What are the new instruments and loops included with 7.2?

Subject says it all.
Thanks

•New instruments: Radio Sounds, Nature Sounds, Comedy Noises, Applause and Laugher.
•New loops: 520 loops in iLife Sound Effects folder.
I may be wrong! I haven't installed 7.2 yet.

Similar Messages

HT5117 What are the new dpi and pixel rules for ibook cover art?

Plz tell me the new pixel and dpi requirements for ibooks. Thx

K T wrote:
Image dpi has a direct effect on image quality.
An image has no dpi, only pixels. What has dpi is the display that shows the image.
The pixel dimensions are an attribute of the image and determine how much information is in the image. The dpi is an attribute of the display and determines how many pixels are displayed in a given area.
The two values are independent and have nothing to do with each other.
If a program such as Photoshop or InDesign allows you to specify a dpi setting, it is so it can export an image with pixel dimensions that match the dpi of the target display, so the image appears at a pre-determined physical size. The programs also use the dpi setting so, when you ask to be shown the image at original size, the software can scale the image so it appears at that size even on a display whose dpi does not match the dpi of the target display.
When you upload a cover image, there is no dpi. There is one and only one thing: the pixel dimensions of the image.
Michi.

What are the new pricing and fees for Cs6?

What will I be forced to pay to keep upgrading my Master Collection to the next version (Cs 6)? Can I still purchase Dvd's and install the software on my own computer or will I be forced to move to the non-safe cloud? Where my hardwork can be hacked and stolen! The cloud is worthless to many of us wishing to keep control over copyright and useage rights.I am guessing more people want to keep it the way it is and not shift control over to a hackable cloud. Nothing on the web is safe, so why shift everything over to the cloud and force many of your long time customers to pay monthly fees or the software locks us out. For over 25 years I have bought and paided for Adobe software, where is my monthly kickback for using your software? If this is the wave of the future I guess i have bought my last upgrade!

I think you misunderstand the cloud.
Nobody is going to force you to store your files there. It’s a part of the service that you can use or not use at your own discretion.
As for pricing, if you’re on CS5 or CS5.5 you will be able to buy an upgrade at reduced pricing and continue that route. If you’re on CS4 or earlier you’ll have three choices.
1.       Pay full price for CS5
2.       Move to Creative Cloud for whatever the subscription price is
3.       Stay with what you have.
Hope that helps,
Bob

What are the new multitouch functions?

What are the new functions, and can MBP's with multitouch be upgraded to take advantage of them?

The only new thing that I saw is the 4 fingers move.
up, you have exposé, down you have desktop, left or right, you have apps switching...
But I aslo wonder if I can have this feature on my old MBP. Anyone ?

What are the key benefits and limitations of new pricing model of X5-2?

What are the key benefits and limitations of new pricing model that started with X5 version?

1. Elastic Configurations
Size/price hardware by the number of servers; Fixed configs no longer required
Start with 2 Database Servers and 3 Storage Servers. Incrementally add database or storage servers online.
2. Capacity-on-Demand (CoD)
Upon installation, activate 40-100% of the cores per server and reduce software licenses; Applies to Eighth Rack now too
Activate and license more cores when needed; Active cores may not be deactivated
3. OVM and Trusted Partitions
License software on Virtual CPUs within a VM; Ideal for special-purpose DB options
You can mix different combination of options for different DB on one Exadata.
OVM has no License cost; support is included with premier hardware support
Limitation:
At least 40% of usable cores on the machine must be licensed for Oracle software
Cannot use both OVM and CoD to license less than 40% of cores
A server must be virtualized or non-virtualized – not mixed
A RAC cluster can mix virtualized and non-virtualized servers
4. “Flash Drive” License Metric for EF Storage Server Software
$20K/drive; 8 flash drives/EF server vs 12 disk drives/HC server = 33% higher list
Can transfer licenses between Flash Drive (2 licenses/drive) and Disk Drive (1 license/drive) – part # is the same

What are the pro's and con's of the 4s?

I am not yet an owner of the 4s iphone. So what are the pro's and con's of owning the white 32gb iphone 4s? I have had the white 32 gb iphone 3gs for two years and until I get a job I will not be buying the 4s I so need.

Samplers do alot of things, what do you need a sampler for?
Korgs remind me of alot of presets and alot of verb and chorus. I guess if you're posting here you already have EXS and want more sounds or more functionality and if the korg thing is true you lean more to sampling/synthesis than instrument recreation (as in you probably aren't going for VSL if the korg caught your ear). Independence looks really cool, it's quite new. Kontakt is demanding and very flexible, both include huge libraries and I know kontakt has tons of great filters, FX, modulation. It also needs a pretty strong update-which is being dealt with after a year or so.

What are the BEST Books and Best websites for java biginners?

Dear All,
What are the BEST Books and Best websites for java biginners-Especially for fast learning.
Thnaks
KMK

This is my standard reply:
[Sun's basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
[Sun's New To Java Center|http://java.sun.com/learning/new2java/index.html]
Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
jGuru
A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch
To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
[Yawmarks List|http://forums.devshed.com/java-help-9/resources-for-learning-java-249225.html]
[The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance]
[http://javaalmanac.com|http://javaalmanac.com]
Bruce Eckel's [Thinking in Java(Available online.)|http://mindview.net/Books/DownloadSites]
Joshua Bloch's [Effective Java|http://www.amazon.co.uk/exec/obidos/Author=Bloch,%20Josh]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance ]
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]
Gosling is the creator of Java. It doesn't get much more authoritative than this.
Joshua Bloch and Neal Gafter [Java Puzzlers.|http://www.javapuzzlers.com/]

What are the output type and Tcodes?+

What are the output type and Tcodes?

hi,
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
regards
siva

What are the New Features in Apex 3.1.2 as Comparitive with Apex 3.1

hi all
what are the new features in Apex 3.1.2 as compartively with Apex 3.1?
Is it recommended to use 3.12 comparitivly 3.1?
please drop ur valuable answers
many thanks
khaja
Edited by: ATM on Dec 27, 2008 1:06 PM
Edited by: ATM on Dec 27, 2008 1:11 PM
Edited by: khaja on Jan 18, 2009 10:47 AM

Hello,
Versions 3.1.1 and 3.1.2 are actually patched version of APEX 3.1. As such, they don’t introduce new features, but mainly fix bugs from the main release. If you want to learn specific details about these versions, you should read the readme file attached to the patch set files (on metalink).
It’s always best to work with the latest patched version, as it reduces your chances to encounter bugs. In general, so far the new APEX versions added many new features and technologies, while maintaining backward compatibility, so existing applications functionality is not impaired. Personally, I don’t see any reason not to upgrade and use the latest version, certainly when you are comparing 3.1 to 3.1.2.
Regards,
Arie.

What are the new features in R12 iStore as compaired to 11i?

What are the new features in R12 iStore as compaired to 11i?
Also plz tell main difference in R12 and 11i iStore functionality.

Hi,
The information can be found in Release Content Documents (RCD) Published by Oracle.
Please refer metalink note 404152.1 ... download "Customer Relationship Management Family RCD (zip, 3.2 MB)"
You will find istore specific details in r12_mkt_sales_rcd.zip
Thanks,
Hrishi

What are the New features in OBPM in performance, integration & dev level

Hi,
Could someone help me
I would like to know what are the new features in Oracle BPM that will improve the performance of appln,
and new features in integration and development level.Thanks in advance.

Hi,
The information can be found in Release Content Documents (RCD) Published by Oracle.
Please refer metalink note 404152.1 ... download "Customer Relationship Management Family RCD (zip, 3.2 MB)"
You will find istore specific details in r12_mkt_sales_rcd.zip
Thanks,
Hrishi

What are the new sony phones which support flashlite 1.1?

Hi friends,
Can you please tell me that what are the new sony phones
which support flashlite 1.1?
and which have wallpaper etc. in flashlite.
regards
vivek

Here
it is a link in this very site!!!

What are the new features in the new ipod touch?

So for the new iPod Touch that came out on October 12th, what are the new features that they have?
I can't find any difference between the last iTouch and this new iTouch.....plz tell me!

There's no new iPod Touch. What came out Oct. 12 was just software, the new iOS 5. For an overview of new features, see here: http://www.apple.com/ios/

What are the new features of Oracle 10g over Oracle9i

Hi Grus..
i want to know what are the new features of oracle 10g over Oracle 9i as well oracle 11g over 10g.. can any one give me the detailed document.
Because I'm struggling each and every time while the interviewer asked above question.
It's very helpful for me if any one give me the detailed document regarding above question
Thanks In Advance
Arun
Edited by: Arun on Oct 23, 2010 10:19 AM

Hi,
Just check below link..would be helpful..
http://www.oracle.com/global/ap/openworld/ppt_download/database_manageability%2011g%20overview_230.pdf
and
Each release of Oracle has many differences, and Oracle 10g is a major re-write of the Oracle kernel from Oracle 9i. While there are several hundred new features and other differences between 9i and 10g, here are the major differences between Oracle9i and Oracle10g:
Major changes to SQL optimizer internals
Oracle Grid computing
AWR and ASH tables incorporated into Oracle Performance Pack and Diagnostic Pack options
Automated Session History (ASH) materializes the Oracle Wait Interface over time
Data Pump replaces imp utility with impdp
Automatic Database Diagnostic Monitor (ADDM)
SQLTuning Advisor
SQLAccess Advisor
Rolling database upgrades (using Oracle10g RAC)
dbms_scheduler package replaces dbms_job for scheduling
and you need to refer oracle documentation for sql, plsql references where you will know particular enhancements made...
thanks
Prasanth
Edited by: Onenessboy on Oct 23, 2010 10:22 AM

What are the new / correct URLs for the Servlet / Persistence XSD ?

Hi,
the URLs: http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd
http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd
Do not work anymore and you constantly get annoying validation errors in all XSD validating IDE's.
What are the new URLs now? I could not find any related document or article in the internet.
Thanks!
Sebastian

you should never rely on remote resources for xml validation. you should always have them locally.

What are the new instruments and loops included with 7.2?

Similar Messages

Maybe you are looking for