What are the exact steps needed to create a slideshow?

When I follow the steps indicated in the help section of QT pro, all I get is a one slide only movie! It is a bit frustrating since I purchased this software mostly to be able to create slide shows. Am I missing something? Is there a maximum to the number of pictures that can be used to create one? Thank you kindly in advance for any suggestions that you may have.

Please give your work flow. Hard to tell were you going wrong without it...
Here a tut on Apple site.
http://www.apple.com/quicktime/tutorials/slideshow.html

Similar Messages

What are the exact steps to export a sequence from FCE 4 to idvd.

New to mac/FCE, I have attempted to export sequence to quick time movie then save onto desktop. Then I just dragged the quick time movie from desktop into idvd. This worked, but is there a better way. Thanks - Chad

That's the way you do it. If you making the DVD right away and have finished work on the project you can export a reference movie, not self-contained, smaller and quicker.

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What are the different steps to follow in order to develop an application and deploy it into a PAC

Hi,
I developped a program on my computer but in order to deploy it in a PAC , I don't know what are the different steps to follow?
What are the difference between a stand alone application and communication with server mode.
Can the file which will be downloaded into the PAC be in a form othre than (.exe).
what does the deployment licence consist of??? is it a software?
if the file is .exe then how to maintain it?
Thank you for all,
Regards

Hi!
   Since I'm familiar with FieldPoint PACs, I'll refer to that (but maybe it is similar for cRIO...).
   An embedded application (standalone), runs entirely and independently on the PAC, while if you're not doing this, you'll have your computer, with LabView, which is controlling the PAC. In this mode, application is dowloaded in PAC's RAM, so when you reboot controller, application will be lost. If you build an embedded application, you can provide for application to boot authomatically at boot, each time the PAC reboots. These are some basic stuffs on embedded applications with LV.
    To deploy an application to a PAC, you need LabVIEW + Real-Time module. Without it, you can't build an embedded application on PACs.
    usually, the file dowloaded is an .exe, and some libraries. What would you like to have, exactly? For example, I think you can buy a simple .exe, which is universal, which loads VIs dinamically, so you can download directly VIs, but I've never tried this way....
   Deployment license, I think, refer to PCs, id est, when you use a PC or PXI as embedded target, in PACs, you have it bundled (it seems to me) whit the PAC you buy, so you don't have to buy an extra license for every PAC you ship with your application. Otherwise, if you develop a Real-Time application for a PC, you will ship PC + OS licensed + Real-Time extension licensed, but this is not your case, since you'll use PACs.
   The maintain problem... I've already faced with! Simply, for my needs it was enough to make an application which loads configuration files, depending on different task the controller has to do. If you have to dowload a completely new version of VI.... it's better to deploy new application from LV. But maybe you can bypass this problem with dinamic VIs loading...
    Let me know if this help.... Have a nice day!
graziano

What are the correct steps for installing Oracle Entitlement Server SSM?

Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

What are the config steps for contract hierarchies and vendor hierarchies?

Hi friends
what are the config steps for contract hierarchies and vendor hierarchies?
Regards
Raj Kumar

Contract hierarchies
A function that enables users authorized to create a purchasing contract to define relationships between super- and subordinate contracts.
A contract hierarchy consists of one or multiple contracts and is subject to the following rules:
The top node of the hierarchy cannot have a superordinate contract
Every contract except for the top node has exactly one superordinate contract
Every contract can have none, one, or multiple subordinate contract(s)
A contract can be part of no hierarchy or exactly one hierarchy
Note:Contract hierarchies are only available for purchasing contracts. They are not available for global outline agreements.
You can activate this from SRM Server> Cross application settings>Activate Hierarchies for Product Categories, Vendors, and Contracts.
Note:
These hierarchy functions should not be reset once they have been activated.
Similiarly you can do this for Vendor Hirerachies.
Please visit link for more details: http://help.sap.com/saphelp_srm50/helpdata/en/43/2022b83fbc2be8e10000000a11466f/content.htm
Thanks

What are the configuration steps required ?

Hi
Gurus,
Client requires:
"We have construction going on at our warehouses and the projects are going
to take about a year. We need to track retainers on the payments we make to the contractor.
Payments are due in a couple of weeks and it is a priority to monitor progress on the construction."
Example:
                                                                GL Account#
Debit Construction In Progress                      122000          100%
Credit Vendor                                                601095            90%
Credit Accounts Payable / Retainage            202000            10%
At this time we have a request for a solution to process what is necessary
to compile with the following scenarios.
what are the configuration steps required.
Thanks
Anil

Hi,
Whether the contractors are treated as one time vendors or regular vendors. If you have to create new account group for subcontractors
Does only one account group related vendors need the retainage analysis or for all the vendors. Will be mainly the general contractors at each location One group is sufficient even they are at different location you can maintain the same in REGION
Does only single partial payment exists and the remaining due amount to be treated as due on a particular date or multiple payments exists against the same invoice. The 10% must accumulate in a liability account over the life of the contract and is paid at the end. There may be multiple of payments which you need to knock off against the service entry sheet(study above reply)
The construction cost which is treated as outstanding to Vendor to be exclusive of the cash expenditure made for such construction. Yes, but the entire 100% needs to debited to CIP Until and unless the work is not completed so how you can treat as outstanding payment to vendor. If you want you can maintain a provision for this
Check with above and above replies.
Regards,
Sankar
Edited by: Durgasankar.Innamuri on Jul 29, 2010 10:17 AM

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time

What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time

You would have neede to have "Find my phone" activated on the iphone
Log into icloud https://www.icloud.com/ and track.

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

What are the sequence steps involved in MM FLOW

what are the sequence steps involved in MM FLOW?
please explain.

Process Flow
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and under deliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Pur info record is nothing but a master data like thing which will be maintained for different materials to determine the prices etc.It Specifies the number that uniquely identifies a record.
For Example: an info record is based on Plant Vendor and Material
Based on these three the Material Prices will be calculated
for different combinations different values are taken into consideration.
During pricing it brings these values automatically based on this info record.
Use ME11 Tcode to create this record.
Common Tables used by SAP MM
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Tcodes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
regards,
srinivas
<b>*reward for useful answers*</b>

What are the installation steps for Oracle Fusion HCM

Hi all
I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
Thanks

If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
Atul has also posted some good stuff on installing:
http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

Does the IHandy flashlight app contain malware? ? If so what are the removal steps to insure the malware is removed??

Does the anyone know if the IHandy flashlight app contain malware?? If so what are the removal steps to insure the malware is removed??

There is no malware that can affect an iPhone unless it's been jailbroken.
Some apps request to do things, like access your location or contacts, and can continue to do so in the background. If this app requested permission for either of these things, you should delete it. A flashlight app has no need for such information.
~Lyssa

What are the mandatory fields needed to setup/register the SIP phone manually in CUCM

What are the mandatory fields needed to setup/register the SIP phone manually.Also, if someone can let me know the mandatory fields for Cisco based SIP phone and also the third party SIP hard phones like Avaya or any other Third party SIP phones both Soft phone and physical phone requirements...in CUCM
Please suggest...I need to know if MAC address is mandatory for all Cisco SIP phone to setup

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b09sip3p.html
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/112110-phone-add-00.html

What are the main steps to be taken care while doing recording for LSMW

Hi,
I am facing problem in LSMW.
Can anybody suggest me that What are the main steps to be taken care while doing recording for LSMW for recording mm01 ?
thanks'
naresh

Hi,
Recording in LSMW is similar as SHDB.
in LSMW after you give Project-Subproject and Object.
1)Go to-> Maintain Object Attributes -> double click
2)Press Display/Change Button at top left to make editable mode.
3)Select radiobuton -> Batch Input -> Give Recording name say Z_mm01
4) Click the Recording Overview boton on right -> Give TCode which u want to record....
Rest refer the Document link attached.
Please find the links to various threads on the same.
Re: LSMW - Using a BAPI
BAPI, IDOC in LSMW
Upload the data in LSMW using BAPI
This one is the most complete document for the same
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://service.sap.com/lsmw.
Regards
Kiran

What are the exact steps needed to create a slideshow?

Similar Messages

Maybe you are looking for