What are the front end tools & components needed to use Visual composer.

Hi all,
please help for the following queries.
1.What are the front end tools & components needed to use Visual composer.
2. Is it possible to view in internet explorer web reports/ Dash boards created in Visual composer.
3. How to create Webreports & Dash Boards in Visual composer.
It's Urgent waiting for responses.
Thanks & Regards,
Basava Raju

Hi James,
For Visual Composer no need any Front end tools.. you need portal connection.. to configure your visual compoer.. the visla composer it self contain all the items.. just like a Webtemplate..
all the reports.. that web based reports or dash boards we can view through Browser only..
for creating reports in visal composer.. just go thru this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
/people/marcel.salein/blog/2007/02/02/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86ehttps://www.sdn.sap.com/irj/sdn/visualcomposer
regards
@jay

Similar Messages

What are the Oracle development tools

Hiii,
I hav just started learning about oracle...i have been given my very first task and it is about exploring oracle development tools.
I have been searching about it since two days...i just need some guidance that what are the oracle development tools...and what should i write about it..
plzzzzz help me in solving this..
regards
Edited by: user10446043 on Oct 22, 2008 11:26 PM

<ul>
<li>The ADFLearning Center has our latest resources for enterprise 4GL Developers getting started with Oracle ADF. This includes the complete ADF Developer's Guide for Forms/4GL Developers, a companion sample application, and a companion step-by-step tutorial.
</li>
<li>     To complement the free Developer's Guide from Oracle, you might be interested in the Oracle Press title Oracle JDeveloper 10g for Forms & PL/SQL Developers: A Guide to Web Development with Oracle ADF.
</li>
<li>My bimonthly DEVELOPER: Frameworks Oracle Magazine column articles.
</li>
<li>There is an instructor-led course for Oracle ADF For Forms/4GL Developers.
</li>
<li>     Potentially of interest to any former Oracle Forms or Oracle Designer user is the additional Oracle JHeadstart for ADFextension for JDeveloper. This is a complete web-tier page generation solution that has its own step-by-step tutorial so customers can evaluate whether it might benefit their developer productivity. The JHeadstart Features/Benefits document is here (pdf).
</li>
<li>     The OTN J2EE for Forms Devs home page has additional resources of particular interest to Oracle Forms developers.
</li>
</ul>
Hope this helps

What are the third party tools available for Encryption in Oracle database?

Dear All,
Can you please help me with the below question?
What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
1. Operating system
2. Database edition and version
3. What type of data needs to be secured
4. What level of security is required

What are the softwares or tools present default in TFS 2010

Hi,
1.What are the softwares or tools present default in TFS 2010?Whether SCVMM is present by default
2.What is the cost of upgrading to TFS 2012 from TFS 2010(VS ultimate version)?
3.In Team Foundation Administration Console,what is the purpose of Lab Management,Build Configuration(Build
Controller),Test Controller.Please guide me.
4.How to create template for automation?What is the need of template creation.
5.Whether I need to install build Controller & Test Controller for the lab Center to work in MTM.

Hi Nazimanasir,
For your questions, check the replies in below items:
1. Tfs is a dependent software, but have prerequisites for installation. And you may check MSDN pages to see the requirements like:
https://msdn.microsoft.com/en-us/library/dd578592(v=vs.100).aspx
If you want to know TFS architecture, you can refer to the
page for more information. And you can get started TFS 2010 from this
page. You have to install SCVMM if you want to use it to manage virtual machines
2. For the license issue, you might contact
http://www.microsoft.com/licensing/contact-us.aspx
directly for the better response, where specialized experts live in. You can also refer to the upgrade guide here:
http://vsarupgradeguide.codeplex.com/
3. With the Lab management, you can build and test in lab environment. Refer to this
page for more information about lab management. The build controller is for TFS build, and test controller is for testing which can be used to run test cases by MTM.
4. I'm not quite clear the template you mean, please elaborate more details. If you're saying build process template, then you can use the build process templates that accompany with the team project. If you mean process template, you can check them in process
template manager. You can also check this
page for more information about customize TFS process template.
5. Once you have setup your TFS machine, then you can configure build controller by following the instruction in this page:
https://msdn.microsoft.com/en-us/library/ee330987.aspx And check this
link for setting up test controller. For MTM related questions, you can also open a new thread in MTM forum for a better response.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the standard Application tool bars used in reports

Hi All,
What are the standard application tool bars used in the report/program?
Thanks in advance
Regards
Chakri

Hi,
Goto SE41,
Programs : SAPLKKBL
Status : STANDARD
Thanks,
Best regards,
Prashant

What are the video/movie formats that iBooks Author uses?

What are the video/movie formats that iBooks Author uses?

strange... when I click on it it goes to the correct page:
http://support.apple.com/kb/HT5065
http://support.apple.com/kb/HT5065

What are the extra software pieces I need to connect a Flir A325 camera via GigE?

I am going to be developing an application which includes 2 Flit A325 cameras (GigE). The plan is to have one computer connected to the cameras with that camera computer sending messages via datasocket to the stand computer, which will have other DAQ connected to it.
What are the extra software pieces (besides regular LabVIEW) I will need on the camera computer? IMAQdx? Vision Module or toolkit? I don't need automated inspection stuff.
Thanks,
John

Hello John,
If you only need to acquire images from these cameras, you would just need the Vision Acquisition Software. This will provide you the NI-IMAQdx driver to take care of image acquisition from GigE cameras. If you need to do any image processing as well, such as thresholding or pattern matching, you would need the Vision Development Module.
To send images over DataSocket, you can flatten the image to a string for it to be sent to the second computer, and then unflatten it on the other end. The following knowledgebase article has information on this: http://digital.ni.com/public.nsf/allkb/70A5D11517DBA50C86256E6A0070E5A7?OpenDocument . I hope this helps!
Vivek Nath
National Instruments
Applications Engineer
Machine Vision

Has anyone developed a site for podcast in Muse? If so what are the pro's and con's vs. using Wordpress?

have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site. I use BC for my sites. Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
Router-mode is easier to understand and troubleshoot.
The CSM is just like a router with vlans and routing between each of these.
It requires a minimum of configuration.
However, it is important to design correctly.
For example I would recommend not to have client accessing the CSM directly.
They should go through the MSFC first.
Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
You never know which is active.
The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
This is a good solution.
Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
A little more complex to troubleshoot as well.
Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
Regards,
Gilles

What are the mapfiles for and when should I use them?

Hi,
what are the map files for and why/when should I use them?
/usr/lib/ld/map.noexstk
usr/lib/ld/map.noexbss
/usr/lib/ld/map.noexdata
/usr/lib/ld/map.pagealign

Hi, I'm sure you've read the comments, but for the benefit of those who haven't: /usr/lib/ld/map.noexstk # Linker mapfile to create a non-executable stack definition within an # executable. /usr/lib/ld/map.noexbss # Link-editor mapfile to create a non-executable bss segment definition # within an executable. /usr/lib/ld/map.noexdata # Link-editor mapfile to create a non-executable data segment definition # within an executable. These stop the various segments from being executable. Which could reduce the risk surface for exploiting security holes in an application. /usr/lib/ld/map.pagealign # Linker mapfile to create page-aligned data within an executable. Aligning the start of the data segment can reduce the number of TLB entries needed to map the data. So the smallest TLB page size is 8KB, then we have 64KB, then 4MB etc. If the data starts on a 4MB boundary then it can be mapped with 4MB pages, if not then it has to be mapped with 8KB pages until a 64KB boundary, then 64KB pages until we get to a 4MB boundary. You sometimes get a bit of performance from this, but you may also get performance stability from it. If the mapping is random sometimes it works well, sometimes it works less well. Regards, Darryl.

What are the logical database source (SQVI) should i use for quick viewer

Dear expert,
Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Please help.
Many Thanks.
Regards,
Karen

Hi,
Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
Between,do you have any reference/link/document on the how to use the SQV1?
Also, what the difference between SQV1 and SQ01 ?
And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer to generate the query?
Please help.
Many thanks.
KH

What are the essential cases where we must have use update module F.M.

Dear sap Friends ,
I want to update or insert bill no. in a ztable when creating bill through VF01 .
I have done it through insert sql query as well as by update module enabled functin module .
what are the essential cases where we must have to use update module enabled functin module and why we use IN UPDATE TASK .
mainly i want to know in which case i must have to use update module enabled functin module and not by insert or modify query used smply .
Thanks ,
Amit Ranjan .

Hi Amit,
I sincerly advice you to search SCN or any anywherelse as big theory is behind this
few related info.
If you are using more than one screen to collect the data to update a perticular table and corresponding underlying table Child table in that case , after every screen change an implicit data base commit takes place and you are still collecting the data from other screens , in such cases you use IN UPDATE TASK
Please go through SAP LUW
Regards
Ramchander Rao.K

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

What are the ideal specs for professional graphic designer using CS5 illustrator, photoshop and indesign?g

What are the ideal Mac Pro specs for a professional graphic designer using CS5 Premium- using mostly InDesign, Illustrator and PhotoShop?

24GB RAM
SSD for boot drive
GHz, but not necessarily dual. Apple doesn't sell dual 3.33s.
A single 3.33 6-core should do fine and "sweet spot" (when looking, there is "4-core" build to order..,. and like everything else on the Store, why in heavens they didn't be more accurate and clear and say "single socket" and then have "dual processor configurations" 0 I guess the writers don't understand or know workstations or jargon? I say that 'cause some have trouble even finding the 6-core 3.33 choice ($1200 over stock 2.8 4-core).
W3680 though can be found on Buy.com for $620 (was $589 at earlier date) and people are known to then sell the stock cpu $300 making it even more attractive and save $600-900 that way rather easily. Or not.
But yes, I would send you to MPG.com site as well and read through what is on there.

What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

I can not remotely access my Windows Home Server from outside. What are the correct settings for my WRT54GS?

I have opened ports 80, 443,and 4125 to PCP. The router address is http://192.168.1.1, my address is 221.40.138.170.
Thank you.

What are the year end and month end activities carried in FI?

Hi all,
I am new to FI, what is the steps or the activites/process to be carried out during the month end as well as the year end activities for FI.
Can anyone explain me about it and does sap provide any standard documentation on year end / month end activities.
Thanks
Pooja

Hi Pooja,
Please find the details below
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation (T. Code: FF67)
3. Make sure that Sum of Inter Company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system. (T.Code:F-22 & F-43) 6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over (T.Code:OB52) Year end
Closing Activities:
1. Calculate production work in progress on process orders which are not technically complete. (CO88).
2. Carry out Assessment cycle for Cost Centers (T. Code: KSUB)
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year With TC: F.16 we can carry forward the balance to next year. With TC: OBH2 copy the number ranges to next year Open next year periods by selecting the Posting Period Variant. then test by posting the transaction in F-02)
SAP FI Month End and Year End Activities
1 - Maintain Activity prices - KP26
2 - Release of Standard Cost Estimate - CK40N
3 - MM period close and open - MMPV
4 - FI period open
5 - Parked documents to be posted - FBV0, MIRO
6 - Reposting of Inter Office CC - KB61
7 - Bank Reconciliation
8 - Update Section Code where missing - J1INPP
9 - Maintain GRIR clearing - F.13
10 - Provision for current month - FB50
11 - Depreciation entry - FB50
12 - Exchange rate - To be Updated
13 - Revaluation of foreign currency open items - F.05
14 - Recognition of Inventory at Bonded warehouse - FB50
15 - Maintain Statistical Key Figures - KB31N/KP46
16 - Variance Calculation of Process Orders - KKS1
17 - Settlement of variances - CO88
18 - Assessment cycles - Aux/WH CC to Main CC - KSU5
19 - Assessment cycles - Functional CC to SBU CC - KSU5
20 - Assessment cycles - SBU CC to COPA - KEU5
21 - Profit Center Reposting - 9KE0
22 - Balance Sheet Adjustment calculation - F.5D
23 - Transfer Profit Center to AR & AP - 1KEK
24 - Transfer Inventory to PCA - 1KEH
25 - Assessment Cycle - Dummy PC to SBU PC - 3KE5
26 - Check for u201CDelivery made, not Invoicedu201D - VF03
27 - Match GL and PCA - KE5T
28 - Match PCA and PA
29 - Top Down Distribution in COPA - KE28
30 - Reclassification of GL balances
31 - Balance Carry forward (Year End Only) - F.16
32 - PCA Balance Carry forward (Year End Only) - 2KES
33 - Transfer to FI - 1KE8
Regards,
JA

What are the front end tools & components needed to use Visual composer.

Similar Messages

Maybe you are looking for