What are the names of the flowers on Apple TV screen saver?

what are the names of the flowers on Apple TV screen saver?
I am looking for the the botanical names...
Would anyone know where to find the credits for the photos used on the flowers screen saver?
-carol8ne

You can stream from a Mac via itunes selection (iPhoto events or a folder) - it has 8GB of solid state temporary storage, but quite how things are cached/flushed from here is a bit of a mystery - you cannot say designate 2GB to hold photos or prioritise photos over other material.
Even rentals seem to flush if you've watched them and they haven't expired - relative fell asleep during a rental yesterday so i suggested she watched it today and it downloaded from scratch again, and the AppleTV hadn't had anything but music playing in the interim. Silly this really. There's a post on another section where someone used 17GB of their data allowance to watch a HD movie as it kept reloading!
Yes you can stream photos from iPod/iPad using Airplay, but to be honest i don't think ATV2 offers that much over ATV1 for photos (yet anyway), and in some ways it's inferior.
ATV2 is far more responsive/uses less power etc but I'm not convinced you get anything groundbeaking unless you have a lot of guests who could use it via Airplay from their iphones (and with ipads currently without cameras, photos would have to come from somewhere else in the first place).
Message was edited by: Alley_Cat

Similar Messages

  • What are the names of the ports I have in my Macbook Pro to plug an external monitor into?

    What are the names of the ports in my MacBook Pro that I can plug an external monitor into?

    You have Thunderbolt or Mini DisplayPort. If you know which external display you want or you already have it, look at the ports it has got and get a Mini DisplayPort adapter for it. There are Mini DisplayPort adapters for DVI, VGA and HDMI.
    Most external displays have DVI, VGA or HDMI. If you can use HDMI, use it, because it will provide much better quality. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US
    Mini DisplayPort adapters can be used with Thunderbolt

  • What are the names of the servers of "Yahoo!"?

    Hi everybody!
    I would like to use Mail to access my yahoo! e-mail account and they ask me to set up the incoming and outcoming servers. The problem is that I don't know for sure what I must enter in the spaces...
    Could somebody who has already done the steps tell for me the name of the two servers for a Yahoo! account?
    Thank you!

    Yahoo does not support IMAP access to its mail servers. It offers web mail access for all accounts, & supports POP3 access for Yahoo Mail Plus accounts. Instructions for configuring the Plus version for POP access are available from Yahoo support, or by Googling that name. You must configure both your Plus account at Yahoo & your client app.

  • What are the names of the cursors and mouse pointers in Win 8?

    I am writing a VBA program that is to work with pointers and cursors. 
    What would be the code to change them, where are they, and what are their names?
    Can I customize/import my own?
    (Forgive me if this is a duplicate.  They first one burped me out...)
    Everything I know I learned from my cat. No matter what the situation is, there is a napp for that.

    Hi
    Emerogork2,
    To develop a VBA program to work with pointers and cursors ,the following links may be helpful.
    About Cursors(This link shows us that we can custom a cursor )
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms648379(v=vs.85).aspx
    Cursor Class(This is about cursor class and there is an example of custom cursor)
    http://msdn.microsoft.com/en-us/library/system.windows.forms.cursor(v=vs.110).aspx
    Cursors.Hand Property(This includes an example of overriding
    Control.OnMouseHover method)
    http://msdn.microsoft.com/en-us/library/system.windows.forms.cursors.hand(v=vs.110).aspx
    Cursor.Position Property(This includes an example of creating a cursor from the current cursor`s handle)
    http://msdn.microsoft.com/en-us/library/system.windows.forms.cursor.position(v=vs.110).aspx
    Considering this is a developing issue, it`s recommended to post it in our MSDN Forum .The people there are more experienced in this area.
    MSDN forum
    https://social.msdn.microsoft.com/Forums/en-US/home
    Best regards

  • What are the names and the parameters of the SSIS reports

    what are the names and the parameters  of the SSIS reports
    (delivered with and included in the SSMS)
    to navigate from my reports to the build in reports
    it's necessary to know the reportname and the parameters.
    I want to "combine" respectively want to navigate
    from custom reports (works excellent) to the 5 build in reports
    please have a look at the attached picture and in particular
    to the blue arrow.SSIS_ReportsNavigation
    thank you for providing an answer or a hint.

    to navigate from my reports to the build in reports
    Those integrated reports in SSMS are not hosted in SSRS, so there is no URL available where you can navigate to.
    The reports run in client side rendering mode = RDLC.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

    What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

    You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
    Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

  • What is the name of the folders which are your backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer

    what is the name of the folders which are the backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer, authorize it and sync with Iphone 3Gs and Ipod 5th gen.
    I

    I second the whole iTunes folder approach.
    If for some reason you have split the media folder from the library files then the media folder needs to restored to the same path it used to have while the library files can be copied into the music folder of your new profile.
    If in dobut, backup up the entire Documents and Settings folder before wiping the infected drive, but be selective about what you restore as many viruses drop active components capable of reinfecting the compuer in the temp folders and internet caches. It is much easier to backup more than you need than to discover after the fact that you no longer have access to some vital project you'd been storing in a folder on the desktop.
    tt2

  • What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

    What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?

    It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.

  • What is the name of the table where Release Strategy changes are maintained

    Dear Friends,
                       Every time I make the changes in the Release Strategy Codes the Signature of the Approver changes in the Output. The problem is that it even changes for the Older PO's which are already approved by some other approver. Is there any way this problem can be sorted out? or can any one give the name of the table which records the changes made in the Release Strategy along with time and date? I will be really thankful if you guys can help me out!

    Hi Chintan,
    I hope you are talking about the release codes, which we attach later on to user Ids and signature means its description. I hope followed correctly.
    In standard system, as and when you change the description of release code at back end, it gets reflected on front end. No matter whether its old or new PO. There is no way out to stop this. Every time you display the purchase order, the release codes checks for description at back end and displayes the same. Still, it should not bother you, as the already released PO dosent get affected for any changes you do at back end in the entire release strategy.
    Beside the tables mentioned by other friends AUSP is the table where all release related entries gets stored.
    I hope it clarifies.
    Regards
    sachin

  • What is the name of the table for finding user exit !

    What is the table name to find the user exit !

    Hi,
    Goto to the table tstc and enter the transaction code for
    which u want to find out the User-Exits. Check out the
    program name from the result. Goto SE38 and dee that
    program in display mode. Then search for the string Call
    Cutomer-Funtion. All the result of search are the user
    exits defined there for that transaction.
    SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
    So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
    cheers,
    vasavi.
    kindly reward if helpful.

  • I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    Bookmarks and history are stored together in your profile folder in a database file named places.sqlite. These articles should help with restoring as much or as little of your other profile as you like:
    Locating the folder: [https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
    The following article has suggestions for recovering bookmarks: [http://support.mozilla.com/en-US/kb/Lost%20Bookmarks Lost Bookmarks | Troubleshooting | Firefox Help].
    To move more settings, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

    Iphone 4s - how do I change the name in the contacts for the owner of the phone - it is coming up as the other person who uses the laptop - so when ringing or texting anyone 2 names are being used as the caller id on the screen

    *Ralph Johns* writes:
    "Your options are:
    Get a trial account form @mac which will work as an iChat name after the 60 days run out but not be a email account that is valid (And is free)"
    Do you mean a trial account from .Mac? (DotMac)
    "Get an AIM Screen name and set it to Display what you want as you set it up.
    The Screen name can be whatever yu want but you can also set it to display something else as well."
    I had thought about this, but it seems other people have already chosen the screen name "pinksharkmark" and virtually every variation of it I can think of. So that isn't an option for me. As for getting it to display something else as well, do you mean that if I were to get an AIM screen name like "CromulentCat" I could somehow log in to iChat under the AIM account "CromulentCat" yet get iChat to represent me to my Buddies as "PinkSharkMark"? Because I have to admit I don't see how that can be done. It appears as if iChat displays to anyone chatting with you precisely the account name you logged in under and nothing else. So if you logged in using a .Mac account, then you are displayed as "[email protected]" while if you logged in under an AIM account, you are displayed as "CromulentCat". But that's it that's all... there is no way to change CromulentCat to PinkSharkMark.
    Thanks very much for taking the time to reply, though.

  • What is the name of the i-pad (retinal display) adaptor for photos of deer cameras? Husband's birthday gift, don't hunt.

    What if the name of the i-pad (retinal display) adaptor for photos of deer?
    Husband's 60th soon, need the gift!
                        Thanks

    There is a camera connection kit. Be sure to get the correct one for your husband's iPad.
    This one is for the 1st, 2nd and 3rd generation iPads;
    http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit?fno de=3a
    For the 4th generation iPad, these two adapters are sold separately;
    http://store.apple.com/us/product/MD822ZM/A/lightning-to-sd-card-camera-reader?f node=3a
    http://store.apple.com/us/product/MD821ZM/A/lightning-to-usb-camera-adapter?fnod e=3a

  • Please tell me the name of the table where URLs are stored?

    What is the name of the table which stores the URLs/Links or attachments of GOS objects?
    Regards,
    Prathap

    Hi,
    Please check these tables if they are of any use....
    /SAPPSPRO/RMOBRL        Objekt Links in GOS Environmen forRecords
    GOSTYPE                          Types for GOSDIR
    PLMM_ACT_BREL              Relationships in GOS Environment
    SGOSATTR                        SGOS: Attribute of Generic Services
    SGOSSTXT                        SGOS: Texts for Generic Services
    SGOSSUBT                       Text Table for SGOSSUB
    SRBCSBREL                      Relationships in GOS Environment
    SRGBTBREL                      Relationships in GOS Environment
    Regards,
    Siddarth

  • HT3275 What if my error message is the following:  The backup disk image "/Volumes/********'s Time Capsul/****'s MacBook Pro.sparsebundle" is already in use. (I have redacted the name of the computer with asterixes)

    What if my error message is the following:  The backup disk image “/Volumes/********'s Time Capsul/****’s MacBook Pro.sparsebundle” is already in use. (I have redacted the name of the computer with asterixes)

    This is a complex procedure.  
    Pull the power cord from the back of the Time Capsule
    Wait a minute or two
    Plug the power cord back in to the back of the Time Capsule
    This will fix the issue 98% of the time. If you are in the unlucky 2% category, more help is here from Pondini, the Time Machine guru:
    The Backup disk image ... sparsebundle ... is already in use.

Maybe you are looking for