What are the fiber connectors

The rapid progress of information technology, it is for data, voice, images, multimedia communications, a growing demand for Ethernet broadband access methods have been mentioned, therefore more and more important position. But traditional Category 5 Ethernet cables can only transmit signals 100 meters, in the transmission distance and coverage can not meet the actual network environment. At the same time, large capacity optical fiber communication with its information, confidentiality, good, light weight, small size, no relay, the advantages of long-distance has been widely used, fiber optic transceivers is the use of this high-speed optical fiber transmission medium a good solution to the Ethernet in the transmission problems. In some large-scale enterprises, network building in the direct use of optical fiber backbone network for the transmission medium build, while the internal LAN transmission medium is usually copper wire, how to achieve the same optical fiber backbone network connected to the LAN then? This requires a different port, different line, different optical fiber link between conversion and guarantee the quality. The emergence of fiber optic transceivers, twisted pair electrical signals and optical signals to each other conversion, to ensure that the data packets in the smooth transfer between the two networks, while the network will limit the transmission distance of 100 meters from the copper wire extended to 100 km (single - mode fiber).
Then, what is the fiber connectors?

X2-10GB-T is end of life soon.
There is a SFP+ version like

Similar Messages

What are the tables Oracle EBS connector can connect to?

Hello,
Requirement
As part of the project requirement for Oracle EBS application, we have the concept of BUYER account (PO_AGENTS) and Supplier account (PO_VENDORS). When the account has to be disabled from FND_USER and HR foundation table, the account has to be disabled (or removed based on the requirement) from all linked tables "PO_VENDORS" and "PO_AGENTS".
Questions
1) Does the out of the box Oracle EBS connector handles removing users from the tables "PO_AGENTS" and "PO_VENDORS" apart from "FND_Users" and "HR foundation" table?
2) If no, what are the recommendations for achieving the above requirement?
Thank You!

No, OOTB the connector will not revoke the user entry from tables like PO_AGENTS etc .. You can customize the connector to do that .
Explore the stored procedure which can revoke entries from the mentioned tables and wire it via a adapter .
Regards
Suren

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the roles & responsibilities of GRC/SECURTIY CONSULTANT IN IMPLE

HELLO EXPERTS,
CAN U PLS TELL WHAT ARE THE ROLES & RESPONSIBILITIES OF GRC/SECURITY CONSULTANT IN IMPLEMENTATION OF GRC TOOL.
REGARDS,
SANJAY

Hi Sanjay,
The role of GRC & Securtiy Consultant is basicly the implementation of GRC Application in Customor envoriment. In most of cases he gives technical support for installation and configuration. What we are really do is following..
1. Preperation of System Landscape Concept --> Provide Hardware and Software spesifications to customer
2. Installation of Software Components --> This contains the installation of NW and GRC Components and also the installation of SAP Backend Components like Real Time Agents and the post-Installation configurations
3. Post-Installation and Basic Configuration --> Create Connectors and additional basic configurations
4. Hosting of Workshops for Risk Creation and Ruleset customizing
5. Implementation of Custom defined Rules in the Application
6. Test of Applications
7. Hostin of Workshops for Approval Methodology and Workflow Use Cases
8. Hostin of Workshops for Superuser Role Usage and Management of Superuser
9. Role Change and Creation Workshops in GRC ERM.
10 Documentation and Deliver of Custom Concepts for Compliant User & Role Administration
11. Handling of Error and Trobles.
this are my daily business...
Best Regards.

What is XI ? What are the role of an XI Consultant ?

Hi Everybody,
I am presently working as an ABAP Consultant since 3 years.Thinking for XI.
Can anybody tell me about XI.
What are the role of an XI Consultant ?
Is it a good option for an ABAPer ?
Reward is assured
Thanks in advance
Srikanta Gope

What is SAP XI?
SAP Exchange Infrastructure is SAPs platform for process integration based on the exchange of XML messages.
1. It provides a technical infrastructure for XML based message exchange in order to connect SAP components with each other as well as with non-SAP components.
2. It delivers business process integration knowledge to the customer in the form of SAP pre-defined business scenarios.
3. It provides an integrated tool set for building new business scenarios by defining and maintaining all integration relevant information. (Shared collaboration knowledge).
Before we take a closer look at how the Exchange Infrastructure will enter into the IT landscape of every SAP customer, lets take a closer look at the capabilities as well as the strategic direction of XI. This particular module of Net Weaver is one of the most powerful and is undeniably the most critical. Its purpose is really three-fold:
Connect:
XI has the ability to connect all applications regardless of whether it is an application
From a 3rd party or from SAP. The solution has pre-built connectivity to all SAP modules
Such as SAP CRM and utilizes the Adapter Framework to integrate 3rd Party solutions
such as Siebel, People Soft, Legacy systems, or AS/400s and Mainframes.
Coordinate:
XI has the ability to define a path/workflow for each business transaction that is
Integrated. The system actively routes each message to ensure that it is properly
Delivered from the source to the target destination. Active monitoring allows
Administrators to manage document exchange on an exception basis.
Communicate:
XI has the ability to translate files into any format whether an internal file format or any
Business to Business integration standard including but not limited to an XML format, an
EDI format, a marketplace, or a Web Service. Finally, there are multiple communication
Protocols included which allow the routing of a file over protocols such as s/FTP, http/s,
SOAP, ebMS, Value-Added Networks, or EDI INT (AS1, AS2).
Understanding The SAP Exchange Infrastructure_
Now, you might be saying to yourself, we already have solutions that provide all of this
Functionality. True, most organizations have invested previously in an integration strategy, but what we see in over 90% of organizations is that they have multiple translators and communication brokers, which they are supporting on a daily basis. This is both a resource drain as well as a monetary drain. For example, it is not uncommon to see the following even in smaller organizations:
Multiple Point to Point connectivity: For example, R/3 connected to a 3rd party
Warehouse Management Solution via an internally developed adapter or with the SAP
Business Connector
A 3rd party EAI Integration Broker to connect legacy mainframe systems to SAP and
WMS
A 3rd party EDI translator to communicate messages
A 3rd party XML broker to communicate XML messages to marketplaces and non-EDI
Trading partners
A communication server that focuses on sending messages via FTP, Value-Added
Networks and Internet protocols such as AS2 solution of choice for SAP end users
Interface-
Role of XI consultant
As a SAP XI Developer you will be required to : Gather requirements, develop specifications and technical documentation. Perform requirement analysis and high and low level design. Perform the coding, testing and integration mapping Interface with onsite / offshore project teams ,sometimes responsible for developing java applications based on clients requirement specifications, preparing the technical design document, creating prototypes, analyzing and identifying performance bottle-necks, providing technical and user documentation and training to client, providing relevant data to the Module Leader for status reports both.
It's a good option to switch to XI
regards,
srinivas
*reward for useful answers*

What are the maximum numbers of parameters that a subvi can be obtained?

What are the maximum numbers of parameters that a subvi can be obtained?

I'm not sure I understand exactly what you mean. Do you mean to ask how many parameters you can pass to a subVI? That would be a very large number because a connector pane can have a dozen or so terminals--and if each terminal is a cluster... You could pass a very large number indeed.
Having said that however, you probibly wouldn't want to. Remember the more parameters you're passing the more tightly coupled your code is--and the less reusable the code will probibly be.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

What are the technical specifications of the monitor Macbook

What are the technical specifications of the monitor Macbook Pro 15 "and 17"
The screen is IPS?
Qawl the viewing angle?
etc.

For example:
Monitor Size: 24 "LCD
Maximum Resolution: 1920 x 1200 at 60 Hz
Best: 1920x1200 at 60 Hz
Viewable Image Size (VIS): 24 "
Panel Technology: IPS
Color Gamut: 110% (CIE1976) / 102% (1931) / 100% (sRGB coverage)
Aspect Ratio: 16:10
Dot Pitch: 0.270 mm
Response Time: 6 ms Typical
Brightness: 400 cd / m²
Contrast Ratio: 1000:1 / 80,000:1 DCR
Horizontal Viewing Angle: 178 ° / 178 °
Connector Type Video Input: VGA, 2xDVI-D, S-Video,
Composite Video, Component Video, DisplayPort, HDMI
USB: Yes
Card Reader 8 in 1: Yes
Compatible with AX510 (Sound bar): Yes
Compatible with VESA wall mount: Yes 100mm
Screen Rotation: Yes
Height Adjustment: Yes
Compliance Energy Star: No

What are the user defind functions

hi all,
what are the user defind functions.
Regards,
priya

Hi Priya,
Generally we will complete our mapping things with the help of Standard Functions itself those are available in Graphical Mapping.
UDF are used when the mappings are unable to complete with these standard functions then we need to write small piece of Java code and can achieve that functionality.
Steps to UDF
Activities
1. To create a new user-defined function, in the data-flow editor, choose Create New Function (This
graphic is explained in the accompanying text), which is located on the lower left-hand side of the
screen. In the menu, choose Simple Function or Advanced Function.
2. In the window that appears, specify the attributes of the new function:
Name
Technical name of the function. The name is displayed in the function chooser and on the data-flow
object.
Description
Description of how the function is used.
Cache
Function type (see above)
Argument Count
In this table, you specify the number of input values the function can process, and name them. All
functions are of type String.
3. In the window that appears, you can create Java source code:
a. You can import Java packages to your methods from the Imports input field, by specifying them
separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since
all message mappings require these packages and therefore import them. You should be able to
access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the
package under Import. In other words, you do not have to import it as an archive into the Integration
Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the
SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as
archives and that are located in the same, or in an underlying software component version as the
message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.
4. Confirm with Save and Close.
5. User-defined functions are limited to the message mapping in which you created the function. To
save the new function, save the message mapping.
6. To test the function, use the test environment.
The new function is now visible in the User-Defined function category. When you select this category,
a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the
function to the data-flow editor, choose the arrow next to the button and select from the list box
displayed.
REgards
Seshagiri

HT203987 What are the advantages of upgrading my Mavericks OS to Yosemite?

What are the advantages--if any--of upgrading my OS Mavericks to OS Yosemite?

etresoft wrote:
Barney-15E wrote:
it should be able to AirDrop to any iOS device and to any 2012 or later Mac (2013 Mac Pro).
Nope. http://support.apple.com/en-ca/HT204144
Even that limited list in the Apple support article is incorrect. It says any of those can AirDrop with "a Mac with OS X Yosemite". That is wrong. You are the one that is correct about the Mac support, not Apple.
Ahh, yes. I was going by this, http://www.apple.com/osx/how-to-upgrade/, but I didn't see the Lightning connector.

What are the difference between TopLink and TopLink Essentials...?

What are the difference between TopLink, TopLink Essentials, EclipseLink and TopLink Essentials-GlassFish?
What is the difference of their functions?
Edited by: qkc on Nov 21, 2009 10:52 AM

Difference between TopLink and ToPLink Essentials:
TopLink Essentials are the reference implementation (RI) of JPA, is an open source effort that is licensed under the Common Development and Distribution License (CDDL) v1.0. It can be freely downloaded and used under the terms of this license agreement. This means, you can only use it for the management of persistence and orm with Java EE and Java SE. The binary distribution of TopLink consist of 2 jars:
* toplink-essentials-agent.jar: contains Java Persistence API; XML Schemas and TopLink essentials implementation
* toplink-essentials.jar: contains java agent class requires in a standolane Java SE application
In addition to TopLink Essentials that makes the JPA implementation alive, Oracle offers its Oracle TopLink product (10.1.3) that contains an earlier preview binary of JPA and also offers developers additional object-relational capabilities, object-XML mapping (JAXB), non-relational mapping using Java 2.0 Connector Architecture (JCA).
Let's wait other person to answer these questions.

Setup Exchange2013, with Edge 2010, what are the steps

i want to install exchange 2010 with Edge Role (and typical installation in Exchange2013).
I want that all emails to be received from Edge 2010.
Now, what are the steps after i've finished the default installation:
1. on Exchange2013 create a default send connector to internet through Edge2010 or directo to mx record on internet?
2. On edge2010, will i've to create any default send/receive connector?
3. i've to create edge sync on Edge2010, export it...and import it in Exchange2013, right?
Let me know with full steps, on each of servers.
Regards!
Lasandro Lopez

Hi Lasandro Lopez
Thank you for your question.
Exchange 2010 Edge Transport server expects a connection to a Hub Transport server. In Exchange 2013, the Transport service exists on the Mailbox server. Therefore, Internet mail flow occurs between the Transport service on the Mailbox server and the Edge
Transport server, which effectively bypasses the Exchange 2013 Client Access server.
You can subscribe Exchange 2010 Edge Transport server to an Active Directory site that contains only Exchange 2013 servers. You can import the Edge Subscription file and run EdgeSync on a standalone Exchange 2013 Mailbox server, or on a server where the
Mailbox server and the Client Access server are installed on the same computer. You can't import the Edge Subscription file or run EdgeSync on a standalone Exchange 2013 Client Access server.
The procedures to deploy a new Exchange 2007 or Exchange 2010 Edge Transport server in your Exchange 2013 organization are basically the same as in previous versions of Exchange. However, any procedures that are performed on the Hub Transport server are
performed on the Mailbox server in Exchange 2013.
You can refer to the following link:
http://technet.microsoft.com/en-us/library/jj150569(v=exchg.150).aspx
If there are any questions , please let me know.
Best Regard,
Jim

What are the supported uplink modules in the WS-C3850-48F-L?

Our company has two offices, but the distance between them is a little far. I want to connect the network between the two offices with fiber, But our company is using Cisco Catalyst 3850 Switches , So what are the supported uplink modules
in the WS-C3850-48F-L?

The WS-C3850-48F-L supports the following uplink modules:
4 x 1GE network module C3850-NM-4-1G=
2 x 1/10GE network module C3850-NM-2-10G=
4 x 1/10GE network module C3850-NM-4-10G=
http://www.3anetwork.com/cisco-ws-c3850-48f-l-price_p1839.html

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

What are the pro alternatives to Compressor?

I've been compressing a lot of material recently, mostly shot on DVCPRO HD and edited on FCP. What's been happening is that some - but surprisingly not all dissolves - are breaking up into pixels or rather blocks of pixels. The problem, as I've recently found out, has been documented here so I won't waste anyone's time agonizing over it. I'll just say that using Compression Master, Sorenson Squeeze and bitVice produced artifacts free files right off the bat.
What's infuriating about the Compressor is that every time I try to test a short piece from the middle of the sequence, it compresses fine but then when the whole 20 min sequence is compressed the problem comes back.
I've tried CBR, closed GOP, IP structure etc as suggested in one of the posts and it did get rid of the pixelation but I'm still not happy with the results. The picture looks a bit soft and washed out. Shockingly comparable to a well compressed random, internet downloaded DivX file that I can play on the same player. Is it the Compressor, DVDSP or the true nature of the DVCPRO HD format showing its ugly face?
What are the professional MPEG encoders that could save me all that headache? I'd rather pay good money and finally get it done right than spend my time beta testing software that is clearly not ready for the prime time.

Never had problems whit Apple Mail. Till I updated to Maverick.
First problam was Gmail after updating to Mavericks, Apple mail went to download all my old mail's over 6800. Just delleted my Gmail account form the list to stop it.
Second issuu memory.
First dit not now what was te problem till I found out that Apple Maill took over al my memory. Try differened tip and trick of the Apple Forums. This one works the best. Other users had the same problem after Mavericks.
I restore my Accounts.plist form before the Maverick update.
Looked whit TextWrangler but what am i lookong for? Do not know how is supposed to look.
Size of Accounts.plist on 11/18 1.7MB
Size of Accounts.plist on 23/18 3.0MB
Hoping for the best ....

What are the different values available for type attribute

Hi,
    I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
     Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
Thanks in Advance,
Murthy.

Does this help
tring
    Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
VARCHAR: Varying-length character strings.
CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
DBCLOB: Varying-length strings of double-byte characters in a large object.
|BINARY: A sequence of bytes that is not associated with a |code page.
|VARBINARY: Varying-length binary strings.
BLOB: Varying-length binary strings in a large object.
|XML: Varying-length string that is an internal representation |of XML.
Numeric
    Data that contains digits. Numeric data types are listed below:
SMALLINT: for small integers.
|INTEGER: for large integers.
|BIGINT: for bigger values.
DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
|DECFLOAT: for decimal floating-point numbers.
REAL: for single-precision floating-point numbers.
DOUBLE: for double-precision floating-point numbers.
Datetime
    Data values that represent dates, times, or timestamps. Datetime data types are listed below:
DATE: Dates with a three-part value that represents a year, month, and day.
TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
Regards
Ravi

What are the fiber connectors

Similar Messages

Maybe you are looking for