What are the limits of available space for a document on Pages?

Hi, I use Microsoft Office Word and I have a problem.
I have a Word file of 48,000 pages, but I do not support, around 30 to 32,000 pages literally mad.
Apparently more than 32 MB, which is the limit of width of document writing with Word.
Let me know if Pages, the Apple Macintosh writing program, has the same limit of 32 MB or even larger documents can support, because then switch to that.
Thanks.

Microsoft Word will easily work on documents larger than 48,000 pages (you can create documents of poractically unlimited size). It's best not to exceed 2,000 pages in a single file: although you can go to 5,500 or so if you have a sufficiently powerful computer. The old "32 MB" limit no longer applies: that was a limitation of the file system way back, and applied only to the "text" portion of the file, not the graphics. On 64-bit OS X or Windows you can go way above that if your disk is fast enough.
However, as mentioned by the other poster, it really isn't a good idea to allow a document to get that large. Research proves that the ability of someone to use a document deteriorates rapidly when it passes 250 pages, so at that point, you should be looking to redesign your publication.
It is also true that a 48,000-page document represents 96 man-years of effort, well over ten million dollars of investment. When you have that much investment at risk, it is essential to have at least one highly-skilled Documentation Engineer on the project, because the difficulty of creating such a document rises quite sharply with size and complexity.
Microsoft Word will do documents this size, and so will Adobe FrameMaker. Each of them requires high skills to use effectively on such large projects.
If you care to hop on over to here:
http://www.officeformac.com/ProductForums/Word/
We will be happy to show you how to do this in Word.
Cheers
John McGhie
Microsoft MVP [Word and Word:Mac]

Similar Messages

What are the limitation of the 4 Port Gigabit ethernet Security Service Module (4GE SSM)?

I was wondering if anyone can help me out. I am trying to create a redundancy topology which require several connections to an ASA 5510. I am looking at extending the connections to my ASA 5510 appliance with the four port gig ethernet security module (4GE SSM). I am trying to find out what the limitations are on this particular module.
I have heard that there might be limitations to the 4GE SSM. Such as the interfaces on this module might process data separately from the ASA 5510 appliance. My question is does the ASA four port gig ethernet security module (4GE SSM) interfaces act as a extension of the ASA 5510 appliance or does it process and filter data separate from the ASA 5510 appliance ?
My concerns are that the 4GE SSM does not utilize all the security features of the ASA 5510 appliance, and that it just separates traffic into security zones. I interpret that to mean that each interface can be placed in a separate security level in which case has a separate security algorithm and uses the security level to force security policies. Nothing more.
My second question if relevant would be what are the limitations?
Thank you for your help on this topic.
mike

The 4GE SSM just gives you the four additional ports. It doesn't increase the processing capacity of the 5510 (a relatively low end box whose replacement - the 5515X - has been out since this past spring). It works off the same configuration script and CPU as all the built-in ports.
The only limitation I can think of off the top of my head is that members of an Etherchannel cannot span the SSM and the built-in ports.

What are the different values available for type attribute

Hi,
    I am working with IDOC to Stored Procedure. For each field we need to give the values for 'isInput' and 'type' attributes. I need to pass values for 'datetime' and 'numeric' fields. What are the list of values availabIe for 'type' attribute. I know only about 'CHAR' attribute.
     Can anybody please tell me what all the values availabe for attribute 'type'. I am facing this problem while giving the value for type attribute.
Thanks in Advance,
Murthy.

Does this help
tring
    Data that contains a combination of letters, numbers, and special characters. String data types are listed below:
CHARACTER: Fixed-length character strings. The common short name for this data type is CHAR.
VARCHAR: Varying-length character strings.
CLOB: Varying-length character large object strings, typically used when a character string might exceed the limits of the VARCHAR data type.
GRAPHIC: Fixed-length graphic strings that contain double-byte characters.
VARGRAPHIC: Varying-length graphic strings that contain double-byte characters.
DBCLOB: Varying-length strings of double-byte characters in a large object.
|BINARY: A sequence of bytes that is not associated with a |code page.
|VARBINARY: Varying-length binary strings.
BLOB: Varying-length binary strings in a large object.
|XML: Varying-length string that is an internal representation |of XML.
Numeric
    Data that contains digits. Numeric data types are listed below:
SMALLINT: for small integers.
|INTEGER: for large integers.
|BIGINT: for bigger values.
DECIMAL(p,s) or NUMERIC(p,s), where p is precision and s is scale: for packed decimal numbers with precision p and scale s. Precision is the total number of digits, and scale is the number of digits to the right of the decimal point.
|DECFLOAT: for decimal floating-point numbers.
REAL: for single-precision floating-point numbers.
DOUBLE: for double-precision floating-point numbers.
Datetime
    Data values that represent dates, times, or timestamps. Datetime data types are listed below:
DATE: Dates with a three-part value that represents a year, month, and day.
TIME: Times with a three-part value that represents a time of day in hours, minutes, and seconds.
TIMESTAMP: Timestamps with a seven-part value that represents a date and time by year, month, day, hour, minute, second, and microsecond.
Regards
Ravi

What are the standard Solutions available for Complaints Management in CRM?

Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.

You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin

For Delivery Performance what are the standard report available n SAP?

For Delivery Performance what are the standard report available n SAP?

hi
If you wanna know the SD report just go to SAP1 transaction code from easy access( it works only from easy access) and you will find entire reports available in SAP. Then select what is relevant to you. And as you asked any material on reports, so I have some good material on it and will surely send you tonight.
And Some of the Standard reports in SD are given below check it out for convenient however always better to chek above told transaction code:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
These are all main standard reports as well I am again repeating that it's better to check all reports from above said transaction code.

What are the ODM components available in SNC?

Hi experts,
Could you please explain on
1. what are the ODM components available with SNC an their use?
2. Settings that required to activate/generate/regenerate ODM?
Thanks in advance and eagerly looking for your great words.
Regards
Vinoth

Hi Rohan
The following are the order components available with SNC
1HDR,1KNB,1NOT,1PAC,1PRA,1PRC,1PRT,1SCN 1SUB 1PRT 1SCN 1SUB 1TST 2IT2 2IT3 2NOT 2PRA 4NOT 4SDL 4TST 7MP1 7MP2 7MP3 7REF 7RQT BWHG BWIG BWLG DLH1 DLI1 DLI2 DLI3 DLI4 DLI5 DLI6 DLI8 DRIT DRSL FTD1 FTDH FTU1 FTUH HEXC HHU1 HHU2 HHU3 HHU4 HMSG HPRT HSTT HTRA ICAR IEXC IPRD ISTO ISTT IVH1 IVI1 IVI2 KNBR OECN OECP OEHD OEIL OEIR
OEIT OESL PIHD PIND PIOR RWAA RWAT RWCG RWCP RWDS RWFA RWGN RWHN RWIB RWIN RWIR RWIV RWLC RWNS RWOH RWOI RWOP RWP1 RWP2 RWPA RWPG RWPH RWPN RWPP RWPR RWPV RWPW RWRC RWRS RWSN RWTS SCNR
TLBH
Depending on the data you exchange between the two systems, you need to activate the necessary components.
These components form the basic framework where the data in your order document gets stored in the respective components
For example:A double-level order document, use the components 1HDR (header) and 2IT2 (item). For a triple-level order document, use 1HDR (header), 2IT3 (item) and 4SDL (schedule line).
As mentioned by Nikhil and Sandeep, the above notes help you, in activating the necessary ODM's
Kindly read the help document available is SAP IMG for further understanding.
Best Regards
Vinod

What are the user exits available related to Credit Management?

What are the user exits available related to Credit Management?
I have blocked users from releasing SO through Tciode VKM3 , now I want to block
the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.
Thanx in advance,
Regrds,
Binayak

Hi,
User Exits For Credit Checks And Risk Management
Credit Check
If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
LVKMPTZZ
LVKMPFZ1: USER_CREDIT_CHECK1
LVKMPFZ2: USER_CREDIT_CHECK2
LVKMPFZ3: USER_CREDIT_CHECK3
User exit for availability check
User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
Risk Management for Receivables
RVKMPUS2
Using this user exit, you can define new forms of payment guarantee.
Regards,
Amrish Purohit

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the limitations in terms of data size or performance while using csv or text file as datasource?

Also what are the limitations in terms of data size or performance related issues while using csv or text file?Is it the best practice to use csv , text file to use as a datasource to improve performance?Please Advice....  

Hi,Create Same Data Input for CSV and Text File ,Create 2 different reports one for CSV and One for Text ,run them one you have done that.Go to Report Menu and Select Performance Information .Use the Data in that to check which one is good datasource to improve performanceCheersRahul

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications?

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?

centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module. However, that does not mean you can't use your FieldPoint bank without the Real Time module.
From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions.
This program runs on the PC not the FieldPoint controller. If you loose network connection to the fieldpoint, your program will loose connection to the IO. For many data logging applications this type of arrangement can work just fine. However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only.
If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
Message Edited by StevenA on 07-22-2008 04:14 PM
SteveA
CLD
FPGA/RT/PDA/TP/DSC
Attachments:
fp pallet.PNG ‏6 KB

What are the limitations of the free 30-day InDesign trial?

What are the limitations of the free 30-day InDesign trial?

There are no limitations for 30 days, it will work exactly as if you have a subscription. But if you don't get a subscription, after 30 days, you will no longer be able to launch the program.

What are the limitations of remote API?

Excuse me,
I am new to Oracle BPEL, and going to customize the worklist application using remote API.
I read the Sample Worklist Application for learning the remote API.
When I learning about task attachment's API,
I saw a thread
RemoteWorklistServiceClient -- attachment
Suddenly, I found that there is different between local and remote API.
Would anyone like to tell me what are the limitations of remote API?
By the way, could there is any API for retrieve process list?
The reason is I am trying combine some feature of the console into my worklist application
such as list process with details, deploy/undeploy process, active/retired process lifecycle and turn on/off process state.
I only found how to start process:
Locator lLocator = new Locator({Domain}, {Domain.Password}, {Properties});
IDeliveryService lDeliveryService = (IDeliveryService) lLocator.lookupService(IDeliveryService.SERVICE_NAME);
lDeliveryService.request({ProcessName}, {OperationName}, {NormalizedMessage});
Thank you very much ^^
Roy

Excuse me,
I got the answer by testing the remote API
And I have another question about the BPEL API which used in the console
I have success construct the class com.oracle.bpel.client.Locator
It providing a set of methods for invoking Oracle BPEL
However, the methods always using WhereCondition as parameter
therefore, I need to know about the database.
1. Could anyone tell me where can I found the database schema?
2. There are some deprecated APIs what is the preferred APIs of them?
- IDeliveryService.SERVICE_NAME
- IDeliveryService.request({Process}, {Operation}, {NormalizedMessage})
- IDeliveryService.post({Process}, {Operation}, {NormalizedMessage})
Thank you very much ^^
Roy

What are the limitations of ODI?

ODI is an E-L-T tool of its first kind and has good performance when copared to ETL because of its architecture.
BUt what are the limitations of ODI?
And What are the strong points to recommand ODI to the clients?

what are the limitations of ODI ::
(i) it won't support multi target We cant say it wont support. We can achieve this using IKM mTI or using some logic in a single interface. But directly you can't drag multiple table into interface (target canvas)
(ii) Interfaces are depending on KM so to implement any new logic we need to know about Jython Not exactly. But yes if you know jython it is more helpful for this. Discussed
http://www.linkedin.com/groups/How-was-ODTUG-Ask-Experts-140609.S.197740849?view=&gid=140609&type=member&item=197740849

What are the Limitations of EBP-SUS?

HI SRM Gurus,
What are the limitations of EBP-SUS?
1. Classic Scenario.
2. Extended Classic Scenario.
Is ASN possible with EBP-SUS extended classic scenario.
Version 5.0
Server 5.5
Thanks
Rams

Hi please refer to the OSS note with number 543544 for details
award points if usefull

What are the limitations of apex 3.2.1

Hello All,
what are the limitations of apex 3.2.1
thanks/kumar

Hi Kumar,
as Tony already pointed out, there are no hard limitations for Oracle APEX.
As APEX runs in the database you can do whatever your Database can do (call Packages, use Analytic Functions, even call Java in the Database, create complex Queries with literally limitless joins).
The Output of APEX is HTML and can be influenced by your templates and your code, so again you are only limited by your imagination. Add a different CSS and your Layout looks different. Add some JavaScript Code and your Forms behave different, are more interactive and so on.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at

What are the limits of available space for a document on Pages?

Similar Messages

Maybe you are looking for