What are the images URI for Update , Add Applicant and unlock

what are the images URI for Update , Add Applicant and unlock
where can I find all images URI in OAF

For update - updateicon_enabled.gif
You can find all other in $OA_MEDIA derectory.
-Anand

Similar Messages

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • What are the config steps for contract mass change and quota arrangement?

    Hi friends
    what are the config steps for contract mass change and quota arrangement?
    Regards
    Raj Kumar

    Process Flow
    The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
           1.      Search for contracts
    You search for and select the contracts or the contract hierarchy that you want to change.
    Contracts that have the status Closed cannot be changed.
           2.      Define mass changes
    You specify the changes you want to make.
    You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
    Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
           3.      Simulate mass changes
    Here you can perform a trial run of your mass changes. This simulation step is optional.
    We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
    You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
    Background processing
    The system processes the changes in the background.
    If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
    The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
    Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
    The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
           4.      Carry out mass changes
    Here you apply the changes to the contracts.
    You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

  • What are the main uses for a Macbook Pro, and also for a Macbook Air?

    I'm curious of whether I should buy a Macbook Pro, or Macbook Air. Before I make my decision I would like to know what are the main purpaces for each Macbook.

    Here's an article that compares the two.
    http://news.cnet.com/8301-13579_3-57458148-37/13-inch-macbook-air-vs-13-inch-mac book-pro-which-should-you-buy/?tag=postrtcol;posts

  • What are the name servers for adobe business catalyst and how do I integrate muse with catalyst.

    thank you, i have to post play auditions by tomorrow.
    Dave

    Check the KB for the name servers: http://helpx.adobe.com/business-catalyst/using/change-site-domain.html
    For quick reference:
    Redelegate domain to Business Catalyst DNS
    To redelegate a domain, visit your registrar's website and log in to their control panel. After you log in to your registrar, go to the domain management section. Update DNS servers for your domain.
    It's necessary to apply the following DNS server addresses:
    ns1.worldsecuresystems.com (54.236.190.129)
    ns2.worldsecuresystems.com (54.246.209.121)
    ns3.worldsecuresystems.com (54.252.148.151)

  • What are the pre requisites for implementing ChaRM

    Hi
    We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
    Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
    Thanks & Regards
    Anand

    The listed pre-requisites for the implementation of ChaRM are;
    1.  Already completed the basic configuraiton of SAP Solution Manager
    2.  You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
    3.  you have setup business partners for the users (or at least 1)
    4.  satellite systems are at the minimum  support package level required (note 907768)
    5.  connections are available to the satelite systems
    6.  CTS+ if you wish to control non ABAP change requests through ChaRM

  • What are the special conversions for time in update rules?

    What are the special conversions for time in update rules?

    Hello,
    Special conversions for time in update rules are automatically conversion rules.
    Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
    Assign points if this helps,
    Regards,
    Jorge Diogo

  • What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

    I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
    Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
    I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
    TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: NTSC - CCIR 601
    Frame Size: 720 x 480
    Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
    Display Format: 4:3 Letterbox
    MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: Square
    Frame Size: 720 x 540
    Anamorphic: YES
    Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
    Please feel free to ask for clarification or further information you need to answer my question.
    Thank you so much in advance for your help!
    Best, Noetical.
    BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

    Hi Nick...thanks for taking the time to reply to my question.
    Nick Holmes wrote:
    What you have there is a mess.
    NTSC pixels are never square.
    NTSC is 720x486, even when it is Anamorphic.
    You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
    When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
    The same DVD will automatically letterbox on 4:3 TVs.
    Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version. 
    Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
    BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • In import PO - what are the g/l accounts updated.

    hi
    in import PO what are the g/l accounts updated.
    example:
    1.Miro(bill of entry) - 7 conditions if freight and clearing n forwarding
       Charges extra 2 conditions
    2.Migo
    3.Excise - J1iex_p
    4.Miro(for freight and clearing n forwarding)
    5.Miro(for main vendor)
    just tell me
    Regards
    Manju

    Hi,
    There are following 7 Import Duties;
    JCDB     IN:Basic Custom Duty
    JCV1     IN : CVD
    JECV     IN : Ed Cess on CVD
    J1CV     IN : H&SECess on CVD
    JEDB     IN : Ed Cess on BCD
    JSDB     IN : H&SECess on BCD
    JADC     Addnl Duty of Custom
    1. MIRO (Customs Office)
    Customs Office Vendor - Cr
    CVD Clearing A/c - Dr
    CVD Clearing A/c - Dr
    CVD Clearing A/c - Dr
    CVD Clearing A/c - Dr
    Customs Clearing A/c - Dr
    Customs Clearing A/c - Dr
    Customs Clearing A/c - Dr
    2. J1IEX (Capture BOE)
    No FI Entry
    3. MIGO (GR)
    Stock A/c - Dr
    GR/IR Clearing A/c - Cr
    Customs Clearing A/c - Cr
    Clearing & Forwarding Charges A/c - Cr
    4. J1IEX (Post BOE)
    CENVAT Input BED - Dr
    CENVAT Input ECS - Dr
    CENVAT Input SECess - Dr
    CENVAT Input ADC - Dr
    CVD Clearing A/c - Cr
    5. MIRO (Import Vendor)
    Import Vendor - Cr
    GR/IR Clearing A/c - Dr
    6. MIRO (Clearing Agent)
    Clearing Agent Vendor - Cr
    Clearing & Forwarding Charges A/c - Dr

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • What are the best approaches for mapping re-start in OWB?

    What are the best approaches for mapping re-start in OWB?
    We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux.
    We have number of mappings. We built process flows for mappings as well.
    I like to know, what are the best approches to incorportate re-start options in our process. ie a failure of mapping in process flow.
    How do we re-cycle failed rows?
    Are there any builtin features/best approaches in OWB to implement the above?
    Does runtime audit tables help us to build re-start process?
    If not, do we need to maintain our own tables (custom) to maintain such data?
    How did our forum members handled above situations?
    Any idea ?
    Thanks in advance.
    RI

    Hi RI,
    How many mappings (range) do you have in a process flows?Several hundreds (100-300 mappings).
    If we have three mappings (eg m1, m2, m3) in process flow. What will happen if m2 fails?Suppose mappings connected sequentially (m1 -> m2 -> m3). When m2 fails then processflow is suspended (transition to m3 will not be performed). You should obviate cause of error (modify mapping and redeploy, correct data, etc) and then repeat m2 mapping execution from Workflow monitor - open diagram with processflow, select mapping m2 and click button Expedite, choose option Repeat.
    In re-start, will it run m1 again and m2 son on, or will it re-start at row1 of m2?You can specify restart point. "at row1 of m2" - I don't understand what you mean (all mappings run in Set based mode, so in case of error all table updates will rollback,
    but there are several exception - for example multiple target tables in mapping without corelated commit, or error in post-mapping - you must carefully analyze results of error).
    What will happen if m3 fails?Process is suspended and you can restart execution from m3.
    By having without failover and with max.number of errors=0, you achieve re-cycle failed rows to zero (0).This settings guarantee existence only two return result of mapping - SUCCSES or ERROR.
    What is the impact, if we have large volume of data?In my opinion for large volume Set based mode is the prefered processing mode of data processing.
    With this mode you have full range enterprise features of Oracle database - parallel query, parallel DML, nologging, etc.
    Oleg

  • FAQ: What are the best resources for Premiere Pro CS6?

    Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
    Premiere Pro CS6 troubleshooting articles
    Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
    More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
    Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
    Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
    More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
    Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
    More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
    Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
    Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    Premiere Pro CS6 tutorials
    Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
    Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
    Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
    Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
    Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
    Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

    Hi ..
    GO to website www.Apache.org
    down load Apache tomcat server .
    install it ...
    Go to sun site
    c and download jsp tutorials ...
    Go to
    (www.coreservlets.com)download book core servlets
    u can find lots of nice books supported by sun on sunwebsite ...
    Now u r equipped ....
    start doing everything (R &D) on server ..
    Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
    I thing once u go through this ..it will do all what u want
    Hope it helps
    Best of Luck :)
    regds & take care

  • What are the new features for the latest version ...

    what are the new features for the latest version of N6300? can you cite me the newest features?

    The latest update was just bug fixes and improved stability, no new features. That is nearly always the case with series 40 phones like the 6300.
    Nokia do not make the changelogs available publicly but often they do appear on unofficial sites. Searching google may provide you with more detailed info that cannot be posted here.

  • What are the best practices for generating an EPS logo from InDesign?

    Our costomer is running into technical issues with the logo we sent them, which was exported from Indesign. Images were not embedded and fonts missing. I was able to embed the images and fonts. However, we DO NOT want them to be able to make any text changes. So after exporting an eps, I opened the file in Adobe Illustrator and made all the text outlines. I hope this works. But I just wanted to post the question on what are the best practices for doing this?
    The client needs the logo with transparent background, images emebdded and type in outlines. Also, they need some space around the text. When I exported the eps, the file is right up on the edge of the type.

    It sounds like you are pretty far from "best practice" with regard to logo design and delivery.
    These days, the very use of the EPS format should be considered bad practice, and some other terms in your post, (i.e., 'images,' 'missing fonts'), make it sound like there is not a seasoned logo designer involved.
    That said, you probably already got the advice you need to get out of the immediate jam. However, without proper logo design, you and the client will soon be facing other problems. You should be delivering a 100% vector graphic in single-color (black) and corporate-color(s) versions, with no live font data, that has been test-scaled to very small and very large sizes; ensuring it will work at postage-stamp size and on the side of a truck or building, with specific spot color(s) and proportions that will enable it to be offset printed, embroidered and screen-printed on apparel, and cut into signage materials and decals.

Maybe you are looking for

  • Problem in using FM READ_TEXT to read Material Sales Text.

    Hi Guys, I am developing a Customer Outstanding report in which I display all the invoices of a particular customer. I need  to read "Material Sales Text" which comes under "Item Text" tab in transaction FBL5N. I have used READ_TEXT in my program. I

  • TIFF & JPEG renders of RAW files appear different when viewed in Bridge

    I am working with the demo of Photoshop CS6, with ACR 7.1. CS6 System Info will appear at the bottom of this post. Summary: AMD Phenom II x6 1090T, 16GB RAM, Win7-64bit, nVidia GTX 460 video w/1GB RAM, approx. 2.5 TB free space on multiple internal p

  • Restoring backed-up files to different TX-2000

    I purchased a new Vista TX-2000 in 2008, which is now having motherboard problems.  It is backed-up with the "Backup and Restore Center" that came with Vista.  I depend daily on the unit for my business and have been told by HP Help that I may loose

  • SH.RPD in OBIEE 11G

    Hi, I am following OBE to create and SH.RPD in obiee11g. I noticed in the bi administration the "import from table" is gone and is now "import metadata". I was unable to linked to a database although I am using a datasource that I tested (in windows)

  • How I set character encoding for everypage and alway?

    I use Thai window 874 open the page when I select some website it contain Thai then click open new tab it change to western windows 1252. It can not display Thai. I must set character encoding to Thai windows 874 everytime.