What are the maximum no of wad reports in a project

Hi all,
what are the maximum no of wad reports in a project.
can you suggest how many people will work on wad reports  either one or more than one.
can you provide me example scenerio.
thanks,
cheta.

Hi ,
The number of WAD Reports depends on your Reporting requirement.
You can either have one WAD for one Report each. or you can also have more than one report in a single WAD.
Could you please be more specific in what exactly your requirement is???

Similar Messages

  • What are the maximum numbers of parameters that a subvi can be obtained?

    What are the maximum numbers of parameters that a subvi can be obtained?

    I'm not sure I understand exactly what you mean. Do you mean to ask how many parameters you can pass to a subVI? That would be a very large number because a connector pane can have a dozen or so terminals--and if each terminal is a cluster... You could pass a very large number indeed.
    Having said that however, you probibly wouldn't want to. Remember the more parameters you're passing the more tightly coupled your code is--and the less reusable the code will probibly be.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • What are the external events of a report?

    Hi,
    Please tell me if you have any idea about what are the external events of a Report?
    Thanks in advance.
    MD.

    Hi,
       When you run an executable program, the program flow is controlled by the external events in the ABAP runtime environment. The following diagram shows the sequence of the events:
    check this link for more....
    http://help.sap.com/saphelp_nw70/helpdata/en/9f/db99fa35c111d1829f0000e829fbfe/content.htm
    Regards,
    Shanthi.P
    Reward points if useful ***

  • Wiki or Robohelp - What are the benefits of using a wiki vs publishing projects in robohelp?

    What are the benefits of using a wiki vs publishing projects in robohelp? I currently use RH9/RH9 Server and  publish multiple SSL.  The company is looking to stop using Robohelp and replace our online help authoring tool  (RH) with a wiki. Are there any benefits of going to a wiki environment.  What RH features/functions that I have today will i not have by having IT import our robohelp files into a wiki?
    I know that a wiki is not an authoring tool, but someone must think it is and we'll still have all the functionality of publishing multiple SSLs, reports, etc once in the wiki environment.  Any comments - is this the best route?

    Hi,
    There are many differences. The idea of a wiki is to allow anyone to view and/or edit the content. Depending on the wiki system, you can set access control for viewing and editing.
    Wiki's typically have simple syntax (html in a wiki is a serious security risk), allow image embedding, links and attachments. You will need to learn the specific syntax (rather easy, but also very limited).
    What will you lose? This depends on the features available in the wiki system as well as the available plugins. A few downsides:
    - WYSIWYG editor limited, if at all.
    - No snippets
    - No variables
    - Dropdowns (may be possible through plugins)
    - Index
    - Styling based on css classes (mostly supported through HTML which is a security concern)
    - Only one version of your support system: multiple versions require multiple installations/configurations.
    - No searching in attachments.
    - No CBT (Though some wiki's allow comments in the wiki code)
    - No Word/FrameMaker import.
    - You have to create your own CSH calls.
    On the upside:
    - Most wiki systems are free, even for commercial use.
    - The syntax is quite simple, allowing you to quickly write text.
    - Wiki's typically offer good support for syntax highlighting.
    - They are very easy to set up.
    - Most wiki's have plugins to enable comments.
    The greatest downside in my opinion is that you always have the latest version of all files. Whenever you update a page, everyone immediately has the latest version. And if you want to create help for a feature that isn't released yet, you will have to use access control to make sure not everyone sees the (unfinished) help for the unreleased feature. With RoboHelp you have a single source that creates a one way output.
    We use both RoboHelp and wiki's: RoboHelp for customer help and wiki internally to share knowledge. And sharing knowledge is what wiki's are designed for.
    Greet,
    Willam

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • What are the different tools(software) we  used in support projects and avi

    hi,
    What are the different tools(software) we  used in support projects(sap) and aviailable in market??/
    Thanks,
    bajee

    Hey Bajee,
    I believe you are talking about Ticketing tool used for AMS ( Application Management Support )....
    There are several tools available for this by several vendors....
    They are Magic Service desk, HP open view, BMC remedy, Peregrine help desk, SAP Solution Manager can also be used as support desk tool...
    I hope that what you asked for and if its not then please clarify your questions !!
    Inspire ppl by rewarding !!
    Regards,
    Anand

  • What are the tables used for this Report

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.
    9994262112.

    hi
    good
    try with these tables,
    MARA
    KNA1
    thanks
    mrutyun^

  • What are the maximum temperatures for my MacBook Pro?

    I have this MacBook Pro (3,1). I know there are maximum temperatures at which the system will shut itself down in order to prevent damage. I know this because I have seen it happen a couple of times
    When I run Windows, apparently the OS doesn't care to throttle power in order to reduce dangerous heat like Mac OS X does. I now have a program that monitors CPU and GPU heat when I run Windows 7, and it will sound an alarm if they reach a pre-set ceiling.
    My question is, how do I know what the emergency shutdown temperature is so I can set the alarm limit appropriately (low enough to trigger before catastrophe, but high enough that it doesn't trigger when things are still okay)?
    This page from Intel seems to be telling me that the CPU should not go above 100°C ...does that seem like the number I'm looking for?
    Nvidia doesn't seem to say anything about temperatures on the product page. User forums seem only to speculate on what is or isn't safe with no real specifications to back them up.
    How can I find these numbers, either from Intel & Nvidia, or from Apple? Or, is there a general ceiling that I can go by to make sure my alarm warns me before an emergency shutdown?

    Amazon Best Sellers: Best Mac Game Controllers
    What's the best/most compatible game controller for Mac ...
    [OS X] Best Gamepad for Mac? - MacRumors Forums
    Ask Engadget: best Mac gamepad?

  • What are the valid 'sources' for Fin Reports 11.1.2?

    Hi,
    Have a client that wants to report using Fin Reports 11.1.2. He wants to connect to a Oracle Schema or SQL Server data warehouse and then connect to Essbase/Planning cube and also to the Planning relational tables to report on supporting detail etc. I don't think FR can connect to a relational source other than HFM and/or Planning Detail. Is that correct? Or can it connect to any Oracle/SQL server database and report off that too. I thought Interactive Reporting (Brio) is the tool for that.
    Please advise.

    Hi,
    Here is the whole list: http://download.oracle.com/docs/cd/E12825_01/epm.111/bpmui_user/database_manager_fr.html
    Cheers,
    Mehmet

  • What are the best practices for audit report for SharePoint 2013 farm ?

    Hello,
    I am looking for the best practices for audit reporting in SharePoint 2013 farm.Can anyone please provide me checklist/tools/guidelines on same ?
    your help will be much appreciated.
    Thanks and Regards,
    Dipti Chhatrapati

    This is quite open ended question. A sharepoint farm should be well maintained as per :
    1. Microsoft's recommendations on : Topology, Hardware and Software requirements, Operational procedures and most important Capacity guidelines:
    http://technet.microsoft.com/en-us/library/ff758645(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
    2. Organisation's IT policies and procedures : Farm Configuration, Workload and monitoring
    http://technet.microsoft.com/en-us/library/ff758658(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ee748651(v=office.15).aspx
    3. Industry best practices
    I would suggest to start thinking over these lines and create a plan for your Sharepoint farm.
    You can then create powershell scripts to run these reports at certain frequency to find the changes, any deviation from the standard and health of the entire farm.
    Hope this helps!!
    I LOVE MS..... Thanks and Regards, Kshitiz (Posting is provided "AS IS" with no warranties, and confers no rights.)

  • What are the maximum sustainable streaming rates to USRP RIO

    Hi,
    I am using a USRP-2942R.  Using one of the example VIs (host based), we created a VI which would record 2 or 4 channels simultaneously to a data file (we use two such devices for the 4 channel capture).  We would like to do this continuously for as long as possible.  By recording to our Solid State Drive, we can achieve rates of about 20MS/s per channel when capturing two channels or 10 MS/s per channel when capturing 4 channels.  However, we cannot seem to go much above this rate. Even if we setup a RAM drive for the file, we still have issues above 20 MS/s for two channels.  So, it does not seem that the file writing is the bottleneck.
    I am wondering if there is any example code for doing this exact function.  Perhaps we have done something wrong in modifying the example we had.  Do you know what sample rates we should expect to achive when recording to a RAM file.  By comparison, if I run these same USRPs on this same PC but using the Ettus UHD software under Linux Ubuntu 14.04, I can achieve 100MS/s per channel on two channels when recording to a RAM file.
    Thanks.
    Rob Kossler

    As a quick aside:
    PCIe gen 1 is 250 MB/s per lane. The USRP RIO supports PCIe gen 1 x4, for 1 GB/s, but that 'G' is 1000, and not 1024. So in terms of bytes, it ends up being ~953 MB/s. Next, we have to remove some of the throughput for packet overhead and lastly the read response packet size. The larger the read response packet, the less packet overhead incurred. In the end, the USRP RIO can stream about 832 MB/s to the host. 800 MB/s is a nice, round number though.
    Each channel has an 16-bit I and Q portion, and there are two channels. Setting the IQ rate (sample rate) to 120 MS/s results in 120 MS/s * 2 channels * 4 bytes/channel = 960 MB/s, which exceeds the total throughput of the PCIe bus. It is impossible to continuously stream both channels at 120 MS/s back to the host. However, lowering the sample rate to 100 MS/s results in 800 MB/s. Or, if you use just one channel, you'll be at 480 MB/s.
    That takes care of the throughput, but there are additional issues. There are other things on the PCIe bus, and so bus hiccups may occur and the memory controller may not service the read requests from the device fast enough. If data is not pulled out of the USRP's FIFOs fast enough, the FIFOs will fill up. You can increase the size of the FPGA's DMA FIFOs in the target's settings in the project. A larger DMA FIFO will make the USRP more resilient to these hiccups.
    Next, after the data is transfered from the USRP to the host PC's memory, the host PC has to do something with it. If you have complex math or graphs, the rate at which the host PC can pull data from its FIFO may be too slow. If the host's FIFO fills up, then no more data from the FPGA can be transferred. So, you can (1) increase the host's DMA FIFO buffer depth, or two, increase the rate at which the host pulls data from its FIFO (i.e. reduce CPU computation).
    There are additional tweaks, such as using Zero Copy DMA, too, which can yield large improvements to streaming performance.
    So, in conclusion, high throughput streaming is hard, but it's possible. The Sample Project has to cover a wide range of use-cases and care-abouts, so it cannot perfectly solve every problem. But, it can stream at full rate. By default, the FPGA's FIFOs' buffers are around 1000 elements. If you set the sample size to less than 1000, and set the sample rate to 120 MS/s, and do bursty/finite streaming, you will be able to stream at full rate. Your data will not be contiguous though. To do continuous streaming, you'll need to look into the above suggestions.
    Hope this helps!
     

  • What are the possiblities to create BO report on SAP Tables

    Hi All,
    Can any one please sugegst me the possiblities to create a BO report WEBI/Crystal on SAP ECC Tables .
    Thanks
    Bin.

    Hi Ingo,
    I really want to activate Transient Provider. I have ECC 6.0 EHP5 and BO 4.0 but when I try to activate transient provider I receive a dump error.
    When I the report rsrts_activate_r3is, I put the current mandant on the selection screen.
    Details:
    Error: UNCAUGHT_EXCEPTION
    Excep: CX_RSR_X_MESSAGE
    Program ABAP: CL_RSDM_READ_MASTER_DATA======CP
    Application Component: BW-WHM-MTD
    We put a OSS message  but we don´t have answer yet.
    I really appreciate your help in these case.
    Best regards,
    Gustavo

  • What are the best export settings for1280 x 720 HD project to SD DVD

    I just completed a FCP Studio project that is 1280x720p it will be burned to a SD DVD . My question is what would be the best settings to use in Compressor to  export this project so it could be viewed 16x9 on a SD DVD? Do I send it to Compressor from FCP Studio or should I export a QuickTime File using the current setting and then bring it into Compressor?

    Export a self contained file. Bring that into Compressor...use the BEST QUALITY DVD presets.  And in DVD SP, in the inspector have it set for 16:9 and Letterbox.  This way the DVD player will detect if it's feeding an HD monitoror SD TV and display it appropriately

  • What are the Different Reporting Types Offer By SAP Package

    Hello everyone...
    Been on SAP almost a year and finding there is alot to learn.
    Question: What are the different ways to generate reports and to link reports\programs across the SAP system. I know about BW, RRI, ABAP language, CRYSTAL.
    Are there any more ?
    Thank you in advance....
    Jim

    there are four reporting possibilities using business explorer in bw:
    bex analyser:
    (reports displayed in normal excell)
    web application:
    (publishing above reports in web)
    formated reporting:
    (crystal reports)
    mobile intelligence:
    (view reports in mobiles)
    hope it helps

  • What are the list of .stock by storage location

    hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.

    Dear Radha Krishna,
    You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
    Go through standard Reports:
    MMBE Stock Overview
    MB52 List of Warehouse Stocks on Hand
    MB53 Display Plant Stock Availability
    MB54 Consignment Stocks
    MB5B Stocks for Posting Date
    MB5K Stock Consistency Check
    MB5L List of Stock Values: Balances
    MB5T Stock in transit CC
    MB5W List of Stock Values
    MBBS Display valuated special stock
    MBLB Stocks at Subcontractor
    MBSF Release Blocked Stock via Mat. Doc.
    MBW1 Special stocks via WWW
    MC.1 INVCO: Plant Anal. Selection: Stock
    MC.5 INVCO: SLoc Anal. Selection, Stock
    MC.9 INVCO: Material Anal.Selection,Stock
    MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
    MC.H INVCO: Business Area Anal.Sel. Stock
    MC.L INVCO: Mat.Group Analysis Sel. Stock
    MC.P INVCO: Division Analysis Sel. Stock
    MC.T INVCO: Mat.Type Anal.Selection Stock
    MC48 INVCO: Anal. of Current Stock Values
    MC49 INVCO: Mean Stock Values
    MC50 INVCO: Analysis of Dead Stock
    MC8M Read Opening Stocks
    MCB) INVCO: Long-Term Stock Selection
    MCC4 Set Up INVCO Info Structs.from Stock
    MCH: RIS: STRPS/Mvmts + Stock - Selection
    MCKJ Selection version tree: Stock
    MCKR User-spec. sel. vers. tree: Stock
    MCNB BW: Initialize Stock Balances
    MCSK Call Standard Analyses of Stocks
    MD04 Display Stock/Requirements Situation
    ME27 Create Stock Transport Order
    ME2O SC Stock Monitoring (Vendor)
    MF65 Stock Transfer for Reservation
    MI35 Batch Input: Post Zero Stock Balance
    MIQ1 Batch Input: PhInvDoc. Project Stock
    MM73 Special Stocks: Preparation
    MM74 Archive Special Stocks
    MM75 Display Archive of Special Stocks
    MMBE_OLD Stock Overview
    MMN1 Create Non-Stock Material &
    MS04 Planning Scenario: Stock/Reqmts List
    MS29 Calculate Sim. Initial Stock
    Tables:
    MKPF Header: Material Document
    MSEG Document Segment: Material
    IKPF Header: Physical Inventory Document
    ISEG Physical Inventory Document Items
    SBSE Stock Mngmt Levels for Inventory Sampling
    SKPF Header Data: Inventory Sampling
    SLGH Elements of Stock Population
    SSCH Strata of Inventory Sampling
    T156 Movement Type
    MSKA Sales Order Stock
    MSKAH Sales Order Stock: History
    MSKU Special Stocks with Customer
    MSKUH Special Stocks at Customer: History
    MSLB Special Stocks with Vendor
    MSLBH Special Stocks at Vendor: History
    MSPR Project Stock
    MSPRH Project Stock: History
    MSSAH Total Sales Order Stocks: History
    MSSL Total Special Stocks with Vendor
    MSSQ Project Stock Total
    MSSQH Total Project Stocks: History
    http://goldenink.com/abap/files_in_sap.html
    http://www.erpgenie.com/abap/tables.htm
    Regards,
    Naveen.

Maybe you are looking for