What are the non-basic services charges on my first bill

I switched to Verizon Freedom bundle package to save money. I was shocked when my first bill arrived with $123.03 due. It states Verizon non-basic charges 107.68 What is this and why was I not informed of these fees ahead of time. This is ridiculous.

Non-basic charges are usually things like Voice Mail and long distance calling. The first bill is always a stinger. You pay a full month in advance and a partial month, from the date of installation until your new bill date. So your first bill can be anywhere from 1-2 months of service. After the first bill you are on a 30-day billing. You can see your bill detail by signing in online and clicking on My Bill and then on "Print and Download" towards upper right of that page and being sure you select the Entire Bill. The bills are confusing because by law the services are taxed differently for basic and non-basic so the bills have to be broken down into those services and each taxed accordingly. Our government wants their share...too much as usual, but we all know how the government is...

Similar Messages

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the Non SAP data sources supported for Analysis workbooks?

AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.

HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

What are the non downloadable files in ipad, what are the non downloadable files in ipad

what are the list of files that are non downloadable in ipad using safari ?
Example:
www.mediawiki.org/wiki/Download
File type:tar.gz

some more files & filetypes which are displaying the error message "download failed"
Filetype
URL
rar
http://www.ccp4.ac.uk/cvs/viewvc.cgi/ccp4/man/man.tar?view=annotate&hideattic=0
war
http://www.subtitles.at/Cartel.War
EAR
http://www.wandoujia.com/apps/appinventor.ai_yiweibmu.ear
tar
https://bitbucket.org/wwmm/jumbo-converters/src/90b4857aafec9fc3b8bf50fd1b538ee6 68562a3d/jumbo-converters-spectrum/materials/VarianNMRdata.tar/VarianNMRdata.tar ?at=default#
Apk
apk files are being supported in safari
Jpg – having the download option within the site
http://stock.tobinphoto.com/whitetail-deer-snow-photos-1122.htm
please provide all the file types extensions which can not be downloaded in ipad&iphone.

What are the non-obvious side-effects of using $psdefaultparametervalues.add("ft:wrap",$True) ?

I'm thinking about dropping these two lines into my profile.ps1 script:
$psdefaultparametervalues.add("ft:wrap",$True)
$psdefaultparametervalues.add("ft:auto",$True)
Are there any adverse side-effects that I will suffer after I do that?
I know that I'll have to do explicit overrides to those switch values to Format-Table if I don't want those defaults.

One thing I can think of is if you use -Property * to list everything, it has the potential to leave out columns if the properties are too long.
Try this first:
gci | Select -first 1 | FT *
Then this:
gci | Select -first 1 | FT * -auto -wrap
Besides that , I can't really think of anything else; perhaps others can think of things.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

What are the fieldpoint basics? Have I understood correctly?

Sorry for being a complete newcomer on this subject.
I've got a bit of distributed I/O in a lab at work, and instead of cabling up PCI devices centrally from all over the room, I've begun thinking that a networked approach would be better. Of course I know of "Fieldpoint" as a topic within NI, but I've no experience of it whatsoever.
Am I correct in assuming that.....
Fieldpoint is a network-based distributed I/O architecture (Ethernet)?
Fieldbus is the communication protocoll used to communicate with Fielpoint controllers?
I need "LV Realtime" to be able to use Fieldpoint?
The individual host-controllers can be accessed from anywhere on the ethernet network?
How does Fieldpoint compare to a USB-based VXI or PXI solution. Aside from the USB/Ethernet differences which is clear to me. Which is easier to expand? Which is more flexible?
Sorry for the newcomer questions, but everyon's got to start somewhere.....
Thanks
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2)

Am I correct in assuming that.....
FieldPoint is a network-based distributed I/O architecture (Ethernet)?
Yes, FieldPoint is a distributed I/O architecture. It can be ethernet, serial (RS-232 or RS-485), CAN, or FieldBus based.
FieldBus is the communication protocol used to communicate with FieldPoint controllers?
No. The serial controllers use the Optomux protocol. The ethernet controllers use a custom protocol developed by National Instruments. The Fieldbus and CAN controllers use FieldBus and CAN messaging protocols, respectively.
I need "LV Realtime" to be able to use FieldPoint?
No. You can use FieldPoint modules over a network without LabVIEW Real-Time. To embed programs within the [c]FP-2xxx series of RT controllers, you will need LabVIEW RT.
The individual host-controllers can be accessed from anywhere on the ethernet network?
For the ethernet based controllers, assuming you have not enabled security, you can access them from anywhere on the same subnet. If you are on a different subnet, you will need to know the IP Address in advance to acquire data from them.
How does FieldPoint compare to a USB-based VXI or PXI solution. Aside from the USB/Ethernet differences which is clear to me. Which is easier to expand? Which is more flexible?
Generally speaking, FieldPoint is slower, but has better isolation and is more rugged. Additionally, FieldPoint is better as a mix and match system, but does not have the breadth of offerings of VXI/PXI. Furthermore, FieldPoint as an I/O system and not a DAQ system, does not offer deterministic sampling, triggering, or synchronization.
Regards,
Aaron

What are the non available features in iphone bought from saudi arabia ?

Hello ,
I am going to buy an iphone from saudi arabia since i am there but i heard it lack some features there such as facetime !
I am going to the iphone in netherlands , i live there , and i would like to know if i will still have the iphone without all the features working
Thank you.

If it was purchased unlocked, and from an authorized Apple distributor. If it was bought from some random phone shop then there is no way of knowing.

In import PO - what are the g/l accounts updated.

hi
in import PO what are the g/l accounts updated.
example:
1.Miro(bill of entry) - 7 conditions if freight and clearing n forwarding
   Charges extra 2 conditions
2.Migo
3.Excise - J1iex_p
4.Miro(for freight and clearing n forwarding)
5.Miro(for main vendor)
just tell me
Regards
Manju

Hi,
There are following 7 Import Duties;
JCDB     IN:Basic Custom Duty
JCV1     IN : CVD
JECV     IN : Ed Cess on CVD
J1CV     IN : H&SECess on CVD
JEDB     IN : Ed Cess on BCD
JSDB     IN : H&SECess on BCD
JADC     Addnl Duty of Custom
1. MIRO (Customs Office)
Customs Office Vendor - Cr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
CVD Clearing A/c - Dr
Customs Clearing A/c - Dr
Customs Clearing A/c - Dr
Customs Clearing A/c - Dr
2. J1IEX (Capture BOE)
No FI Entry
3. MIGO (GR)
Stock A/c - Dr
GR/IR Clearing A/c - Cr
Customs Clearing A/c - Cr
Clearing & Forwarding Charges A/c - Cr
4. J1IEX (Post BOE)
CENVAT Input BED - Dr
CENVAT Input ECS - Dr
CENVAT Input SECess - Dr
CENVAT Input ADC - Dr
CVD Clearing A/c - Cr
5. MIRO (Import Vendor)
Import Vendor - Cr
GR/IR Clearing A/c - Dr
6. MIRO (Clearing Agent)
Clearing Agent Vendor - Cr
Clearing & Forwarding Charges A/c - Dr

Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

Verizon iPhone 4S SIM UNLOCK Tutorial
SGMD1 Oct 19, 2011 9:40 PM
Currently Being Moderated
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S!
****ALSO I JUST SPOKE WITH NICHOLE (VZN GLOBAL SUPPORT) REGARDING IF THE IPHONE 4S HAS TO BE ACTIVE AFTER SIM UNLOCK AND THE ANSWER IS: NO!

What are the settings for automatic service PO?

What are the settings for automatic service PO?

Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you!

What are the basic steps for creating a content repository?

I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
If anyone knows of any guides that show a step by step process that would be great too.
Thanks
Paul

Hi Paul
First of all you need to create a new repository
Suppose you want to add all the documents under folder Paul under C: Drive
(Even you can put whole documents of C: drive into Paul)
Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
There you can create a new directory by clicking on button New
Give the parameters as follows :-
Name               :           Anything you like
Description       :           Anything you want
Prefix (must start with /) : Probably same as your repository name like \Paul
Lookup mode : caseless
Root Directory   : C:\Paul
NOTE: This is the trick. You need to give the proper path means folder path which you want use as repository)
Repository Services : Any services you want
Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
Security Manager         :           AclSecurityManager
ACL Manager Cache   :           ca_cm_rep_acl
The save it
Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
I think the above information will help you. If still you have problem, please feel free to contect me.
Regards,
Chamkaur

What are the services will cover in extended 2 year warranty for g6-2301ax?

Hi all,
I would like buy new g6-2301ax laptop. I got to know about 2 year extended warranty.
My doubts are
What are the services will cover in that extended 2 year warranty?
Will they liable for any internal device failure like HD, RAM, Display and Chipset?
Thank you

Hello MRSrinivas,
I see that you have questions about an extended warranty.
All the information I provide would be concerning an HP extended warranty.
If you purchase a warranty from a retail store or online from a site other than HP.COM then the information would not be relevant because the terms and conditions may differ for that warranty.
Here is a link with information on the extended warranty and the different kind of features you can get with an extended warranty.
A standard warranty covers hardware failures on the computer for the length of the warranty period. That includes hard drives, memory (RAM), processors, motherboards, etc.
It does not cover any accidental damage such as cracked screens or liquid damage.
You can purchase HP warranties with features like accidental damage protection which will cover a cracked screen and liquid spills.
This is basic information about the warranties you can refer to the document for in depth breakdown of what the warranty includes and what features you can get with different warranty plans.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

What are the services in KM repostory?

Hi Gurus,
What are services available in KM Repository?
Thanks in Advance,
Dharani

HI
refer to this
http://help.sap.com/saphelp_nw70/helpdata/EN/c1/c87d3cf8ff3934e10000000a11405a/frameset.htm
dharani wrote :
what are the services in KM repostory
most of the basic question u can find information in help.sap.com
its better to work on search engine and then u can post here
just type what u typed in this thread in the above mentioned website.
regards,
vijay.

What are the charges, and who pays if I send a text overseas?

What are the charges, and who pays if I send a text overseas?

You pay as part of your cellular/telephone bill unless you use Wi-Fi which is free.

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

What are the non-basic services charges on my first bill

Similar Messages

Maybe you are looking for