What are the integration points with sd and pm
hi,
sap gurus,
good morning to all,
what are the integration points SD and PLANT MAINTAINCE.
REARDS,
balaji.t
09990019711
Balji,
There is no major integration b/w SD and PM.
But PM is integrated with CS for all service and repair orders.,
If you really want to see where they can be ssen integrated
Eg:
Pm deifines the roles for the people in shopfloor,if you can make use of these roles and give authorization of removal of credit block to them then it is integrated.
Even when a new machine is purchased or repaired or overhauled the amount is passed to repective cost center internally.
regards
Similar Messages
-
What are the integration points with sd and qm
hi,
sap gurus,
good morning to all,
what are the integration points with SD and QM.
in r/3.
regards,
balaji.t
09990019711Dear balaji
Before doing PGI, there will be a preinspection stage where SD will have to integrate with QM. Similarly after sales, whenever there is sales returns, QM will come into picture.
To control the above scenarios, in material master, go to "Quality management" view and click on "Insp.setup" where you need to assign Inspection Types like 04, 06 etc.
thanks
G. Lakshmipathi -
What are the integration pts of RFX and Reverse Auctions & ways of creating
Hi Friends
What are the integration points of RFX and Reverse Auctions & ways of creating them
Regards
Surya
Edited by: surya K on Jan 14, 2009 4:56 AMHi Surya
You need to be more clear on the thread.
Please detail out what you are looking at
Whether you are trying to integrate SRM Bid Invitation O/P to SAP E-Sourcing RFx draft
or some other integration.
Please spell out clearly
Regards
Tridip Chakraborthy -
What are the integration points of SCM with SRM?
Hi Friends
What are the integration points of SCM with SRM
Regards
Raj Kumarplease check whether this helps..
[http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm]
[http://www.sap.com/industries/highered/pdf/BWP_Self-Serv_Proc.pdf]
[http://www.sap.com/solutions/business-suite/srm/index.epx ][http://www.ies.state.pa.us/srm/cwp/view.asp?a=3&q=197102&srmNav=%7C]
karthick -
How Oracle ASCP and Inventory are integrated ,what are the Integration poin
Hi All Gurus,
Can any one tell me..
How Oracle ASCP and Inventory are integrated ,what are the Integration point of these modules ...?
Thanks,
SatyamHere is a simplistic explanation on the the integration.
When you launch data collection from the ASCP side, Oracle launches a Refresh Snapshot process that gathers the latest inventory (and other modules) information into Snapshots. Snapshots are like materialized views. Then the Planning Data Pull is launched. That process pulls information from these snapshots into the ASCP side.
The following inventory information comes over to ASCP
Item master data (such as order modifiers, planning exception sets etc. )
item categories
Onhand quantities (including consigned invetory quantities) in nettable locations
subinventories
reservations
safety stocks
forecasts
item planners
Quantity in receiving or in transit
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026 -
What are the main points to freeze technical scenario in SRM?VeryUrgent Pls
Hi SRM Guruu2019s,
What are the main points to freeze technical scenario in SRM?.
Please mention main points to select Classic Scenario and Extended Classic scenario individually.
I would really appreciate.
Regards,
John.
Edited by: johnmiller465 on Nov 12, 2009 3:30 PMi believe what is your PPS version / SRM version
generally PPS works on EXtended Classic
http://wiki.sdn.sap.com/wiki/display/SRM/PPS-ProcurementforPublicSector-+enhancements#PPS-ProcurementforPublicSector-enhancements-PPSprocessisbasedinExtendedClassicscenario
Procurement for Public Sector - PPS1.0: An Overview
Ralf Wolfgang Geithner
Business Card
Company: SAP AG
Posted on Nov. 20, 2007 11:57 AM in Public Sector Subscribe
Print
Permalink
Introduction:
SAP PPS1.0 is an addon to SAP SRM5.0 addressing requirements of public sector procurement. SAP SRM is used as functional frontend to support the main procurement processes:
Public tendering
Awarding
Contract negotiation
Purchase order creation
SAP PPS1.0 has been designed to work in the extended classic scenario, where SAP ERP 2004 functions as backend supporting the processes:
Sales Order processing
Purchase Requisition processing
Goods Receipt processing
Invoice Receipt processing
Main Features:
PPS 1.0 features a couple of unique functions designed for the needs of public sector customers, namely:
Document Builder Integration
Records Management Integration
Smart document numbering
Funds Management integration
Acceptance at Origin
Central Contractor Registration (CCR)
Contract Tracking and Monitoring
Close Out Execution
Enhanced Versioning
FPDS Reporting
Guaranteed Minimum
Maximum Quantity per Period
Public Sector User Status
Reason Codes for Document Changes
Smart numbering of procurement documents
Selective Release
Sourcing Priorization
In the next couple of blog posts I want to describe the different features and give some guidelines for the implementation of the functionality.
What Next?
I plan to start with the smart numbering which is called as well "long procurement number"
Ralf Wolfgang Geithner is Senior Developer in Procurement for Public Sector core team -
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridharHi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula -
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework for
building the web service is better and more adaptable and Workshop provides a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0 have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.If you want to take existing WLS6.1 web services and convert them to WLS7.0 you can
do so quite easily. The WLS7.0 Ant still supports wsgen so you do not need to even
change your build.xml file. The generated web service however will be implemented
is a manner compliant with the WLS7.0 environment. More details are at:
http://e-docs.bea.com/wls/docs70/webServices/anttasks.html#1070576
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services
cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality
than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach
of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework
for
building the web service is better and more adaptable and Workshop provides
a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0
have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps. -
What are the difference between 4.6c and 4.7 versions?
what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanjiHi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
OS - windows 2003 server
DB - Oracle 9i
SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc. -
What are the differences between ECC5.0 and 6.0 new GL functionality
Hi Experts,
What are the differences between ECC5.0 and 6.0 new GL functionality.
If we want to implement IFRS, I think New GL functionality is very helpful, but why sap is recommending only for ECC6.0 new GL functionality, Eventhough this functionality is available in ECC5.0.
Best Regards,
DharaniDear,
ECC 5.0 vs. ECC 6.0/SAP ERP 6.0
Functionality not available in the new G/L with mySAP ERP 2004 and ERP Central Component (ECC) 5.0:
Transfer prices
Statistical key figures
Euro translation
Audit Information System (AIS)
Archiving
Data retention tool
Regards,
Chintan Joshi. -
How to find out what are the interfaces used for Job and Job Codes
HI All,
I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
Thanks In Advance
SunnyHi,
Here is an idea for your request.
Basically you can create a simple query on multiprovider 0TCT_MC01.
Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
Choose following characters into your objects:
InfoProvider ( 0TCTIFPROV ) - you can create a variable for choosing infoprovider before query runs.
*Tp.[Type of BI Application Object] 0TCTBISOTYP = filter this with 'QUERY' or whatever your need is.
*BI Application Object 0TCTBISBOBJ, ( this will give you the name of the queries)
In key figures choose, Count for BI Appl. (0TCTWTCOUNT).
(number for query run)
Create a condition , for top 20.
Hope this helps.
Derya -
What are the major differences between BODS and Talend ?
Hi Friends,
We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS. Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
Thanks,
Bheem.Hi,
If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems. -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
What are the differences between Captivate 6 and 7?
What are the differences between Captivate 6 and & 7?
Check the Captivate blog. BTW there were 3 versions of 6 (each with different features), and already 2 versions of 7.
http://blogs.adobe.com/captivate/2013/12/the-most-awaited-enhancements-in-advanced-actions -and-variables-are-here.html explains the new features in 7.0.1.
You can also find articles on the features of 7. -
What are the differences between SunFire 880 and v880?
What are the differences between SunFire 880 and SunFire V880?
Did a search for "SunFire 880" and found links to the V880 but nothing for the one without the V:
http://www.sun.com/servers/midrange/v880/There are four machines in the server room, two rather old and not in service right now, the other two are relatively new and are now in service.
The print on one new and one old machine is "*SunFire 880*" and
the print on the other two (one new and one old) is "*SunFire V880*".
No, it's not that the paint is chipped or any such thing and there is no space for a "*V*" in the print.
btw, of the two that are in service, both have the same OBP version, if it matters.
Hence it appears that Sun indeed sold machines with V and without V.
So, what are the differences?
Edited by: ad101 on Aug 25, 2009 5:14 PM
Maybe you are looking for
-
HT5642 Unable to download app this time error while downloading app please help!!!
when i download some app from apps store i get the following error "Unable to download app this time error while downloading app" please help!!! i ve tried these Things but didnt workout yet 1) i tried hard reset 2)i tried logout/login Itune & appsto
-
Alternative LDB for TIF (Treasury Information System)
Hi Experts, In our Z report using LDB "TIF". If i execute the report immidiatly getting pop-up error message with This program is old and is not part of the standard system . More discription about error as bellow. This program is old and is not par
-
Hi: Just received my Apple TV and am trying to get the most out of my network. I have previously purchased an Airport Extreme base station and have the network up and running. I have checked the Network Utility and it is telling me I am presently run
-
Color Correction + DVD/MPEG Compression Produced Noise
I recently color corrected a 3-hour rock concert using FCP and a broadcast monitor. When played from the timeline the concert looks great however after outputting, MPEG compression and authoring a DVD there's video noise over the image. Almost snow l
-
Some items were not copied LR5
When importing into LR5, Lightroom shows a progress bar which moves along and says importing files. After a few minutes the progress bar reaches the end, and Lightroom says some files were not imported and lists allt he files that should have importe