What are the key presses like on the Enhanced Performance keyboard?

Hi guys,
I've been thinking about buying this keyboard:
http://shop.lenovo.com/SEUILibrary/controller/e/gbweb/LenovoPortal/en_GB/catalog.workflow:item.detai...
I was wondering how the key presses feel? I'm quite particular about it. I like the press to have a definite 'soft click' (like a cross between a microswitch and a diaphragm). A lot of keys these days are like pressing a spring with no tactile response as to when a key press has actually been registered if that makes any sense.
Can anyone with this keyboard describe how the keys are to press? I can't find and videos or any real life examples to test.
Thanks,
Leo

if you are looking for tactility in a keyboard, than this keyboard is not the best. Maybe you should get a Filco keyboard instead.
Microsoft and Dell's keyboard (the one with oversized spacebar) are both slightly better than these Lenovo keyboard. Alternatively get the Space Saver II keyboard.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

How to check what are the enhancement done for MIRO transaction

Hi Experts,
Please help me out, how to check what are the enhancement done for MIRO transaction.
Thanks in advance.
Thanks,
Basanagouda

Hi
Use the BADI
Please refer these documents: [Enhancements required in MIGO|Enhancements required in MIGO; and
[Enhancement in MIGO for Goods Movement|Enhancement in MIGO for Goods Movement;
Hope this helps!!
Regards
Vijay

What are the enhancements of ECC5.0 version compared to 4.6c

HI
what are the enhancements of ECC5.0 version compared to 4.6c

With a little experimentation, I've discovered a number of useful things about iTunes in the past few weeks. Most important is that the iTunes folder (remembering to remove the iTunes music first) can actually be backed up to another drive, and then even shared with another computer directly. Very simple and effective.

What are the enhancements available for LIS?

What are the enhancements available for LIS?

Hello,
Check if this weblog may help you:
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
There, you have a good article about this on link: Enhancing LO DataSource Step by Step
Kind regards,
Edited by: Bruno Garcia on Jun 3, 2008 12:24 PM

What are the reporting performances can we do?

What are the reporting performances can we do?

Hi,
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Hope this helps.
Thanks,
JituK

What are the Enhancements on Joins in 10g

Can you please explain me the enhancements on Joins in 10g?

Akhil Raman wrote:
Can you please explain me the enhancements on Joins in 10g?Not much. Some minor bug fixing with regards to Ansi Joins, but the base logic is identical to what was there already in 9i.

What are the extra features in 5.1

I really am after a matrix of comparison features for 4.5.1 and 5.1, in the
          area of clusters / load balance / performance..
          What are the enhancements
          tell me why I should upgrade?
          whats the prime reason?
          what extra network / cluster / performance features are available?
          Simon


Simon,
          I suggest taking a look at two different things:
          1 -- the release notes for version 5.1. They have a complete summary of
          what has changed.
          2 -- the marketing materials available on our external website: www.BEA.com
          Thanks,
          Michael
          Michael Girdley
          Product Manager, WebLogic Server & Express
          BEA Systems Inc
          sbadway <[email protected]> wrote in message
          news:8g4738$an6$[email protected]..
          > I really am after a matrix of comparison features for 4.5.1 and 5.1, in
          the
          > area of clusters / load balance / performance..
          > What are the enhancements
          >
          > tell me why I should upgrade?
          > whats the prime reason?
          > what extra network / cluster / performance features are available?
          >
          > Simon
          >
          >

Recently bought a MacBook Pro And sometimes Delete key is detached (loose). I would like to know what are the steps to take to repair it?

Recently bought a MacBook Pro And sometimes Delete key is detached (loose). I would like to know what are the steps to take to repair it?

If it is within the warranty period, take it in to an Apple store genius bar for repair.
Ciao.

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What are the functions of all the keys on my (not wireless) keyboard?

what are the functions of all the keys on the (non wireless) keyboard?

System Preferences > Language and Text > Input Sources tab. Top of the left column, tick (check) "Keyboard and Character Viewer", Bottom of window next to search field, tick "Show input menu in menu bar"
System Preferences > Keyboard > Keyboard tab; tick "show keyboard and character viewers in menu bar"
If you open Keyboard Viewer and press the alt (option) key, the location of the diacritical marks and common symbols will be revealed. Note that five of them are highlighted in orange; these are the ones which can be used with multiple letters (acute, umlaut, gràve, circumflex and tilde)
Shift+Alt will show more.

What are the Entrie For ETT Keys In CIN

Hi,
This is harish i would like to know what are the entrie when system pick ETT Key for DLFC
what is the entrie for GRPO
what is the entry for EMPO
what is the entry for CAPE
Regards,
Harish

Hi,
Please refer to this link for better understanding of CIN
[CIN|http://www.docstoc.com/docs/8264622/CIN]

What are the shortcut keys for new tab page?

It looks like the new tab page (Firefox 13, with the
screenshots of your popular pages in it) is a mouse-only
feature.
Is this correct? What are the shortcut keys to access
the links on the page?
thanks,
Patrick

Hi,
As of now there aren't (most likely) keyboard shortcuts. Please also see [https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites this] for working with the new tab page.

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

What are the key requirements to write a recursive cte?

what are the key requirements to write a recursive cte?
when we will go for a recursive cte.

A common table expression (CTE) can be thought of as a temporary result set that is defined within the execution scope of a single SELECT, INSERT, UPDATE, DELETE, or CREATE VIEW statement. A CTE is similar to a derived table in that it is not stored as an
object and lasts only for the duration of the query. Unlike a derived table, a CTE can be self-referencing and can be referenced multiple times in the same query.
A CTE can be used to:
Create a recursive query. For more information, see https://technet.microsoft.com/en-us/library/ms186243%28v=sql.105%29.aspx
Substitute for a view when the general use of a view is not required; that is, you do not have to store the definition in metadata.
Enable grouping by a column that is derived from a scalar subselect, or a function that is either not deterministic or has external access.
Reference the resulting table multiple times in the same statement.
Source : https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

What are the key presses like on the Enhanced Performance keyboard?

Similar Messages

Maybe you are looking for