What are the gestures for switching tabs in safari

Subject says it: are there gestures for switching tabs in Safari under Lion? (I'm using a MacBook Air.)
Thanks.

djdannyjacko wrote:
bring your pointing and index finger together to swipe tabs
Kind of cool, but I think I'd like to just be able to move them with one gesture.

Similar Messages

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

What are the rules about switching versions?

I thought projects created in iMovie 9 showed up in iMovie 10, but I just tried creating a new project in iMovie 9 this morning and it is not showing up in iMovie 10, even though I see projects from 2013 and before in there.
Also, what are the rules about switching versions? I know iMovie 9 much better, so can I start a project there and finish it in iMovie 10? I would like to gradually learn iMovie 10, but not all at once.
I assume that once a project is edited in iMovie 10, it can't be worked on in iMovie 9 anymore.

You have to update iMovie 9 projects to iMovie 10 from within iMovie 10 before they will appear in iMovie 10 as iMovie 10 uses a completely different project/event file system. After updating you can still work on projects in iMovie 9 but you won't see any changes made in iMovie 10 and you can't transfer them back.
I would have a good look at the iMovie 10 help files first since a lot is changed and some features have been discontinued that might be important to you.
In order to try out iMovie 10 on just one of your iMovie 9 projects, put the folders just for that project in a separate iMovie Projects and iMovie Events folder and hide the project and event folders containing the projects you don't want to update from iMovie 10 by enclosing them in a higher level folder (only projects and events folders in the Movies folder of the boot drive or at the root level of another drive or partition will be visible to iMovie).
I did it this way and I'm glad I didn't try to update evrything at once!
Geoff.

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections.

My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac

My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac and any suggestions?

In the AirPort Utility, I selected the Advanced tab, and then selected Port Mapping.
Q: What service do I choose from the drop-down menu? Also, where do I enter the two ports you mentioned? Public UDP Port(s)? Public TCP Port(s)? Private IP Address: Private UDPPort Private TCP Port?
still confused, I guess. Thanks!

I accidentally deleted "empty cache" from safari drop down, what are the keystokes for doing it manually?

What are the keystokes for doing it manually? or how do you reload it to the drop down menu?

"Empty cache" is not available in Safari 6. (It's not possilble to delete that option from the Safari menu).
Several workarounds.
One. From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar.
Now from the Safari menu bar click Develop > Empty Caches
Or, from the menu bar click Safari > Reset Safari.
Select: Clear History (that empties the cache as well as deleting history. Deselect all the other boxes, then click Reset.
Unfortunately, Safar 6 omitted the empty cache keyboard shortcut.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the settings for rework order quality inspection

HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?

Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT

I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?

the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.

What are the settings for automatic service PO?

What are the settings for automatic service PO?

Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you!

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What are the gestures for switching tabs in safari

Similar Messages

Maybe you are looking for