What are the files for address book named?

my hard drive was failing, and i tried to save as much as I could. I got everything back and loaded on my new drive, but my address book. I have several files with the title address book but none seem to restore my names and addresses..
HELP
thanks
Jack Osterholt

Jack..
If you didn't create an archive, might be out of luck.
File name should be: Address Book - (the date).abbu
To restore: In Address Book, choose Revert to Address Book Backup from the File menu. In the resulting dialog, locate your backup file (it ends with a .abbu extension), select it, and click Open.

Similar Messages

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

What are the steps for merging of database files ?

hi
i have 23 datafiles in a tablespace .i want to merge these 23 datafiles into 4 to 5 datafiles.What are the steps for merging of database files
Edited by: mithun on Oct 22, 2011 11:29 PM

>
i have 23 datafiles in a tablespace .i want to merge these 23 datafiles into no of
small no of datafiles.What are the steps for merging of database filesYou didn't mention your Oracle version.
See here for creating tablespaces http://www.adp-gmbh.ch/ora/sql/create_tablespace.html.
You can specify as many (or as few) datafiles as you like.
Then create tables in your new tablespace x_old_table_name(s) - you can Google this.
Then select the data from old_table_name(s) into x_old_table_name(s).
Drop old_table_name(s)
Rename x_old_table_name(s) old_table_name(s).
There may be a better way.
Paul...

What are the files needed for downloading the MSS -BusinessPackage

Dear Gurus,
Any body can give me a suggestion for downloading the MSS -BusinessPackage ,and also what are the files needed for the deployment -its in a urgent basis and reward points welcome!
regards,
S.Rajeshkumar

Hi Rajesh,
You have to download and deploy the following through SDM (for NW04s/EP7),
1. Business Package for MSS (contains roles,worksets for your Business Package)
2. PCUI_GP (WebDynpro Component)
3. SAP_MSS (WebDynpro Coponent - your MSS application files)
To use ESS and MSS in Conjunction, you also have to deploy Business Package for Common Parts.
Backend SAP systems should have SAP HR and SAP FIN configured.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm</a>
Thanks,
Vamshi

Where are the files for the Backups that show up in About This Mac - Storage?

Where are the files for the Backups that show up in About This Mac - Storage?
My new Macbook Pro 13 retina has 1TB flash drive. But despite my TimeMachine being in a TimeCapsule my Macintosh HD shows 277 Gb of space has Backups. What is this for? How can I delete it?

OS X Lion and newer Mac OS X versions create local snapshots in portable Macs if Time Machine is enabled. See > http://pondini.org/TM/30.html
You don't have to worry about. They are stored in a kind of volume named "MobileBackups", but they appear as stored in your hard drive. To delete them, open System Preferences > Time Machine, and turn off Time Machine. Then, turn it on. However, you don't need to delete them, as they will be deleted when your hard drive gets full

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT

I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?

the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.

What are the announcements for renting VPS?

What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev

What are the wildcards for FILE_MASK in FM EPS_GET_DIRECTORY_LISTING

The wildcard for exactly 1 character is '?'.
example: with mask ????????.STA     , I get the following files:
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
(all files ending with .STA, with 8 characters before .STA)
But what is the wildcard for 'any character' ?
I tried with *.STA     , but the result is
test1
test2
test3
test4
y5c01
(all the filenames with exactly 5 characters)
with *STA, the result is
IBAN
PBCL
rfbi
stxh
stxl
(all the filenames with exactly 4 characters)
(the result is the same with *123 or *XYZ !!!)
with BW*, the result is
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
as expected, but * seems the right wild character for 'any character' only at the end of the mask; it seems not work as expected when it is not the last character of the mask.
It seems very strange! What are the rules for wildcards ? (I'm in 4.7)
thanks in advance

CONSTANTS DAYS1980     TYPE I VALUE 3652.
DATA: linelength TYPE i VALUE 0.
DATA: linelength1 TYPE i VALUE 0.
DATA: text TYPE string.
DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
      DPATH    LIKE EPSF-EPSDIRNAM,
      PFILE    LIKE EPSF-EPSFILNAM,
      MDATE    LIKE SY-DATUM,
      MTIME    LIKE SY-UZEIT,
      POINT_IN_TIME TYPE I.
DATA: BEGIN OF FATTR OCCURS 0,
          FILE_NAME LIKE EPSF-EPSFILNAM,
          FILE_SIZE LIKE EPSF-EPSFILSIZ,
          FILE_OWNER LIKE EPSF-EPSFILOWN,
          FILE_MODE LIKE EPSF-EPSFILMOD,
          FILE_TYPE LIKE EPSF-EPSFILTYP,
          FILE_MTIME(12),
      END OF FATTR.
PARAMETER P_PATH(50) TYPE C DEFAULT '/TMP' LOWER CASE.
PARAMETER P_FILE(50) TYPE C DEFAULT ' ' LOWER CASE.
DPATH = P_PATH.
PFILE = P_FILE.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
     EXPORTING
          DIR_NAME               = DPATH
*          FILE_MASK              = PFILE
     TABLES
          DIR_LIST               = DLIST
     EXCEPTIONS
          INVALID_EPS_SUBDIR     = 1
          SAPGPARAM_FAILED       = 2
          BUILD_DIRECTORY_FAILED = 3
          NO_AUTHORIZATION       = 4
          READ_DIRECTORY_FAILED = 5
          TOO_MANY_READ_ERRORS   = 6
          EMPTY_DIRECTORY_LIST   = 7
          OTHERS                 = 8.
break developer.
IF SY-SUBRC EQ 0.
LOOP AT DLIST.
linelength = STRLEN( DLIST-NAME ).
    linelength = linelength - 3.
linelength1 = STRLEN( P_FILE ).
    linelength1 = linelength1 - 3.
if DLIST-NAME+linelength(3) = P_FILE+linelength1(3).
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              FILE_NAME              = DLIST-NAME
              DIR_NAME               = DPATH
         IMPORTING
              FILE_SIZE              = FATTR-FILE_SIZE
              FILE_OWNER             = FATTR-FILE_OWNER
              FILE_MODE              = FATTR-FILE_MODE
              FILE_TYPE              = FATTR-FILE_TYPE
              FILE_MTIME             = FATTR-FILE_MTIME
         EXCEPTIONS
              READ_DIRECTORY_FAILED = 1
              READ_ATTRIBUTES_FAILED = 2
              OTHERS                 = 3.
    IF SY-SUBRC EQ 0.
      FATTR-FILE_NAME = DLIST-NAME.
      APPEND FATTR.
    ENDIF.
    endif.
ENDLOOP.
SORT FATTR BY FILE_NAME.
LOOP AT FATTR.
    POINT_IN_TIME = FATTR-FILE_MTIME.
    CALL FUNCTION 'POINT_IN_TIME_CONVERT'
         EXPORTING
              POINT_IN_TIME = POINT_IN_TIME
         IMPORTING
              DATE          = MDATE
              TIME          = MTIME
         EXCEPTIONS
              OTHERS        = 1.
    SUBTRACT DAYS1980 FROM MDATE.
    WRITE: / FATTR-FILE_NAME,
             FATTR-FILE_SIZE,
             MDATE,
             MTIME.
ENDLOOP.
ENDIF.
Edited by: kk.adhvaryu on Sep 25, 2010 12:08 PM

What are these files for ACCFinderBundleLoader_64 and ACCFinderBundleLoader_32? They appear in my Launchpad!

What are these files for ACCFinderBundleLoader_64 and ACCFinderBundleLoader_32? They appear in my Launchpad!
I am thinking to delete them because they disturb me when they have a place in the Launchpad among my applications.

My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac

My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac and any suggestions?

In the AirPort Utility, I selected the Advanced tab, and then selected Port Mapping.
Q: What service do I choose from the drop-down menu? Also, where do I enter the two ports you mentioned? Public UDP Port(s)? Public TCP Port(s)? Private IP Address: Private UDPPort Private TCP Port?
still confused, I guess. Thanks!

What are the Prerequisites for MDM

HI,
I would like to know what are the prerequisites for SAP MDM

Hi,
for MDM 5.5 installation, requirements are:
MDM 5.5 Server:
--> Microsoft windows 2000/ 2003/xp
--> Linux -- kernel version 2.4 or higher with the following
libstdc ++.so.5 or higher
glibc 2.2 or higher
 sun Solaris - 8 - sunos 5.8 rev .02/02 or later
DBMS:
--> Microsoft SQL server 2000 ( version 8.0 sp3)
--> Oracle 9.2
--> IBM DB2 8.1 version
MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
MDM 5.5 API's:
--> COM
--> JAVA
Desktop Publishing:
--> Quark Express (windows and Macintosh)
--> Adobe In Design (windows and Macintosh)
Installation: MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
1.First we have to maintain Database server.(Sql 2000, Oracle 9i)
2. We have to install MDM Server.
3. After that install GUI clients.
3.1. Console
3.2.Importmanager
3.3.Datamanger
3.4.Syndicator
4. Import manager Batch server, Syndication Batch server.
5. Next coming to repositories go to Business content folder And select repositories .
6.Program files --> sap MDM 5.5 --> Server > Archives> Put the repositories.
7. In Console Mount the MDM server.
8. Unachieve the repositories based upon Requirement
Regarding this Any issues please let me know.I will clarify ur doubts.
For MDM Learning
https://www.sdn.sap.com/irj/sdn/mdm-elearning
Please go through this link
Regards
Hari

What are the files for address book named?

Similar Messages

Maybe you are looking for