What are the files in the NI-RT/Start-up directory?

I have what I believe should be two (2) identically configured PXI chassises with PXI8145 controllers. However, the one chassis never allows me to download my application and the other one downloads and runs fine. The only difference that I can see is that within the NI-RT/start-up directory there are four (4) files and a directory that exist on the system that works and these files do not exist on the system that does not work. What are these files and can I just copy them from the other platform via ftp?

I'll answer my own question in case this helps anyone else... The files according to NI tech support are junk. However more importantly the reason I wasn't able to download the application was due to lack of RAM on the 8145RT. This was caused by several drivers being loaded by the RT machine at bootup that I didn't need to have loaded. These drivers are listed in the file NI-RT.ini in the Startup directory. The line StartupDLLs= should only contain the drivers that you need. Delete all of the other entries. Hope this helps someone. -Tom

Similar Messages

What are .heu files in the flash player cache folder for?

what are .heu files in the flash player cache folder for?

On Friday 07 Nov 2008, alex_stewart wrote:
> What could be the issue that server 2 is not able to write .swz files
> I have the .swz MIME types on both the servers
If the files are already there, they'll never be overwritten when you visit a
new site, would they ? That's how the cache works :-)
Tom Chiverton
Helping to simultaneously benchmark sticky fourth-generation CEOs
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the registered office. Any reference to a partner in relation to Halliwells LLP means a member of Halliwells LLP. Regulated by The Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit www.halliwells.com.

I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space. What does this mean?

I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space." What does this mean?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

Where are the files for the Backups that show up in About This Mac - Storage?

Where are the files for the Backups that show up in About This Mac - Storage?
My new Macbook Pro 13 retina has 1TB flash drive. But despite my TimeMachine being in a TimeCapsule my Macintosh HD shows 277 Gb of space has Backups. What is this for? How can I delete it?

OS X Lion and newer Mac OS X versions create local snapshots in portable Macs if Time Machine is enabled. See > http://pondini.org/TM/30.html
You don't have to worry about. They are stored in a kind of volume named "MobileBackups", but they appear as stored in your hard drive. To delete them, open System Preferences > Time Machine, and turn off Time Machine. Then, turn it on. However, you don't need to delete them, as they will be deleted when your hard drive gets full

I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid". What does this mean and how do I correct it ?

I just burned to disc an album of photos I created in Pages but I cannot open the file on the disc because "the format is not valid". What does this mean and how do I correct it ?

There are numerous thread about the same matter in this forum
I hope you'll find your answer
https://discussions.apple.com/search.jspa?resultTypes=&dateRange=all&peopleEnabl ed=true&q=the+format+is+not+valid&containerType=14&container=2084&username=&rank By=relevance&numResults=15

TS1363 When I sync my ipod all goes well until I try to eject then it says that other systems are using files on the ipod. Nothing else is running and when I physically eject the ipod hasnt synched....ideas anyone?!

When I sync my ipod all goes well until I try to eject then it says that other systems are using files on the ipod.
Nothing else is running.
The only way I can eject is to do so manually, when I do I then find the ipod hasnt synched.
Any ideas?

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything.

While using a drop-down menu i.e. File, edit, image, or even when saving as and choosing the file type; the list appears and I am able to highlight what i want but cannot click on anything. This is becoming incredibly frustrating. It happens at random time and a restart of the computer is all that helps, then with out any notice it starts to do this again. Mac Book Pro i7 2.2 16 GB 1333 Ram, (2) 450GB SSD both internal to machine. At this point I am losing file because I am unable to save in the file type I need. Does anyone out there know how to solve this issue?
Thanks
phil

I haven't been unify photoshop much in the past month, but I did try your suggestion and it seemed to work for a while. Today when i went to save a document the same thing happened: click on file>save at this point I can not click on save even though it is highlighted. Tryed to use command s that brings up the save dialogue box, but when I try to change file type I again cannot select it from the drop down menu.

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

HT201596 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive. ALL my files are on the 4TB. How do i get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .

Hi, 80 % of my itunes files are located on a 3tb external drives; the remainder on a 4TB drive as I ran pout of space. ALL my files are on copied on to the 4TB drive . How do I get iTunes just to use the files on the 4tb drive so I can use the 3tb for other purposes THX .

Select the desired location in preferences, then consolidate the media files to it.
iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507 - Unfortunately this is misnamed. It should say "Change where your media files but not where your library files are stored" - more information at: https://discussions.apple.com/message/22026652#22026652 - and steps 5-8 in https://discussions.apple.com/message/24491967#24491967

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Where can I find the file where the static mapping allocations of the DHCP server are stored?

In our company we are using DHCP to assign static ip addresses to our clients.
Now we are forced to change the ip address range. To prevent changing each allocation
of mac-address to ip-address manually with the admin tool i would like to change the allocation
in the file where the allocations are saved. The reason ist that i just have to use copy & paste for all
the allocations.
So how is the file named and where can I find the file where
the static mapping allocations of the DHCP server are stored? Is it just an ASCII file?
Must i note anything when i change the file manually?

From man bootpd:
BOOTP/DHCP STATIC BINDINGS
     Static IP address to ethernet address bindings are stored in the /etc/bootptab file and in Open Directory. Bindings specified in the /etc/bootptab file take precedence over those in Open Directory.
     See bootptab(5) for more information about the /etc/bootptab file.
     For Open Directory, bootpd looks at the /Computers records for the following properties:
/etc/bootptab is a standard text file, while the records in Open Directory can be manipulated either through the command line, or via Workgroup Manager.

The songs I bought are not in the file of the songs I bought.

I bought more or less 80 songs but now in the file where are the songs I bought there are only 18 songs (the latest I bought) and the songs I bought before these I can't download them. The first problem I had was that there were all the songs in the iTunes that I bought but there were twice, so I deleted one of the both, and now these songs I deleted are not in the file of the songs I bought. How can I repair that? I'm really nervous.

Sign out of the iTunes Store, Sign in again. You should be able to download your past purchases from iTunes Store > Purchased > Music > Not on this computer. Alternatively look in the recycle bin for the files that have been deleted, then drag & drop these into ..\iTunes\iTunes Media\Automatically Add to iTunes.
tt2

What are the files in the NI-RT/Start-up directory?

Similar Messages

Maybe you are looking for