What are the master loads in Fi/Co

Hi to every one
I was assigned by one work, which is i have to work the idenatification of master datas in Fi/Co. After that our technical people will migrate the data using BDC. So i identified few master datas in Fi/Co. those are 1. GL master 2. House Banks
3. Currencies 4. Cost elements 5. Cost Centers
Please guide me if i miss any thing.

Hi Sateesh,
The following are the master data in FI
1. GL Master
2. Vendor Master
3. Customer Master
4. Bank Master
5. House Bank & Account Ids
The following are the master data in CO
1. Cost Element - Primary & Secondary
2. Cost Centers & Standard hierarchy
3. Internal Orders
4. Profit Centers & Profit Center standard hierarchy
5. Activity Types
6. Statistical Key figures
7. WBS elements, etc
Currencies are not master data.
Hope this helps
Cheers,
Som

Similar Messages

What are the master Data in SAP SD

Hi All,
I have a question. Even though its a naive question please bear with me.
what are the master data in SAP SD.
These are the one's i know.
1) Customer Master Data
2) Material Master Data
But what i want to know is does the following ones come under master data?
1) Price master data
2) Transporters master data(we are using transportation management)
3) Route master data
4) Customer material info records
5) Credit master data(iam using credit management)
What will be the master data for Transportation management(module), CIN(country India version), credit management & rebate processing
Thanks for your valuable time & knowledge.
Regards,
Pavan

Hi Pavan,
 Just to add some more valuable information.
Organisational master data : Every company is structured in a certain way. In order to work with the SAP System your company structure has to be represented in the system. This is done with the help of various organizational structures.
Condition master data : In sales and distribution, products are sold or sent to business partners or services are performed for them. Data about the products and services as well as about the business partners is the basis for sales processing. Sales processing with the SAP R/3 System requires that the master data has been stored in the system.
Material master data : In addition to sales and distribution, other departments of the company such as accounting or materials management access the master data. The material master data is stored in a specific structure in order to allow access from these different views.
Document master data : The processing of business transactions in sales and distribution is based on the master data. In the SAP R/3 System, business transaction are stored in the form of documents. These sales and distribution documents are structured according to certain criteria so that all necessary information in the document is stored in a systematic way.
Customer Master Data : or for that matter various business partners, we maintain data for them also called as the customer master data or vendor master data like that.
Thanks & Regards
Sadhu Kishore

What are the master data tables for 'Plant'?

Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!

Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
        name1 TYPE t001w-name1, "PLANT DESCRIPTION
        adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
         str_suppl1 TYPE adrc-str_suppl1, "STREET2
         str_suppl2 TYPE adrc-str_suppl2, "STREET3
         street TYPE adrc-street,          "STREET
         city1 TYPE adrc-city1,            "CITY
         post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
         post_code2 TYPE adrc-post_code2, "PO Box postal code
         tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
         fax_number TYPE adrc-fax_number, "FAX NUMBER
         str_suppl3 TYPE adrc-str_suppl3, "STREET4
         location TYPE adrc-location,      "STREET5
         city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                          j_1icstno TYPE j_1imocomp-j_1icstno,
                          j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana

What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
can give the information about the below questions
whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
and what are the better load/performance tools available for Flex Remote Objects?

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

What are the Master data that should be uploaded for Go live

Can any one tell me what are the SD master data that should be uploaded during GO live

Hi Prem,
SD Master data includes:
- Customer Master data
- Material Master data
- Customer-Material Info records
- Enterprise Structure info (Dist Channels,Divisions etc)
- Condition Master Data in Pricing.
I believe, all these need to be uploaded during GO Live.
regards,
Raj

What are the Master Table validations required for below fields

Hi,
I have created a selection screen with following fields.
Can anybody tell me what are the exact master table vaidation i can do for the same!
Order Type[VBAK-AUART],
Order Number[VBAK-VBELN],
Customer PO #[VBKD-BSTKD],
Sold-to Party No[VBPA-PARVW - SP as key],
Ship-to Party No[VBPA-PARVW - SH as key],
Division[VBAK-SPART].
Agaist which master tables i need to vaidate above fields!
Also please clarify what is meant by [SP as Key] & [SH as key]! Is it needs to be defaulted!
Thanks in advance.
Thanks,
Prasad.

Hi Prasad,
For your another Query
SH- Ship To Party,
SP - Sold To party.
You can set anyone of them as Default depending on ur Bsuiness requirement ie. You are Forwarding ur Invoice to ship to or sold to Party.
Regards,
Leo

What are the master tables of transaction MB56

Hi Team ,
Please help me to get the master tables of transaction MB56
Thanks & Regards,
Samantula

Hello,
Some of the Master tables are,
MARA,
MARC,
T001W,
MCHA,
MCH1.
Hope this helps,
Regards,

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

What are the steps would liket take using AR,AP,GL Datasource in R/3

Hi,
When i would like to use SAP content data source Like ,AR,AP,GL
data source what are all the master data need to activate for this.
Ex: for AR we need to activate the Customer master data
what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.
Find out what Cubes, ODS's will be used - > HELP.SAP using the datasource.
Activate transaction datasources.
See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
Install content on BI side.
It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.
Infosource Overview

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the frequent data load errors in production support?

what are the frequent data load errors in production support?

It is a long list. Here is some of them.
1. Idoc not arriving from source system.
2. previous processes failed.
3. change run unsucessful or did not run properly and data in master data is messed up.
4. invalid characteristics in the data.
5. Duplicate records found.
and on and on.
Ravi Thotahdri

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

What are the master loads in Fi/Co

Similar Messages

Maybe you are looking for