So the passwords can be different.
Warm Regards,
Murtuza

What are the main security considerations to develop Apps. whit MIDP?

Hello everybody, I'm doing an investigation about this topic, so, It would be great to know the commnunity's opinion, if somone has an opinion about this topic please answer. Please consider the access to a Web service using a Http connection and whatever you think is important.
Thanks.

tar_mynastyr wrote:
Thanks for a hint. Of course I have already studied different crawlers, including Burp, Heretix, WebScarab. No, it's not "of course". Many people asking questions here do very little research. So, if it's not explicitly stated in the original post that some sort of research is done, it is not "of course" in my book.
The point of my question was not how to develop a new crawler, That's not what you said. In the second sentence of your original post, you said: "I am going to develop a java based crawler". Perhaps you are now focusing on other aspects of the project and you are planning the development of a crawler at a later time, my recommendation still stands: use an already built one. And if it wasn't your meaning to write your own crawler from the start, well, then the sentence "I am going to develop a java based crawler" is a bit misleading, IMO.
Or we have a different opinion of what a webcrawler is...
Anyway, best of good luck with your project: sounds like fun!

What are the effects of changing master data in bw

hi gurus
we have changed a plant (#1234) master data it was under comapany code(12) now it is under comapny code(59) on the r3 side, now there is data in the cubes already which was loaded before the change, and we still want to use it, but since master data has changed and reloded, what will happen when i run reports on the old data,
secondly i know i can use time dependant objects but my question is what will happen if i dont use it. will the old data run fine under the new comapny code? and what other things will this change effect.

ok whats confusing me is that suppose we have this record in the cube
Comp Code       Plant     kf
   16                   9823     45
comp code & region is an attr of plant and this is the new master data
plant     comp code region
9823        39              CA
and this is old master data
plant     comp code region
9823        16              TX
now when the user tries to drill down by region on that transaction record what will he get for region

G5 2GHZ what are the effects of low or unstable power supply on a G5?

Hello
I have installed a identical 3 G5 avid systems in prague for editing. 2 of the systems work fine. Third station has a recurring problem. For some reason, at a given moment, the G5 starts having very strong fan flutters, locks up and then won't restart. When it does restart some minutes later it either works fine or it can have a kernel panic. When the machine is returned to the office, the machine works fine and the problem does not recur. Hence, I figure it is something to with the installation or its location. I have started to put aside the other avid equipment aside as culprits as the result is the same even when I soft accessories around.
You may say that the machine is dead etc. The thing that is very strange is that THIS IS THE THRID MACHINE I HAVE REPLACED AND THE PROBLEM CONTINUES.
I have not yet exorcised the room but I might try. In the mean time, I am wondering if there is a power supply issue at the socket. The system has a UPS for power protection. Any ideas?

chlowden-
Yup, I am leaning towards AC. Do you have any way of testing the outlets? It could be a bad ground or something along those lines.
Do the UPS's have Automatic Voltage Regulation? If it does not, it is possible that the sags are being passed on to your equipment, especially if the UPS threshold is low.
Luck-
-DaddyPaycheck

KMDF Driver. What are the recommended limits for buffer size when calling WdfCommonBufferCreate

Hi,
I have a customer who wants to really stress-test his PCIe hardware. His idea is to declare two 8 GB buffers alternately filled by application software and fetched by scatter/gather DMA in the hardware (Transfer to PCIe card). If I calculate this through,
this is a maximum of 2M scatter/gather elements per buffer or 32 MByte, assuming S/G element is 16 bytes. i.e. 64 MByte logically contiguous memory as a common buffer for storing the S/G lists. The test system will have plenty of memory, 32 G upwards.
Still don't think I am likely to get a 64MByte common buffer from the system or even two disjunct 32 Mbyte buffers. If I look at poolmon on my server, the current size for NP is only 86M
So I expect the driver will have to handle multiple calls to EvtProgramDma, each covering just part of the 8G to be transferred.
Still I have two questions:
1) Are there any recommendations, house numbers from experience etc. regarding what is a usable maximum size I can reliably get for a common buffer with a call to WdfCommonBufferCreate (percentage of NP pool?, absolute number? ...). The common buffer is
for storing the S/G elements for the HW DMA controller
2) If I just declare a huge array of SCATTER_GATHER_ELEMENT[4M] or 2x huge arrays SCATTER_GATHER_ELEMENT[2M] in the device context (to be managed later by WdfMemoryCreatePreallocated() etc.) , will windows refuse to load the driver because the driver footprint
is too large?
We are talking about Windows 7/x64
Thanks,
Charles

Don,
thanks for your reply. The card is always physically present in the test system which means I could load the driver at boot time, but it would have to be after PCIe enumeration of course.
So far I have always managed to avoid writing a boot-start driver, my main objection being for "purist" reasons. I understand the MS documentation to mean that boot-start is really only intended for devices that are required to boot the system
(disk, console, keyboard, maybe network ....). I am aware of the advantage of boot-start though, a much higher probability of getting contiguous memory in larger chunks. This driver however is definitely not relevant for system start. The add-in card is essentially
a high performance source of test data and only runs when a SW application has been started.
The card does have high performance scatter/gather DMA support also 64-bit addressing capability.
I do wish Microsoft would issue some guidelines regarding realistic sizing of common buffers, it would make my discussion easier. Yes, I could write a test driver and measure it out but I don't really have time for that. Microsoft surely have test/application
teams for figuring these things out.
Charles

What are the criterias to consider while deciding when to run the mrp?

Hello Friends,
Actually i was just thinking,if any company wants to run the mrp for planning than how to decide,when to run the mrp(daily,weekly,monthly).
One of the factor,while deciding this could be the raw material procurements,right?if they procure raw material once in a month than they should run the mrp once in a month.(even we can control this by keeping monthly lot size,if you run the mrp every week).
What could be the other reasons?
Thanks and Regards,
Jitendra Chauhan

Dear Jitendra,
As said by our other forum friends it depends on the business requirement.
In one of my project as the client were recieving monthly plan for their production MRP was carried out monthly.
It can be based on the production plan or say sometimes the maximum lead time for producing a product.
Also Check this link,
[MRP Activities|http://www.sage.co.uk/sage1000v2_1/form_help/workingw/Subfiles/mrp_activities.htm]
Regards
Mangalraj.S

What are the general effects of using recovery mode, and is it possible for one's data to be backed up on to it afterwards?

My iPad, in my opinion is a great device to have whenever I need to use it for work - mainly using it for creating music. However I feel that it's a bit outdated, and I plan to get a new iPad Air for this holiday season and give this one to my children. That being said, I have stumbled across a weird problem that keeps me from backing my iPad (generation 2) up to my computer. The error in question states that "The iPad is currently owned by another computer." By looking around on the internet, I was able to deduce that one of the ways to solve this problem was to put it in recovery mode to get rid of the 'ownership', and this seems logistical. The problem I'm facing now, is that, after trying to find the answer, I do not know how recovery mode has an impact on all the data stored on my iPad. To clarify the question into three parts:
1) Is there a way to back up files from my iPad and easily retrieve them without the use of iTunes?
2) If not, is there a way to get rid of the 'ownership' of another computer other than recovery mode WITHOUT jailbreaking it?
3) If still no, then what are the effects of putting my iPad into recovery mode, and will all of my songs and data be safe?
Thank you for answering, if possible.

Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it

What are the roles in CRM implementation Project(all generic extractions)

Hi Gurus,
Now I am placed from a support project from BW (CRM) implementation project(all are generic extractions).
& I am also new to implementation project.
what are the neccessary steps to be taken when we are implementing BW for CRM.
Gurus please clarify my doubts.
1. what are the steps in implementation project in detail(as a developer).
2. what are the sizes of the cubes,ODS & How to decide them.
3. what are the neccessary steps for Master data & Transaction data.
4.How to make the functional specifications for Infoobjects,cubes,ODS,Remote cubes,Multiproviders.
5.can we change to delta loads to full loads if yes what happens to existing data.
6.How flat file extraction used in the case of crm& how to do ascii format.
7.What are the steps to be taken when we are creating Queries & Reports in BW CRM.
It's very urgent.
thanks = points.
Bwcheta.

1. what are the steps in implementation project in detail(as a developer).
U have to basically to the techinal design after understnading the functional designs and implemnet the same( creating infoobjects, datatargets, datasources, queries etc.). Then u have to load data and do the unit testing on the same.
2. what are the sizes of the cubes,ODS & How to decide them.
Completely the business reqmnet and the data that the client wants to load.
3. what are the neccessary steps for Master data & Transaction data.
U have to understand ur master data and transaction data on the basis of whch u have create ur infoobjects and load data in them and finally in the datatarget.
4. can we change to delta loads to full loads if yes what happens to existing data.
Sure u can do that by choosing Full update in the infopkg. It will just load the complete data instead of changed records.
*Hope it helps.

What are the effects to plug-in development when updating InDesign CS version to CC version?

Similar Messages

Maybe you are looking for