What are the issues/precautions while upgrading nsoftware.ipworks v3 to v4
Hi All,
currently we are using nsoftware.ipworks version 3 adapter, we want to upgrade it to Version 4,
we are using this adapter API's heavily for downloading and uploading files in FTP,
the following is the screen shot of the current version.
and the new version is as below,
please advice what are the prerequisites to be taken before we upgrade it.
Thanks,
Sarva.
I am sure you must have bought licensed version of nsoftware BizTalk Adapters.
You should ask this question to the nsoftware experts, I am sure they can provide you the best advice as they are owner of the product.
Go to -> Request for Technical Support
Rachit
Please mark as answer or vote as helpful if my reply does
Similar Messages
-
What are the Issues in Migration from oracle 8i to oracle 10g
Hi,
Can you let me know what are the issues that i face when i migrate from oracle 8i to oracle 10g. I will be very thankful if you give me a list of issues that you face while migrating from 8i to 10gIn addition to Max's reply, you must be aware that you have to test your applications agains 10g database before you actually upgrade the database.
If you use CBO, it may produce different execution plans for one query when you run it in 8i and 10g. This may affect your application performances, which you don't like to happen.
Also you have to decide how much downtime you can afford during the migration. Can you afford some downtime and how much? If you can't than this makes the situation more complicated.
How big is your database? You may end up only with simple export/import solution using export import utility.
The bottom line is, whatever you decide, you must test your applications running against 10g database before you actually upgrade your database. -
What are the mandatory fields while creation of material master in differen
what are the mandatory fields while creation of material master in different views?
Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram -
What are the common error while EBS installation in Unix /windows
what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regardsHi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios -
What is ECC6.0 and what are the business benefits by upgrading ?
what are the Business Benefits of upgrading SAP R/3 4.7 to ECC6.0 , can some one explain in brief..?
Thanks and Regards,Hi,
Refer to about ecc 6.0.
Regards
Bala -
Anyone tried using Billings 3 in Yosemite - what are the issues, if any?
Anyone tried using Billings 3 in Yosemite - what are the issues, if any?
Hi
Logic Express is essentially the same as Logic Pro, minus a few Instrument plugins and a few Effects Plugins (there are some other slight differences, but nothing that is likely to cause any significant problems).
You/she will be able to open Pro projects in Express fine, but if any of the 'missing plugins' have been used these will not be found in Express. For Instruments plugs, this might cause a problem because the tracks will not play unless a replacement plugin is selected. For Effects plugins, you might be missing some, but the project should play OK, just sound a little different.
Should these issues become a problem, one solution would be to use the "Bounce in Place" feature to print these tracks as audio temporarily in Logic Pro.
Logic Studio (Logic Pro) comes with all the Jampacks, Express does not. If any loops from the Jampacks have been used, you should be OK as long as the project has been "Saved with Assets.. including Imported Audio". This will copy any loops used into the project folder.
In short, nothing insurmountable.
HTH
CCT -
When migrating from Bo6.5 to Bo4.0 what are the issues we will face?
Hi all,
When migrating from Bo6.5 to Bo4.0 what are the issues may come?
Thanks,
Hari.Hi,
first of all you cant direnctly migrate from BO 6.5 to BI4. You have to migrate prior from BO 6.5 to XI 3.1 and afterwards to BI4.
This is a huge step cause BO 6.5 is a very legace version. You will face a lot of issues with the Security. You have to totally re- design it. You will also face issues with BCA Jobs. Also here you have to do a complete re- design. If you only use Full Client Reports you have to convert them to WebI in XI 3.1 prior to migrating them to BI4 cause with BI4 the support of DeskI has been stopped.
Maybe you consider to consult the SAP Consulting devision. This kind of Migration will be challenging.
Regards
-Seb. -
Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP
Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
What are the methods called while navigating from one applet to another one
Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100
-
What are the recommended steps to upgrade from CF7 to CF8
I have read all of the documentation for how to upgrade from
CF 7.02 to CF 8. Well there is actually only one blurb in all of
the CF docs.
"Upgrade installation You can upgrade from ColdFusion MX,
ColdFusion MX 6.1, and ColdFusion MX 7. When upgrading from
ColdFusion MX, ColdFusion MX 6.1, or ColdFusion MX 7, the installer
preserves the existing settings and installs in a new directory,
automatically assigning ports that do not conflict with the
existing installation."
OK that sounds simple enough, so i went ahead and installed
it. Well it did not work, now I am stuck somewhere between 7 and 8.
My basic step, as I can best recall at 1:00AM.
* Select Multi server Configuration
* Select install path, I used D:\JRun4
* This is where my existing cf7 install was located
* installer told me port 8300 was being used so it gave me
port 8306 instead
* Selected d: for ColdFusion8DotNetService install path
* Select Passwords for admin and rds
* installed cf
* received error after install
(Adobe_ColdFusion_8_InstallLog.log)
ANT Script Error:
Status: ERROR
Additional Notes: ERROR - jrun.xmlUnable to remove existing
file D:\JRun4\bin\jrun.exe
* rebooted
* can't login to cfadmin at port 8306
* tried to login to cfadmin at port 8300, everythin works
* it appears the cf7 services are still running,
* didn't notice any new cf8 services, excpet the dotnet
stuff
Any assistance would be appriciated.
I am on windows 2003/CF8EE/Multiserver configurationA_B wrote:
> I have not seen anything come out from Adobe on this
subject but I did talk to
> two of the CF engineers at the Max Conference regarding
this issue. I spoke
> with Dean Harmon and Tom Jordahl about this issue. Here
are the basic take
> aways from what I recall. I have not yet attempted this
but will be sometime
> in the next month or two. There are a few options but
basically JRUN is an
> updated version with CF8 and there is a new JRE that it
runs on
Essentially CF comes with the updates that will become JRun 4
Updater 7
integrated into it. (The beta of Updater 7 is under way).
> - Backup existing JRUN directory (c:\JRun4 or whatever)
completely.
> - Make a backup of all the existing CF settings via a
CAR file in the CF admin.
> - Do an uninstall of your CF7 installation. This goes
against my better
> judgement since you should not need to uninstall 7
before installing 8 since
> there should be an upgrade path. I understand that there
are differences with
> JRUN etc ... but this should be done via an install.
> - Install CF8 and then restore your settings via the CAR
file. If you are
> crafty enough I believe you can also bring back all the
XML files and set a
> flag to let the CF admin to an upgrade.
Use the CAR file, XML file formats have changed between
versions.
> I want to also note that this is for the multi-server
install on top of JRUN
> in which you already have JRUN installed with CF7. I'm
surprised that Adobe
> has not released better instructions on how to do this
but they haven't and
> they seem to have let us to try to figure this out which
is completely wrong of
> them. How hard is it to write up a tech article.
What you are describing is a simultaneous update of JRun and
CF. For
just an update of CF you need to redeploy the CF EAR file as
described
in the JRun manual. For just an update of JRun you have to
wait until
updater 7 is released (or join the beta and file bugs if you
don't like
the procedure).
> Another possible option would be to update JRUN with the
latest release,
The latest release is only updater 6.
> download the latest JRE and create a custom jvm.config
file to use for the new
> JRE. Then you would create a new instance of JRUN using
the JRUN console and
> deploy a CF8 EAR/WAR file to it. You still then have the
issue of getting
> settings and things transferred.
Use a CAR file for that.
> This seems possible to do it this way but does not seem
as clean at all.
In place upgrades are never clean. In my book, an upgrade
means
rebuilding from scratch.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion -
Apogee Ensemble: What are the issues it has with Logic 8?
I've read raving reviews about the Ensemble--one of which describes it as being a huge improvement over a MOTU 828mkII, which I happen to have. At the same time, I've seen some posts in this forum about the issues the Ensemble has with Logic 8. I couldn't find, or understand, what those issues are.
Can someone explain to me what problems I might encounter if I get an Apogee Ensemble? I'd much appreciate it.Mackie control with Logic 8 is all over the place, i was surprise to see this the Stop Play Rewind and so forth is at fault, the faders works so i have to use the Controls on screen, i take it Apple will soon update the Control-units to work properly with Logic 8, even though L.8 is pretty new, but i find Logic 8 to be very impressive,
Fr. BlayZay. -
I have an application of Lookout 4.0 running and the customer has asked for a spare HMI. What is the easiest way to get them what they are asking for? Can I buy a PC with NT loaded and purchase another runtime application of the Lookout runtime software? Is it buying another PC with XP/Vista and upgrading the development software as well as the application and the runtime software. What would be the best?
Download the latest evaluation of Lookout and test it the process files.
This will let you you know what to expect.
Mike
Mike Crabtree - Lead Developer
Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
(866) 964-6948 / (760) 247-9512 -
I recently tried to upgrade my call manager in a lab environment from 9.1.1 to 9.1.2 but failed. The error stated that connection had been lost after 2 hours into it. Connect using CLI. Any help would be greatly appreciated.
SteveYou mean via GUI??
What does the upgrade status via CLI says?? -
What are the best practices in upgrading from mac OS 10.5.8 to Mountain Lion?
I what to upgrade two iMac's from 10.5.8 to Mountain Lion. I have the harddrives backedup. I also have Snow Leopard family pac on disc.
I want to know the best way to upgrade and get a clean install of the new OS.First check that the Macs will run Mountain Lion.
Then install Snow Leopad
Update to 10.6.8 for App Store needed for Mountain Lion
Using App Store purchase, download and install Mountain Lion.
Allan -
What are the consultant roles in Upgradation or migration project
Hello ,
Would you please any dody help me to provide the role & responsibilities of consultant in SAP upgradation or migration project.Thanks.
Regards,
SampallyDear Sampally,
SAP defined a roadmap for upgrade.
1) Project Preparation
Analyze the actual situation
Define the objectives
Create the project plan
Carry out organizational preparation for example identify the project team
2)Upgrade Blueprint
The system and components affected
The mapped business processes
The requirements regarding business data
3)Upgrade Realization -- In this phase the solution described in the design phase is implemented in a test environment. This creates a pilot system landscape, in which the processes and all their interfaces can be mapped individually and tested on the functional basis.
4)Final Preparation for Cutover -- Testing, Training, Minimizing upgrade risks, Detailed upgrade planning
5)Production Cutover and Support
The production solution upgrade
Startup of the solutions in the new release
Post processing activities
Solving typical problems during the initial operation phase.
SAP expects at least 2 to 3 months for Upgrade and that again depends on project scope and complexity and various other factors.
STEPS IN TECHNICAL UPGRADE
Basis Team will do the prepare activities. (UNIX, BASIS, DBA).
Developer need to run the Transaction SPDD which provides the details of SAP Standard Dictionary objects that have been modified by the client. Users need to take a decision to keep the changes or revert back to the SAP Standard Structure. More often decision is to keep the change. This is mandatory activity in upgrade and avoids data loses in new system.
After completing SPDD transaction, we need to run SPAU Transaction to get the list of Standard SAP programs that have been modified. This activity can be done in phases even after the upgrade. Generally this will be done in same go so that your testing results are consistent and have more confident in upgrade.
Run SPUMG Transaction for Unicode Conversion in non-Unicode system. SPUM4 in 4.6c.
Then we need to move Z/Y Objects. Need to do Extended programming check, SQL trace, Unit testing, Integration testing, Final testing, Regression Testing, Acceptance Testing etc.,
The main Category of Objects that needs to be Upgraded is
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
Also refer to the links -
http://service.sap.com
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.id.unizh.ch/dl/sw/sap/upgrade/Master_Guide_Enh_Package_2005_1.pdf
Hope this helps you. Please let me know in case of any specific queries.
Regards,
Rakesh
Maybe you are looking for
-
How can I get the printed message of stored procedure in JPA
Hi, I'm using JPA to invoke stored procedure in database, a segment of the sproc is like below: if @create_type != 'a1' and @create_type != 'a' begin print 'create type must be either ''a1'' if you pass in A1 ID, or ''a'' if you pass in Use
-
IPod Touch electric shock.
I have an iPod Touch 4G. When I connect the usb to my computer and the 30-pin to my iTouch, it gives me electric shocks. As it is, the iPod Touch 4G has a metal back, and it really conducts the current. Fortunately, i have a rubber case for the back,
-
Hi can i give Aleternate color to records in crystal reports? Thank you
-
Problem in activating the Funds Management BCS and Availability Control
Hi experts. After running the program RGLIUGEN to generate the required includes in program SAPLGLIU, the generated programs come with syntax errors. When I manually correct the errors ,the program post the budgets and budget releases but does not up
-
Hello! we have WLC 5508 (6.0.188.0) and some converted APs AIR-AP1141N-E-K9. Everything works fine except one moment: 1 of this converted APs is located beyond the office building, but it is still connected to our local network as if it was located