What are the 'must know' CO settings/procedures?

Hello
What are the most important CO settings/procedures every consultant must know?
I am new to CO and just to be sure that course content includes all main points.
Thanks

There are no 'main' points; it all depends on the business requirements.
The more you know, better it would be.
The specified item was not found.

Similar Messages

  • What are the best imovie, mpeg4 settings for making dvds?

    What are the best imovie, mpeg4 settings for making dvds?

    • iMovie'08 to 11
    - Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
    iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
    iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
    • DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
    • iDVD does only care about TIME / Duration as
    iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    • iDVD Does Region = Zero (to be played everywhere)
    • Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
    If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
    One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
    I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
    • NTSC - US etc
    • PAL - EU etc
    Yours Bengt W

  • What are the must have apps for Snow Leopard

    Just downgraded from Mavericks to Snow Leopard 10.6.8. Just can't stand the frequent beach balls. Was wondering what are the must have apps that are still being updated by the developers?

    Most of the apps that comes with OSX 10.6 are not being updated anymore. It would be great if you could recommend apps that are still being updated for security, stability etc for the following:
    1. Email
    2. Browsing
    3. Office Suite (like iWork)
    4. To do List
    5. Photo Editor
    6. P2P / File Sharing
    I am aware that there are reviews in the net for best apps, but I am interested to learn what people in this community have used personally and suggest.
    Cheers

  • What are the must-have accessories?

    What are the must-have accessories ?

    Backup drives for your valuable data so if your MBP fails you will have not lose everything.  Two backups are better than one.  All HDDs will eventually fail.
    Ciao.

  • What are the code library function settings should be followed

    i have written one win32 dll, in that what are the project settings should i follow to access the dll file from the lab view..
    i have done the following changes but still its not working,
    1. Added the library.lib to the dll from the installed path of lab view
    2. project settings > settings for All configuration
    >C\C++ : category :code generation
    use run time lib : Multi threaded dll
    processor : blend
    struct member allignment :1 byte
    call convention : _cdecl*
    For my driver access i have included the sys file.
    is that anything i have to do other than this,  please tel me the config i hav do for the access

    2716jag,
    How are you trying to access the DLL from LabVIEW?  Have you tried using the Call Library Function Node?  This should allow you to access the functions within the DLL.  I hope this helps!
    Brian T
    Applications Engineer

  • What are the important conditions in taxinn procedure

    hi all
    please tell what are the important condition types which capture excise and other taxes in taxinn procedure for a manufacturing company?
    and also the procedure to be used for sales from depot and relevant excise conditions?
    thanks a lot

    hi all
    please tell what are the important condition types which capture excise and other taxes in taxinn procedure for a manufacturing company?
    and also the procedure to be used for sales from depot and relevant excise conditions?
    thanks a lot

  • What are the must have SAP componets req to publish MDM 7.1.03.86 on web

    Can anyone explain to me what are the SAP components required for MDM 7.1.03.86 allowing me create a webpage front end to MDM 7.1 and create and publish my own screens?
    Like many I am very new to the world of SAP.
    There are many others in my own company with a vast knowledge of what are all the pieces needed to run almost anything
    In SAP. One of the exceptions to this rule is SAP Master Data Management (MDM).
    We run:
    - SAP MDM version 7.1.03.86
    - A Windows 2003 server
    - Oracle 10.X.
    - 7.1 Import Manager
    - 7.1 Import Server
    - 7.1 Data Manager
    - 7.1 Syndication Server
    - I see reference to the 7.1 MDM Publishers but I donu2019t see the API in the way I have software loaded right now.
    I would like to get to the point where I can create a web portal front end to the MDM product.
    My problem is I canu2019t get anyone to give me a an answer as to what are the other pieced of software I would need to get
    In an end to end solution. Starting with barebones and working up to the works!
    Here is what I would like to be able to do:
    - Publish in a SAP Portal screens to the web. (SAP NetWeaver CE Portal, PI Portal ????)
    - Write code in Java, SQL, VB and more, save and test them. (SAP NetWeaver WebDynpro for Java ???)
    - create a web screen in the portal and publish to a Portal or URL. (SDK kit or Developer's kit Like: SAP NetWeaver
    Developer Studio ???)
    - It looks to me like the "SAP NetWeaver BPM" product is "Nice" to have but not required.
    This is soo confusing, PLEASE help!
    Thank You
    Steve T

    Hi Steve
    Adding to Anu's response:
    The prebuilt packages (worksets) cannot be used on a CE portal - only on a NW Enterprise Portal.
    iView templates are also provided which allows you to put together your own pages and worksets. Again, these require the Enterprise Portal.
    You don't have to use an SAP portal. You can use any webserver combined with Java code
    (that makes use of the MDM Java API) to access the data (check out http://catalog.bd.com/ for a sample of this). Of course, this requires a lot more effort on your side.
    "SAP NetWeaver BPM" amounts to NetWeaver CE. It is required if you want to make use of the WebDynpro components in new MDM releases.
    Since you mentioned the MDM Publisher, if you want to simply publish "read only" data to a web front-end, you may be able to make use of the MDM Publisher together with Adboe InDesign.
    Java code can make use of the MDM Java API. Windows development tools can make use of the MDM COM and MDM .NET APIs.
    HTH,
    Mark

  • What are the optimum wifi router settings for ipad mini

    My new iPad Mini WiFi access is really slow on my home WiFi network.  All my other WiFi devices are working fine.  I have a D-Link DIR655 Wireless Router - What are the optimum router setting to ensure compatibility with the iPad?

    I'm having the same issue with a TP-LINK router.

  • What are the "Profile" and "Level" Settings in AME?

    One thing I never understood is the option for the Profile and Level when I'm exporting a clip in AME.  Not sure if those are options for most codecs but it is for the MainConcept H.264 Video Codec.  For Profile, there is an option of "Baseline", "Main", and "High".  For Level, starting from 3.1 and up, it's 3.1, 3.2, 4.0, 4.1, 4.2, 5.0, 5.1.  I don't know what these are and therefore don't know which to choose.  I know that the level has something to do with resolution so if I'm exporting in 720p, which level should I choose?
    **While on the video encoding topic, in terms of quality, best to worst, what would the order be for the types of bitrates?  Is it VBR 2-pass, CBR, then VBR 1-Pass?
    -Sorry if this is a bit off-topic for Premiere CS4.  There just wasn't any specific location for AME or Video-encoding..

    Profiles outline/suggest certain encoding/decoding capabilities of a given video compression standard, like H.264. For example, the High profile enables B-frames and CABAC encoding. Levels are a means of ensuring that a hardware decoder can properly decode a stream. For example, an iPod can play back Baseline profile, Level 3.0 encoded video, but nothing higher. Higher profiles and levels enable other hardware, like Blu-Ray players. For the most part, you can ignore levels when encoding for computer playback, and only concern yourself with profile. I pretty much stick with [email protected]
    The link Eddie posted has a ton of information, but here's a good article from Jan Ozer that puts it in more accessible terms.

  • What are the incoming and outgoing settings to set up freeserve email accounts on ipad2

    I have an Ipad 2 and am trying to set up email from an old Freeserve account in the UK, I have set this up and can receieve emails but cant send emails.

    After many, many, frustrating hours trying to set this up on my Dad's iPad, I think I have found a solution. Thought I'd share it in case anyone else was still perservering with a freeserve email address.
    It basically involved
    - setting up a pop3 account (Settings/Mail,Contacts, Calendars/Add account/Other/Add mail account) with pop.orangehome.co.uk and smtp.orangehome.co.uk as the incoming and outgoing settings
    - letting it try to 'verify' those settings (which will probably fail)
    - if asked 'Do you want to try without SSL' (or similar), click no
    - Dismiss the window which says something like 'this account may not be able to send or receive emails' and save the settings as they are.
    - Go back into the account you have just set up and there should be some more settings to fiddle with - 'SMTP' and 'Advanced'.
    - In 'Advanced', switch 'Use SSL' to off and change the Server port to 110, then go back to the previous screen
    - Click on SMTP. It will probably show the primary server as smtp.orangehome.co.uk. After fiddling around with the settings for ages I decided to see what would happen if I used a different smtp server. I had previously set up a gmail account, so I tried smtp.gmail.com. For the record, this already had my email address as the user name, my gmail password, SSL on, Authenticaion as password and port as 587. Low and behold - it worked. I'm no expert but I assume this just means it is using the gmail 'route' to send an email rather than the freeserve/orange/EE route.
    If you haven't got a gmail account to use, it might be worth setting one up just for this purpose.

  • What are the possible reasons for a procedure to go into uncompiled state?

    hi,
    we are working on a warehousing project where in we have a set of procedures that run every day to fetch the data from the source and populate it into the target. For the past few days some of these procedures are going into un-compiled state even though nobody has touched these procedures for a long time.
    The behavior of these procedures is not consistent in the sence that when these procedures are run through the scheduler, these procedures are getting failed, where as when we run them manually they are working fine and subsequently when we try running them through the scheduler again they seem to be working.
    following is the error message that is displayed when this procedures are failed:
    ORA-04062: timestamp of package has been changed.
    Kindly help me.
    Thanks,
    Raaji.

    Thanks for the reply.
    No, My procedure is not using any db links. And i have checked for remote_dependencies_mode, by using the below query and I got the VALUE as TIMESTAMP.
    SELECT name, value
    FROM gv$parameter
    WHERE name = 'remote_dependencies_mode';
    Do I need to change this value to SIGNATURE?
    Thanks,
    Raaji.

  • What are the minimum IE 11 settings required to run activeX plugin in 64bit Mode?

    Tried many different internet options such as advanced->Enhanced protected mode, "security->automatic filtering of ActiveX" "advanced-> 64bit enhanced protected mode (windows 8)", enable many different ActiveX related options
    in custom security options.
    But 64bit ActiveX on some systems and not working in some other (loads 32bit version). Not sure what is the right approach? Is this depends on IE version. For example in IE11 16428 version it is not working. In IE11 17280 version it is working.
    Another observation.
    In some system, File->properties option shows "Internet | Protected Mode: On" then only 32bit ActiveX is working. In other systems it shows "Internet | Protected Mode: Enhanced" and 64bit ActiveX is working.
    Thank you in advance.

    Some are windows 7 and some are windows 8.1.
    Does this concern an ActiveX Control (plugin) you've created or are creating?
    Yes, ActiveX I have created. Created both 32bit & 64 bit ActiveX & registered.
    Does the second line of text in IE Help | About read Update
    Versions: 11.0.13 (KB3003057) on allcomputers?
    There are some differences in versions. One system it is 11.0.14(KB3003057). It is working in this system, Only setting in Advanced tab is sufficient. Need to have Mark
    of the Web (MOTW)
    tag in the local html file. 
    In another system same version IE is is not working.
    Another windows 8.1 system IE version 11.0.9600.17207 (11.0.10 (KB2962872)) is not working. It shows a popup with "If
    you trust this site, you can disable Enhanced Protected Mode
    for this site to run the control" message.

  • What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

    I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
    Thanks

    I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
    It runs premiere like a dream.

  • What are the Server and Domain settings to sync ou...

    I've managed to get Outlook 2010 set up as an exchange server - couldn't carry on trying to use it with hotmail connector - it just didn't work.
    So, now on my Lumia 610 I have an Outlook account and I sign into it with my gmail email address and password. But it says it can't find the server settings. So, I'm having a stab at entering them manually. This is what I'm using:
    Server: imap.gmail.com
    Domain: smtp.gmail.com
    So my question is, are these the correct settings to use???? If not, what should they be?
    I can sense it, I'm close to actually getting my calendar to sync, but I just need to get past this one (hopefully the last!) hurdle.  It's showing error code 80072EFD on my phone by the way.
    Can anyone help?????

    I am sorry to read you are having these difficulties. In all honesty I have personally done many of these and have not had it fail once. That is not to say I doubt you are sure you are doing everything correct but there must be something you are not seeing or doing right.
    First on Windows Live Mail. I did not write it will sync your outlook calendar, I wrote it will Sync your calendar and contacts with your LiveID and thus with your Lumia Windows Phone. When you log in to Windows Live Mail with your Live ID your contacts and current calendar entries which are also on your phone will be synced to this application. Change something on the phone and the change will be synced to the application and the other way around.
    The same  goes for calendars en contacts in Outlook though the Hotmail connector. Assuming this installed correctly you will see a contact list for your liveID in Outlook as well as any calendars you have in your liveID account (and your phone). If you select the calendar from your calendar list belonging to your liveID you will see the entries which you have made on your phone. Any change here will (again) go both ways. On a final note, this will not work with the so-called click to run version of Outlook as this version does not offer this functionality. You will need the full install version of Outlook.
    You do do not copy the calendar entries from one calendar to one in the LiveID calendar list, that is not possible and will not work. What you do is copy the complete calendar to the folder for yoru LiveID Outlook account once it  is available as a copy in the liveID list of calendars you use that copy and discard (or disregard) the original.
    Open Outlook on your computer.
    Click File, then click Add Account.
    Select Manually configure server settings or additional server types and click Next.
    Select Other, choose Microsoft Outlook Hotmail Connector and click Next. Enter your name, and your Windows Live email address and password. Click OK to complete the setup.
    Click Calendar. You should notice new Calendars have appeared for your email account. 
    Right-click your main Outlook calendar and then click Copy Calendar.
    In the Copy Folder window, scroll to find your Windows Live email account.
    Click on the email account to select and then click OK.
    Click on the Windows Live account name to select it and then click OK.
    Your Outlook calendar is now copied into Windows Live, but you should continue to use this copied calendar in Outlook. All changes or additions will then be synced to Windows Live and your Windows Phone.
    Unfortunately it is not possible for us to offer you direct support with this, but please contact Nokia Care (in this case) by phone or chat if you need further assistance. You can reach them through this link
    I hope you can get this resolved, let us know how you get on,
    Kosh.
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • What are the correct Send Connectors settings in Exchange 2013

    Hi
    I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles. I am trying to set the send connectors settings, because I've not been able to send nor receive external email via owa. Since I'm separating the exchange roles, my mailbox
    servers only use internal IP settings and cannot resolve external DNS. I'm thinking I need to tick, proxy through CAS for it to work? any suggestions?

    Hi 
    Can you please let us know what version of Exchange that you are using 
    "I'm new to exchange, successfully setup a lab with 2 cashub roles and 2 mailbox roles"
    - Because Exchange 2013 does not hold hub role.
    " I am trying to set the send connectors settings, because I've not been able to send
    nor receive external email via owa."
    It would be great if you could answer few questions so that people can help you out here
    Are you able to send emails internally without any issues with Outlook ? If not can you paste the errors.
    What error you are getting while trying to send emails through owa . Can you paste the errors.
    If you are looking for steps to create new send connector please follow below technet article
    http://technet.microsoft.com/en-us/library/aa998936(v=exchg.150).aspxFeel free to post your comments/errors you received  to proceed
    further
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

Maybe you are looking for