What are the general errors will come in data uploading
Hi Friends,
What are the general errors will come in data uploading
Thanks in Advance
Paul
It all depends on how we configure the system. Errors may be different for different scenerios like
User ALEROMOTE Loacked for master data's
Data Sourcs has to be replicated
Activation Failures
Error occures in data Selection Etc.
Do you have any specific error so that we can work on that.
Thanks
Sat
Similar Messages
-
What are the possible errors that can happen in data loads(rsmo monitor)?
hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
poojaHi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK -
What are the common errors we get in supporting project
can any body reply what are the common errors we get in supporting project
for abapers tickets will get or not.
what type of tickets generally get regarding reports.<b>SAP Tickets</b> are nothing but problems or issues raised by the end
customer in a company where end users are running SAP project.
Once the SAP project is implemented, support phase begins. Support
team is responsible for solving the tickets/issues in day-to-day
business.
For any support project, customer will set up Help Desk. If any
problem occurs customer will call Help Desk and register the
issue/Ticket.
Different companies use different software products to manage SAP
Tickets. Remember this software is not provided by SAP. It is third
party software. There are many software products in the market like
Manage Now et c. You can call these software products as tools.
All tools will provide the common attributes which are listed below-
1) Every user will be provided with user name and password to enter
into the tool
2) We can see the tickets assigned for a particular user name.
3) You can list all open tickets by giving the Date Range
4) You can list all closed tickets by giving the Date Range
5) You can list out all the open tickets assigned for an User
6) You can list out all the closed tickets assigned for an User
7) You can see the description of the Ticket, by entering the Ticket
Number. You can see who had raised the Ticket, what is the problem.
What is the severity of the Ticket?
There are lot many other attributes like you can transfer the Ticket
to another user etc.
<b>What is the severity of the problem Ticket?</b>
When a Ticket is raised, it will be given severity. There are
following severities. It may vary from company to company.
Severity 1
Severity 2
Severity 3
Severity 4
The severity will be decided based on the business critical impacts.
If there is large impact on the business it
will be given 1 severity, if it is having least impact then it will be given 4.
Severity 1 problem tickets should be solved in 8 hours.
Severity 2 problem ticket should be solved in 16 hours.
Severity 3 problem ticket should be solved in 15 working days.
Severity 4 problem ticket should be solved in 30 working days.
Again the no of days may vary from one company to another.
All these things will be decided when giving the contract to the IT
company. The agreement is called as "SLA".
SLA stands for Service Level Agreement.
What happens if a particular ticket is not solved by the IT company
according to the SLA/Contract?
The Customer imposes fine on IT company as per the contract/SLA.
<b>Errors in Extraction</b>
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any
infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light
error message:
Master data/text of characteristic ZCUSTSAL already deleted
1)extraction job aborted in r3
2) request couldnt be activated because theres another request in the
psa with a smaller sid
3) repeat of last delta not possible
4) datasource not replicated
5) datasource/transfer structure not active
<b>Issues faced during the implementation :</b>
1. Slippage of milestones
2. Incorrect or wrong design
3. Reporting format problems
4. Data not matching or reconciling problems
5. Issues discovered during testing leading to redesign
6. Performance issues
7. Requirements misinterpretation
9)check the data same in source system and target system ( i mean
suppose u are extarcting from r/3 after loading check ur data r/3 and
bw same or not.
10)that is abap code, i didnt understand ur question properly.
11)
12) generic extarction, if ur businees contect satisfy ur requirement
u go for generic, suppose u need data from different tables go generic
with view with 1:1 relation 1:M relation for function module.
13)v3 update back groud job is in lo
14)its superior info object, u can find this in master data tab .
15)
16)tuning we will go for improve query performance (compression,
aggregates, partation, index, rollup, precalculated web tneplates.)
17) rsa7(check with some one)
18)bw statics for find data base time and olap time and frontend
time(based on u can improve query performance create like aggra comp ,
indices etc..)
19) direct chain only one chain , meta chain if u have more than one chains
load errors u can solve manually, other than load errors u can wait
right click and repeat.
20)
21) u cn cteate other cube and traansfer, but data space waste.(bec
structures will be deffi)
22) u mean data source enhancement.or not(let me know)
23)rsap0001( for customer exit variables) 001 for transaction data 001
attributes, 003 text 004 hierchies.
24)web application design , its like same bex, but report will execute
in browser.
25)
26) arrangement of process are called process type and we can use
varient and start process for back ground jobs.
<b>Don't forget to asign points</b>
regards
ravish -
What are the common error while EBS installation in Unix /windows
what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regardsHi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios -
What are the common errors in reporting and extraction.
hi friends,
what are the common errors in reporting and extraction for implementation and support projects.
thanking u
suneel.Hi Suneel,
Errors in reporting are like incorrect query creation, errors in creating RKF, CKF and variables, misunderstanding the data, or errors with other tools like broadcasting. Errors in extraction relate to source system connectivity, field-infoobject mapping, incorrect code etc. Also, please search the forums and you will find many real time examples.
Hope this helps... -
We are upgrading EHP4,What are the scenarios we will check in ECC and APO
Hi gurus,
We are upgrading (ECC )EHP4
What are the scenarios we will check in ECC and APO, kindly tell me gurus.
Regards
babuBabu,
We live within a dream. The आत्मन् is real, all else is Illusion. Names are illusion. If DB49 does not suit you, then call me nameless.
Before you even release the software into the test environment, you must perform unit testing. Can every transaction that is used by your company be executed? Does every userexit/enhancement still perform the same task? Does every custom report work the same? All interfaces passing the proper data?
Merely testing the software itself will not give your company any assurance that it will support your business after you go live with it, so after unit testing comes integration testing and user acceptance testing. You must interview Key business users, and from their input you must develop and execute tests for 'business processes'. For example, one common business scenario (which contains many business processes), Order to Cash: Check whether your upgraded systems supports your ability to receive and enter an order, plan the parts, obtain the RM, build the parts ship the order, and book the cash. Or, another Scenario, Procure to Pay: Check if you can plan RM parts, create/release PR, create PO, send PO to Vendor, receive PO in stock, pay invoice, close month for accounting purposes.
These are two major business scenarios in most companies that use ERP. There are hundreds more that can be tested, If you work for a company that cannot afford to have any disruption in their business, then all activities that are normally done by any business user should be tested.
On the SCM side, during an ERP update, you have a smaller task (SAP usually does a good job with backward compatibility with their own modules). BW extractors must be tested. All integration models must be tested. All userexits must be tested. Publishing results/releasing results to ERP must be tested. The list goes on and on depending upon which SCM modules you have implemented.
Regards,
DB49 -
i want my iPhone to be replaced it is in warranty what are the things required will giving it to service centre
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
-
What are the installed fonts that come with Premiere Elements 13
Anyone Please
What are the installed fonts that come with Premiere Elements 13
and If I download the trial and then convert with a purchased, does the trial have all the fonts and themes and add-ons, more that the disk version.
I have a new Mac, and it does not have a DVD drive, but I can get one need be.
ThanksBabieMe
The Premiere Elements tryout should have all the features of the program. But, remember that Premiere Elements Mac does not necessarily have all the features
of Premiere Elements Windows.
Premiere Elements Windows uses Windows fonts.
Since I am strictly an Elements Windows user, I am not sure of the details of Mac fonts. Not sure if the following will help.
Mac OS X: Font locations and their purposes - Apple Support
Fonts on Macintosh - Wikipedia, the free encyclopedia
Based on the Windows model, I would suspect that Premiere Elements Mac will use the Mac fonts of the Mac system.
ATR -
What are the common errors we wil get in BDC?
what are the common errors we wil get in BDC?
hi sunil
BDC errors are similar to what you get in online transaction. Suppose you enter an invalid material number in online ME21N ( create Po ) system will throw an error and you have to correct it by chnaging a valid material number . Same error you can get in BDC as well. It is very difficult to generalize types of error as errors will depend on the transacation you are doing.
However some of the common BDC errors are ( Data for Screen Not Found, Field Not available in Screen ). These again are transaction specific and you have to analyze it by calling the transacion in display ALL mode.
The errors you get depends upon the transaction you are
running.
This is how you handle:
Let's consider you are recording for the transction CJ40
(Messages table declaration )
DATA :BEGIN of t_msg occurs 0.
include structure BDCMSGCOLL.
DATA END of t_msg.
Handling it :
CALL TRANSACTION 'CJ40' using T_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO t_msg.
commit work.
If you want to display the errors in the screen you can use a function module named 'RPY_MESSAGE_COMPOSE'
This gives you the corresponding message for the message number that you input.
Below is the sample code
Loop at t_msg. " Messages internal table
w_msgid = t_msg-msgid.
w_msgno = t_msg-msgnr.
w_msgv1 = t_msg-msgv1.
w_msgv2 = t_msg-msgv2.
w_msgv3 = t_msg-msgv3.
w_msgv4 = t_msg-msgv4.
CALL FUNCTION 'RPY_MESSAGE_COMPOSE'
EXPORTING
LANGUAGE = SY-LANGU
MESSAGE_ID = w_msgid
MESSAGE_NUMBER = w_msgno
MESSAGE_VAR1 = w_msgv1
MESSAGE_VAR2 = w_msgv2
MESSAGE_VAR3 = w_msgv3
MESSAGE_VAR4 = w_msgv4
IMPORTING
MESSAGE_TEXT = t_text-text.
TABLES
LONGTEXT =
EXCEPTIONS
MESSAGE_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MESSAGE_TEXT contains the message.
Please reward points if this explanation useful.
Regards,
navjot
reward points -
What are the simple to use COM library in your java code
Hi,
what are the simple to use COM library in your java codePhHein wrote:
[javax/comm|http://java.sun.com/products/javacomm/reference/api/javax/comm/package-summary.html]
No, he wants to use Windows COM objects!
@OP
It's not easy. You can try j-integra or ezjcom, which I tried years ago and was not too happy, but maybe
they improved or they are just fine for your needs. $$$ involved!
If you want to do it by yourself, it won't be easy at all, I promise, but it can be done with JNI or JNA.
If your interactions are very few and simple, maybe some workarounds could be found. -
What are the accounts that will hit while doing subcontracting process
What are the accounts that will hit while doing subcontracting process?
Hi Raj,
In Case of Sub contract
While doing Transfer Posting (Providing material to vendor) in MB1B or ME2O only Material document will be generated. No Accounting Document will be generated.
While Receiving the Finished / Semifinished material both Material and Accounting documents will get generated and the accounting entries will be as under
1. Stock Account (finished Account) BSX - Debits
2. GR/IR clearing Account WRX - Credits
3. Change in Stock Account BSV - Credits
4. Processing Charges/Sub Contract Charges FRL - Debits
5. Stock Account (Raw Material) BSX - Credits
6. consumption from stock of material provided to vendor GBB(VBO) - Debits
bye
Sridhar Thota -
What are the general properties that must be in target machine for clone ?
What are the general properties that must be in target machine for clone ?
like must intall EBS frist.
must have same users name
must run in the same linex .
etc..Hi Micel,
Thanks for the OS version Update
Micel 811 wrote:
sourse :Red Hat Enterprise Linux Server release 5.3
Target :Red Hat Enterprise Linux Server release 6.0 (Santiago)
is there problem with this differences ?Yes
whats your EBS version?
assuming you are on R12
You need to upgrade the database to 11.2.0.3 and Oracle Application Server 10gR3 to 10.1.3.5 -- See the following docs for details.
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
and can i take clone for tow nodes and put in one node ?Yes
Already answered in my last post
FAQ: Cloning Oracle Applications Release 11i [ID 216664.1]
have you refered the doc above ?
and As I understand I do not need to new fresh EBS setup for target node.Yes No need ;)
Beauty of Rapid clone :P
;) Appsmasti ;)
Sharing is Caring -
What are the parts i will need for my ipod since my ipod screen remains completly blank white
what are the parts i will need for my ipod since my ipod screen remains completly blank white
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What are the uses of diffrent concepts in data warehousing
What are the uses of diffrent concepts in data warehousing? Why?
naveenHi,
Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
To read more visit,
http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
Regards
Srinivasan T -
What are the steps to restore all deleted data and settings by remote wipe? Thanks.
What are the steps to restore all deleted data and settings by Remote wipe?
Go to me.com, logon and go to the FindMyiPhone. If it does not appear then there is not much you can do.
Next step would be to appleid.apple.com and change your password to cut off access to your iDisk.
Maybe you are looking for
-
Moving a document library to the top level subsite
Hi community As part of period of extensive user engagement, I want to move the development documents library to the main community site I have set up for the project board ( rather than project office site where it is now). Now I don't do this ver
-
The message that reaches the file receiver channel is <EDI_DC40> structure1 </EDI_DC40> <EK1NA1M> structure 2 </EK1NA1M> So i wanna write a module configuration which will rename the first tag as <ek1na1m>. Pl
-
Bursting with Report's input parameters
Hi experts, I am running BIP bursting feature, and this is working fine. Now, my customer is needing to enabling bursting feature by passing report´s input parameters. It is possible to set the bursting sql query to accept report´s input parameters?.
-
Creative cloud only shows spinning blue wheel
Hi, I have the spinning blue wheel issue on Windows 8.1 64 bit. I have tried all the options in this article: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html I even uninstalled all Adobe CC apps and tried from scratch bu
-
Healing Brush not working in CS4.
Hello, The Healing Brush in my copy of CS4 has always been a problematic tool. Some times it worked and sometimes it didn't. Now it never works. Can anyone please help me to get it working properly? Thanks for your consideration, cobaltgreen