What are the limitations of AMS5 only allowing one-way broadcast for the video capture support?
I am interested in a tool that can access a clients webcam and begin recording from their device. When the time is up, it should store that recorded video to a server. Then, of course, the files can be accessed. Streaming is of less significance than simply capturing and accessing video from a client
Can I do this with only Adobe Media Server Standard Edition?
Bearing in mind, I may need to be capturing video from multiple clients at one time. Is this limited by the fact that Standard only allows "one-way broadcasts?"
Thanks,
Carl
Thanks for the suggestions. I've tried using DVCPRO HD in the past, but the picture quality of the captured screen footage turns out blurry. The only codecs I've found that provide a perfectly clear image are H264, Animation and Uncompressed 8-bit. The problem with the latter two is that video files lasting only a few seconds measure in the 100s of MBs. Working with files that large would slow my editing and rendering down to a non-workable length.
I just don't understand why I can't edit H264 video if my sequence codec is set to H264. The 'Codec error' I get is baffling.
Similar Messages
-
What are the objects that support variables?
What are the objects that support variables?
Using Variables: The Variable Wizard and the Variable Editor
Definition
Variables are parameters of a query that you defined in the Query Designer and that are filled with values when you execute the query or Web application. They serve as a store for characteristic values, hierarchies, hierarchy nodes, texts and formula elements, and can be processed in different ways.
The processing type determines how a variable is filled with a value for the runtime of the query or Web application.
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
Variables are reusable objects. This means that when you define a variable for a query in the Query Designer, this variable can be used in all other queries. Variables are not dependent on the InfoProvider, only on the InfoObject. A variable that you define for an InfoObject is available in all InfoProviders that use this InfoObject.
Use
Variables enable you to customize queries flexibly (parameterize the query) possible. If you use variables in the Query Designer, do not select any fixed characteristic values, hierarchies, hierarchy nodes, texts, or formula elements. Instead, set up variables as place holders. These are then filled with values when the query is running (when you insert the query into a workbook, when you refresh the workbook or when you execute the query on the Web. You can use one query definition as the foundation for many different queries if you use variables.
You want to create one query for all the people responsible for customer groups, who each only evaluate the data for one customer group. In the Query Designer, you insert a variable for the characteristic u2018customer groupu2019. Just before the query is executed, decide for which customer group(s) you want the query to apply to.
There are two tools in the Query Designer for designing and changing variables.
The variable wizard takes you step-by-step through the process of defining a variable. Each individual step is context-sensitive and is adjusted according to the combination of variable and processing types used. This means that the variable wizard only offers the selection options that are permitted for that combination of variable and processing types. For more information, see Defining Variables with the Variable Wizard.
The variable editor dialog box offers all of the selection options for changing an existing variable. The individual fields in the dialog box show the settings affected in the variable. You can change these settings here. If you want to make the changes using a step-by-step process with explanatory texts, you can jump to the variable wizard using . For more information, see Changing Variables in the Variable Editor.
Integration
The variable wizard and the variable editor are functions in the Query Designer and are context-sensitive.
In principle, the two dialog boxes appear wherever you can enter constants (that is, values) in input fields. One of these input fields is the Entry of Variables checkbox. If you select this option, the following options for using a variable appear, instead of a fixed value:
· The variables that are available appear in the dropdown box for the input field. You can select a variable from the dropdown box.
· The symbol Change Variable appears next to the Entry of Variables checkbox. You can change the variable using . The Variable Editor dialog box appears.
· The symbol New Variable appears next to the Entry of Variables checkbox. Choose if you want to create a new variable. The Variable Wizard dialog box appears.
By way of an example, when defining conditions for the value limit of the condition, you can not only enter fixed values but also formula variables. Mark the Entry of Variables checkbox and you can then use the options described above. The settings are context-sensitive so that the formula variables that only those formula variables that are available appear in the dropdown box. The variable wizard is set up automatically in the same way for entering formula variables.
You can also get to the variable wizard and the variable editor from the context menu of those objects for whose values you can define variable placeholders. From the context menu, choose New Variable. The SAP BW Variables Wizard appears. In the context menu for variables that have already been defined, you can choose Edit. The SAP BW Variables Editor appears.
In the InfoProvider objects dialog box, you select a characteristic (for example, Order) and from the context menu, choose New Variable. You reach the variable wizard, which is already set up for you to enter a characteristic value variable.
In the InfoProvider objects dialog box, you select a characteristic value variable and from the context menu, choose Edit. You reach the variable editor where you see all of the settings for the variable. You can make changes to the variables here.
Variable Types
Definition
The type of variable being used. This determines the object that the variable represents as a placeholder for a concrete value.
Structure
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
· Characteristic Value Variables
Characteristic value variables represent characteristic values and can be used wherever characteristic values are used.
If you restrict characteristics to specific characteristic values, you can also use characteristic value variables. See, Restricting Characteristics.
· Hierarchy Variables
Hierarchy variables represent hierarchies and can be used wherever hierarchies can be selected.
If you restrict characteristics to specific hierarchies or select presentation hierarchies, you can also use hierarchy variables. See Selecting Hierarchies
· Hierarchy Node Variables
Hierarchy node variables represent a node in a hierarchy and can be used wherever hierarchy nodes are used.
If you restrict characteristics to specific hierarchy nodes, you can also use hierarchy node variables. See Restricting Characteristics: Hierarchies
· Text Variables
Text variables represent a text and can be used in descriptions of queries, calculated key figures and structural components.
You can use text variables in the description of calculated key figures, restricted key figures, selections and formulas when you create them. See Defining Calculated Key Figures, Defining Restricted Key Figures, Defining Selections, and Defining Formulas.
You can change the descriptions in the properties dialog box. See Query Properties Calculated Key Figure Properties Restricted Key Figure Properties, and Selection/Formula Properties.
· Formula Variables
Formula variables represent numerical values and can be used in formulas. See Defining Formulas.
In addition, numerical values are used for selecting exceptions and conditions and you can also use formula variables here. See Defining Exceptions and Defining Conditions
You can use a formula variable for the interest rate in order to process the current interest rate, after you have executed the query or Web application.
http://help.sap.com/saphelpnw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm_ -
What are the video card requirements for running a 23" cinema display
What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XPHi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl -
What are the video/movie formats that iBooks Author uses?
What are the video/movie formats that iBooks Author uses?
strange... when I click on it it goes to the correct page:
http://support.apple.com/kb/HT5065
http://support.apple.com/kb/HT5065 -
What are the objects that support documentation?
What are the objects that support documentation?
Hi
Master data is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
If characteristics have attributes, texts, or hierarchies at their disposal then we speak of master data-bearing characteristics.
Few types of Master Data
1) The master data of a cost center contains the name, the person responsible, the relevant hierarchy area, and so on.
2) The master data of a supplier contains the name, address, and bank details.
3) The master data of a user in the SAP system contains his/her access authorizations to the system, the standard printer, start transaction, and so on.
Use
When you create a characteristic InfoObject, it is possible to assign attributes, texts, hierarchies, or a combination of this master data to the characteristic. If a characteristic bears master data, you can edit it in BW in master data maintenance.
Master data for a characteristic is uploaded into BW using an InfoSource with direct updating.
You can also update characteristics with master data flexibly. In this case the InfoObject becomes the data target or InfoProvider. However, you must explicitly declare the InfoObject in the InfoObject maintenance to be the InfoProvider.
See also InfoSources with Flexible Updating.
Learn more @
http://help.sap.com/saphelp_nw04/helpdata/EN/28/4c1738da41e57ee10000009b38f842/frameset.htm
Regards
AB -
Traffic only allowed one-way for VPN connected computers
Hello,
I currently have an ASA 5505. I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine. They just can't access the internal LAN (192.168.250.0). They can't ping the inside interface of the ASA, or any of the machines. It seems like all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN. It seems the traffic only allows one way. I have messed with ACL's with no avail. Any suggestions please?
DHCP Pool: 192.168.250.20-50 --> For LAN
VPN Pool: 192.168.250.100 and 192.168.250.101
Outside interface grabs DHCP from modem
Inside interface: 192.168.1.1
Current Running Config:
: Saved
ASA Version 8.2(5)
hostname HardmanASA
enable password ###### encrypted
passwd ####### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: endHello,
I seem to be having the same kind of issue although I cannot ping from either end.
Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
I tried running:
access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list NAT_0
but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
Any help would be much appreciated
This is a part of my config:
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network AD1
host 192.168.1.31
description AD/RADIUS
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network vpn_hosts
subnet 192.168.2.0 255.255.255.0
access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list split-acl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 ########## 1
no vpn-addr-assign aaa
no vpn-addr-assign dhcp -
What are the video effects used in this video
I was just wondering if anybody could help me. I was intrigued to find out what kind of video effect is used in this video at 0:16 - 0:18 and if theres a name for this type of video and editing used throughout the video such as the continous stream of different videos etc.
Do you mean the distorted lips or the bad tv reception.
The distorted lips can be anything from Bulge to Mesh Warp to Liquefy.
The bad TV reception can be started with the Bad TV Effects Presets that comes with AE. You can modify or edit these as you like.
I know of no specific style name that goes along with any part of this video other than lazy. It looks like nobody had an idea of what they wanted to do so they just shot a bunch of stuff and threw every effect they had in their bag of tricks at the project. Turn off the sound and it's impossible to tell what it is about. I don't mean to be critical but there's not much original here that I haven't seen a zillion times going back to the Video Toaster days. (probably before you were born). It's nothing more than a bunch of quick cuts and jitter.
Load up about 100 layers, trim them do different lengths from 5 to 30 frames, Select half of them, apply Bad TV1 to that bunch, Apply Bad TV2 to the another 10 random layers. Add tint, bulge, to a few more. set a couple of position and rotate keyframes to a few more then add wiggle to those, then use the Keyframe Assistant to sequence the layers and you'll be pretty close. It should take you about 15 minutes.
If you've got a specific question about how they made this jitter or how they made time stutter ask away. If used to tell a story these techniques are all useful. If you just want to create a jarring montage then follow my suggestion in the previous paragraph then run Brainstorm a couple of times. -
What are the digital publishing supported devices ?
can any one told me what the devices are supported the digital publishing ( mobile devices and tablet device ) with the pixel dimensions for each please ... or any one know any article or web site can tell me that info ?
If you mean phone handsets then there is no Adobe viewer for them.
The only 3 supported platforms are ipad, Android Tablet and Blackberry Playbook.
The Playbook resolution is 1024x600 like the droids.
The Iphone and iPod touch don't have a viewer. You can output to flash, if the device supports it but the lack of zoom makes it uncompelling.
If you have Device Central as part of your suite, it includes a very wide database of mobile devices and their capabilities. I'd start there. But DPS will not run on them as it stands today...
Andy -
What are the web browsers supported by BSP?
Hi all, we have a BSP application that is running smoothly in Internet Explorer. However, when we run this in Firefox, we got an error (RABAX_STATE) and when we look at ST22 dump, we got this (looks like Firefox is not supported):
Error analysis
An exception occurred. This exception is dealt with in m
. The exception, which is assinged to the class 'CX_BSP_
not caught,
which led to a runtime error.
The reason for this exception is:
<htmlb:content>: (*) This browser is not supported.
(IE>=501;NN>=620;Mozilla>=*;SAP WAS>=0;Mozilla=170)Yes you are right firefox is not supported. When you want to use firefox you need to install an agent switcher (https://addons.update.mozilla.org/extensions/moreinfo.php?application=firefox&version=1.0&os=Windows&category=Developer%20Tools&numpg=10&id=59). But be aware that not every htmlb element will work correctly with firefox. I use firefox only for development (the javascript console it so much better than the IE one).
Furthermore please take a look at this thread which has plenty of details about the browser support:
Browser compatibility -
What are the services or commands contained under ASA-management-only policy ?
If an interface is enabled of management-only policy under adaptive security appliance, what are the services comes under this would be allowed ?
Thanks Obama for replying.
Here is the comment from @jaiharidas of MSFT if anyone's interested:
@Naziq, It is better to have multiple shares under single storage account and there is no perf implications. However, please ensure that your ingress/egress and request/sec is within
the limits of a single storage account (seemsdn.microsoft.com/.../dn249410.aspx)
and use multiple storage accounts if you need to scale beyond the limits.
See the original comment on Azure Storage Team here: http://ow.ly/ChPNf
@nazik_huq -
SSAS Tabular in DirectQuery - What are the workarounds for formula limitations?
Hello,
I need to create an SSAS Tabular model against the database of a live, real-time, line of business transactional system (i.e. a CRM).
The business requirement behind it is that we need to create some complex reports against live data, and our DW is only updated daily.
This live model will however be partitioned with a time-variance limitation (e.g. only records which are XX old can be returned).
Now here is the challenge. Since I am querying live data, then I believe the model must be configured in DirectQuery model. Am I right?
The issue is that DirectQuery mode is full of formula limitations. So my concern is, if I need a calculated column or measure that I cannot make it work due to DirectQuery limitations, then what are the alternatives?
Remember that the data source is from a live system, so it is not like I can create columns and measures in the underlying relational database.
Please advise.
Regards,
P.Hi pmdci,
According to your description, you want to use some functions in calculated measure which are not supported in DirectQuery mode. Right?
In Analysis Services Tabular, since DirectQuery has the real time access and scalability, this comes with a price of restrictions on a number of DAX functions and missing Calculated Column feature. Generally the workaround for these scenarios
is replacing those functions with other functions which are supported in DirectQuery mode, or create columns in the data source. However, as you said, your environment is not possible to create columns in the database. And a lot of those limited
function are not replaceable, like time intelligence functions. So actually, there's no really effective workaround currently.
For you requirement, I suggest you submit Microsoft a feature request
at https://connect.microsoft.com/SQLServer
so that we can try to modify and expand the product features based on your needs.
Best Regards,
Simon Hou
TechNet Community Support -
Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
AyeshaThanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha -
I was wondering if anyone can help me out. I am trying to create a redundancy topology which require several connections to an ASA 5510. I am looking at extending the connections to my ASA 5510 appliance with the four port gig ethernet security module (4GE SSM). I am trying to find out what the limitations are on this particular module.
I have heard that there might be limitations to the 4GE SSM. Such as the interfaces on this module might process data separately from the ASA 5510 appliance. My question is does the ASA four port gig ethernet security module (4GE SSM) interfaces act as a extension of the ASA 5510 appliance or does it process and filter data separate from the ASA 5510 appliance ?
My concerns are that the 4GE SSM does not utilize all the security features of the ASA 5510 appliance, and that it just separates traffic into security zones. I interpret that to mean that each interface can be placed in a separate security level in which case has a separate security algorithm and uses the security level to force security policies. Nothing more.
My second question if relevant would be what are the limitations?
Thank you for your help on this topic.
mikeThe 4GE SSM just gives you the four additional ports. It doesn't increase the processing capacity of the 5510 (a relatively low end box whose replacement - the 5515X - has been out since this past spring). It works off the same configuration script and CPU as all the built-in ports.
The only limitation I can think of off the top of my head is that members of an Etherchannel cannot span the SSM and the built-in ports. -
I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?
Welcome to the Apple Community.
Only content in your iTunes library can currently be sent via AirPlay from your mac. -
What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?
centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module. However, that does not mean you can't use your FieldPoint bank without the Real Time module.
From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions.
This program runs on the PC not the FieldPoint controller. If you loose network connection to the fieldpoint, your program will loose connection to the IO. For many data logging applications this type of arrangement can work just fine. However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only.
If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
Message Edited by StevenA on 07-22-2008 04:14 PM
SteveA
CLD
FPGA/RT/PDA/TP/DSC
Attachments:
fp pallet.PNG 6 KB
Maybe you are looking for
-
Compatibility of Photoshop Elements 5 with Premiere Elements 7
I have Photoshop Elements 5 and have created an audio slideshow in it, but I was told that in order to get it to DVD that can play on things other than my PC, I'll need to get Premiere Elements. Is that right? If so, would I be able to buy just Premi
-
ITunes 7.3 & Error -50..Help Me Please!!
Well yesterday I downloaded a football game with no problem at all. Today I tried downloading another one and I get error -.50. It says check connection and retry. Ive done it numerous times and nothing works. I am running the newest version of iTune
-
Can someone explain how to burn files onto a blank DVD, please? I have iMac with Lion and DVD-RW. When I insert the DVD, no icon appears on my desktop. If I go into the disk utility, the disk shows up there. Then I click BURN, and a window opens
-
How to use Aperture 3 Photo to make a card in iPhoto?
I have been using Aperture 3 exclusively for a couple of years and now I would like to create some cards in the iPhoto Letterpress process using some of these photos. Some would be blank to write a message to family & friends, some Holiday designed c
-
APPHANGB1 when browsing the web, or just keeping it open. Happens once in a 5 minutes, and it freezes for 30 seconds. I found many people who have this problem too ....