What Are the Index Values of the MTTR and MTBF of the MA5600?

The networking environments are different and the device uses different boards. Therefore, the reference value of the MTBF of the MA5600 is 55 years and the reference value of the MTTR of the Field Replaceable Unit (FRU) is two hours. The preceding values
are only for reference. For details, contact the related Huawei engineers.
http://www.huanetwork.com/smartax-ma5600-series-price_c43

Similar Messages

Can you specify the allowable values for vertical range and offset for the NI 5112 PCI Digitizer?

The NI 5112 manual indicates that the vertical range can be set from +/- 25mV to +/-25V in 10% steps. Can you explain exactly what this means? (For example, could you give me a series of allowable values.)
Also, what are the allowable values for voltage offset?
The reason for my question is: I am specifying the vertical configuration using the niScope_ConfigureVertical() function. The observed raw (8 bit) sampling does not appear to change at all for small changes in voltage range and offset. I would like to know where the hardware breakpoints are, so that I can apply correct scaling from bits to voltage.
In addition, I have tried to use the niScope_CheckAt
tributeViReal64() function to "check" a value before applying it to NISCOPE_ATTR_VERTICAL_RANGE or NISCOPE_ATTR_VERTICAL_OFFSET, but it fails in the linking step in Microsoft Dev. Studio. (niScope.lib & niscope_32.lib do not seem to contain any of the CheckAttribute functions that are listed in the NI-Scope function reference.)
Thank you for your response.

There is a nice reference at:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/38f18d418e2433ed8625690e006bbe94?OpenDocument
which explains that allowable voltage ranges can be expressed by the equation:
next_range_value = range_value * 1.1 starting at +/- 25 mV.
When a range is specified that does not match this series, the device driver rounds UP to the next value.

How do I use the Index Values property node with a multidimensional array.

I am using a 2D array to store operator inputs on my front panel. I only want to display one element to the operator at a time. I am trying to use the Index Values property node to change the displayed element. However, I can only get the Rows index to work. How do I direct the Columns index as well? The help says to use one per dimension. I need clarification on what this is talking about. I've tried adding a second element to the property node, 2 seperate property nodes, and diferent wiring techniques. (series, parallel)

If you only wire up one of the inputs (col or row) what you get out is a 1D array of either the column or row. If you wire controls to both, then you will get one element out of the array. Getting a single element in a 2D array requires you to specify both a row and column.
Message Edited by Dennis Knutson on 02-08-2007 08:34 AM
Attachments:
Index 2D Array.PNG ‏2 KB

How to find bpel instance in 11g based on the index values using Java APIs

Hi ,
In SOA10G we had option to find the instances based on the index value using Java APIs like below.
WhereCondition criteria= new WhereCondition(SQLDefs.CX_index_1 + " = ?");
criteria.setString(1, "indexValue");
Locator mLoc = getLocator();
IInstanceHandle[] foundInstances = mLoc.listInstancesByIndex(criteria);
Please tell me how to achieve the same functionality in SOA 11G using Java APIs
Regards,
Saba

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?

Both my cameras are not working I took it in and they reset the phone and it still continued to happen what can I do?

If a Restore of iPhone with iTunes on computer does not get it working correctly. Then it is hardware problem. Apple with handle this with Replacement iPhone 4S exactly same as yours for $199. If there is any hope at fixing this otherwise, first step would be to replace the front (facetime camera) first. See if both cameras function after this. If not, if there is any fix possible it will be very difficult. Replacement iPhone may be best plan.

HT5787 I forgot to answer the secret question camels Store account and you follow the steps in the site account settings but I have not got any mail explains what are the steps involved

I forgot to answer the secret question camels Store account and you follow the steps in the site account settings but I have not got any mail explains what are the steps involved

Call your contry's number from http://support.apple.com/kb/HE57 and ask to speak with Account Security.

How to find bpel instance in 11g based on the index values

We have 10g BPEL process where we define 4 index values for all the instances. Whenever support request comes, we ask index values and based on that we search the process instance.
We have migrated this 10g bpel process to 11g now. How to find bpel instance in 11g based on the index values ???

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

HT1349 i over scratched the code on my itunes card and some of the digits are missing what do i do?

i over scratched the code on my itunes card and some of the digits are missing what do i do?

Copied from another discussion. Taken from the More Like This box on the right side of your post.
On the bottom of your card, beneath the barcode, you will se a long number that starts with GCA, PBH, or maybe 6. That is the card serial number.
Go to apple.com/support/itunes/contact.html to email the iTunes store support.
Just explain that the redemption code was scratched off, and give them the card serial number. Someone from the iTunes Store will email you back with the cards redemption code.

How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem

Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!

Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

With supervised ipads, what is the best way to transfer photos and videos from the ipad to the PC? Wireless transfer is not an option in our circumstances

With supervised ipads, what is the best way to transfer photos and videos to the PC? Wireless transfer is not an option in our circumstances.

There are only two ways of transfering things on the iPad.
- via WiFi
- via usb cable
From what I have read, you need to connect to iTunes on the supervising PC.
Robert

I bought an iPhone 5S in the USA, however he warmed up and took off the screen, I live in Brazil and they do not give assistance to my device, but I can not go back to the U.S. just to change the iphone, what should I do to solve my problem ?

I bought an iPhone 5S in the USA, however he warmed up and took off the screen, I live in Brazil and they do not give assistance to my device, but I can not go back to the U.S. just to change the iphone, what should I do to solve my problem ?

I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport" it replies it cannot locate it)
I suppose everything will be fine when you'll be out of censorship....
Perhaps iOS Apple Maps are absolutely useless for expatriate in China.
Use Google Maps instead
BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

What is the difference between Commitment, assigned, actual and available in the shopping cart process

What is the difference between Commitment, assigned, actual and available in the shopping cart process? Also what are the different commitment stages?

Hi Tejas,
Is these terms related to WBS Budget ?
If yes, then they are just general terms FI use in WBS.
Actual : Actual budget assigned to WBS
Assigned : Budget consumed after SC is approved and PO is created
Committed : Budgete assigned to a SC or PR (PO not created)
Available : Available budget (Actual - Assigned - Committed)
Best Regards,
Anil

I have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing

i have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing my contact lists and purchased apps?

okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed. Where do i find the backed up info from my phone?

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

What Are the Index Values of the MTTR and MTBF of the MA5600?

Similar Messages

Maybe you are looking for