What are the normal Boot time?/Wake from sleep time? for MB?

Looking to buy a MacBook for my wife to replace her old Dell D-420. The Dell still works fine but takes forever to boot and to wake from hibernation. I was given an old iBook a few weeks ago and was amazed at how fast it woke from sleep mode (the boot times were pretty snappy too). So my question is. What is the "normal" wake from sleep time on a MacBook? How long does a cold boot take?
BTW: Steve isn't going to surprise us with an updated MacBook next week is he??
Thanks
Soon to be MacBook owner.

lancia is right- 56 second sound about right, my 2.0 GHz MacBook boots in about 49 seconds.
If you want your MacBook to boot up faster, you can reset the PRAM (parameter random access memory). What this does is that it resets all the devices it searches for when it starts up: forgets about them, literally
To do this, press down the command (the buttons next to the space bar) , option, P, and R keys at the same time when you turn on your MacBook. Press these keys until you hear the tone a second time. Make sure to do it quick, because after you hear the tone it won't work.
Hope this helps,
Wookams
To your BTW question:
Almost certainly not, but I still recommend waiting a couple months extra because Apple notebooks usually update themselves every 200 days or so. I was disappointed from learning this, but hey...

Similar Messages

  • What is the keyboard command to wake from sleep?

    Im trying to remotely wake my mac from sleep from my iPad (Actions app) and wonder if there is a keyboard command to wake from sleep

    Normally, you can press any button (space bar is good) or click the trackpad/mouse to wake a machine from sleep. For this app (which I haven't used), you might want to go to System Preferences > Energy Saver, and  check the box 'Wake for network access.'

  • What are the normal settings to connect to wifi?

    I visited my friend over the weekend and her school required me to change my airport settings in order to connect to the internet. Ever since I got back, I have been unable to connect to my usual wifi source. If I can, it drops off after a few minutes. What are the normal settings to connect to wifi?

    As a minimum, the following would be the "normal settings" to connect your Mac to an unsecured Wi-Fi network. These settings can all be found in System Preferences > Network > AirPort or Wi-Fi > Advanced
    TCP/IP tab: Configure IPv4: Using DHCP
    Proxies tab: Nothing should be checked on this tab, except the "Use Passive FTP Mode (PASV)" option.
    Hardware tab: Configure: Manually
    On the Wi-Fi tab, you may also want to delete any Preferred Networks that you are not using.

  • What are the ways to download data from ods?

    Hi all,
    what are the ways to download data from ods?
      1. se11/se12
      2. listcube
      3. infospokes.
    Apart from the above 3 is there any other way to download data from my ods.
    I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
    Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
    thanxs
    haritha

    Hi Haritha,
    Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
    Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
    Now you should see and Excel Icon on top, click on it then select Table , then
    Microsoft Excel and it will open your data with all columns you want.
    I just tried for 213 columns
    Hope this helps.
    Thanks
    CK

  • What are the idoc to send data from sap hr to sap fi

    what are the idoc to send data from sap hr to sap fi

    Message type of IDoc depends on the data you wish to send.
    please detail on the data that you need to send in the IDocs.
    regards,
    Nitin

  • Did 10.5.2 fix the reboot instead of wake from sleep problem?

    Can those of you with 2008 Mac Pros that had the problem where the mac would reboot instead of waking from sleep report whether 10.5.2 solves your problem? I'm waiting to buy a new Pro until this is fixed.
    thanks

    Not for me. I installed the combo update, then the Leopard Graphics Update, repaired permissions. Did some work for about half an hour then put the MP to sleep using the menu. Came back not 2 hours later and hit the space bar to wake from sleep to be welcomed by the lovely Mac chime and a restart. I also installed the update on my MBP 2.6 17" which has not been having this issue and all seems well on the MBP, so I'm leaning towards a hardware problem.
    History - Been having the issue since I received the MP 3.0 on the 17th of Jan, tried resetting the SMS, zapping the PRAM, etc,etc, several times to no avail. Called Apple Care and was given a case number but not offered any solution other than removing all items from Login Items under Accounts and configuring the Energy Savings settings to Never, Never and unchecking all accept for Restart automatically after power failure. This didn't work either as the day after I had called and did his with the product specialist it happened again.
    Everything is stock on the MP 3.0 2008 - Needless to say, I'm putting in another call today.

  • What are the logical database source (SQVI) should i use for quick viewer

    Dear expert,
    Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of   and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Please help.
    Many Thanks.
    Regards,
    Karen

    Hi,
    Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
    How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
    Between,do you have any reference/link/document on the how to use the SQV1?
    Also, what the difference between SQV1 and SQ01 ?
    And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer  to generate the query?
    Please help.
    Many thanks.
    KH

  • What are the methods called while navigating from one applet to another one

    Hi All,
    Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
    Thanks in advance.
    Best Regards,
    N.Madhusudhanan.

    http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100

  • What are the reports we can get from OPM Quality

    Dear All,
    What are the reports we can get it from OPM Quality module.
    I am unable to get any reports abouts Tests, Samples specifications.
    Can someone please suggest me.
    Regards,
    Jon

    Pl post details of EBS version.
    If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
    The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
    HTH
    Srini

  • 2012 iMac 27" fails to boot AND wake from sleep

    Hi all,
    My 2012 iMac has recently started giving my trouble when booting and waking from sleep.
    When booting - A normal power up results in the apple logo screen being stuck, then I have to hold down the power button for a few seconds until power off, then i power it back up and the computer boots up normally. NOTE: only at the second time does the computer succeed in getting past the apple logo screen to the sign in screen.
    Waking from Sleep - When ever the mac goes to sleep he doesn’t seem to be able to wake up. Usually stuck on a black screen with just the spinning wheel shown. At times i waited more then an hour to see if he can get passed the black screen but in vain.
    Other then that the mac works fine.
    Both issues started roughly two weeks ago and roughly at the same time.
    My mac is mostly used for work, I'm familiar with computers so I am trying to be extra careful with installing weird applications but you could never know..
    SPEC:
    Late 2012 iMac 27'' - 3.4 Ghz i7.
    16GB RAM.
    1TB Fusion drive.
    2GB NVIDIA GTX 680MX
    Wired keyboard and a Magic mouse.
    Mountain Lion 10.8.5 (Updated and backed up on a regular basis)
    Things I've tried:
    Boot to Recovery and Repair Disk/Permissions.
    Safe Boot.
    SMC reset.
    PRAM reset.
    * The first two produced a single case of a normal start up, but after a shut down the problem remains.
    Any ideas/thoughts/help would be much appriciated,
    Thanks in advance,
    Idan.

    Bump.

  • What are the AM Tuning parameters need to be set for 500 concurrent users

    Hi All,
    We are using JDEVADF_11.1.1.5.0.
    What are the exact AM parameters(Pooling and Scalability tab) to be set when we planned for 500+ concurrent users?
    Along with this do we need to set any parameters at weblogic server level, if any please give inputs.
    Any input's would be appreciated.
    Thanks in advance.
    Regards,
    Dinesh

    We can?t give you exact numbers as there are many factors influencing the performance. In hte end you have to make a load test to find the right set of parameters. A good starting point is Andrejus's blog Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Internal Connections and  Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level
    Timo

  • I overcharged my ipad 2 battery for about 3 hours. what are the consequences, i overcharged my ipad 2 battery for about 3 hours. what are the consequences

    i overcharged my ipad 2 battery for about 3 hours. what are the consequences? and there are these tiny fibers and dust that enters insideipad screen. how will i clean them. .please help

    Relax, you cannot "over" charge it.  The built in charging protection ensures it will not overcharge the battery or do any damage leaving it plugged in.  Many folks (myself included) leave our iPads and iPhones plugged in overnight, all night, so they are charged and read for use the next day.

  • What are the penaltys to operating lion from a remote drive?

    My Macbook pro with Lion installed  is runing slower and slower and I have tried all of the fixes that I can find on the internet including, clearing the SMC, resetting the PRAM, defraging my 1 TB internal disk, run Kaspersky, run Mackeeper, fixing permissions. I have done all of these multiple times without much improvement if any. There are times when I can type a sentence into mail and watch as the program runs one or two words behind my typing. I have 8 Gig of memory, 2.66 intel dual core. The rotating spere is my worse enemy and I am sick of it.
    I need to run Windows 7 in a paralles VM much of my work time. I use the computer for architectural work and I run an Autocad Program called Revit in the VM. Other times, I need to use Photoshop CS5 and Lightroom in the Lion enviroment. I never try any more to have the VM running and photoshop at the same time - I could go on vacation and back before I get the machine to respond in that circumstance. I have tweated the amouts of memory allowed to both without seeing any real change. I suspect at times video card problems but have turned off acceleration in the Autocad enviroment to get around it.
    The one thing that I haven't done and don't want to do is a clean install of Lion. This problem has been progressive and I doubt if the problem orginates with Lion but who knows? So I got this idea, I could install Lion on a cleaned 500 GB remote drive and then install Paralles and Windows 7 in that version of Lion. Then I could boot from the remote drive where there is nothing else installed and Paralles/Autocad/Lion would have total free access to all of the resources of the computer by itself. Do you think this will work? I realize that it would have no effect on the programs installed and their slow response time for the internal drive but I could almost live with that.
    If this improves proformance for Autocad on the remote drive, does that imply that a clean install of Lion on my internal drive would fix the current problems? I do not want to go to a windows POS to solve this problem with all of its inablity to start up and shut down and blue screens - been there, done that. But frankly, I'm not that far away from the same kind of time wasting computer issues with my Macbook.
    Any help will be appreciated and I am willing to try almost anything.
    steve
    If you note a tone of disperation in my comments - you got it right!

    joeroscia wrote:
    This didn't help....multiple folders.  Don't know what files or folders to select.
    Then you did not move iTunes as recommended in the link supplied above.
    Perhaps there is something here by turingtest2 that can assist you...
    https://discussions.apple.com/message/21374537#21374537

  • OSD: What is the difference booting into winpe from pxe/media and booting in winpe from OS/Vista?

    Hi,
    We have a task sequence issue. Please see
    http://social.technet.microsoft.com/Forums/en-US/56d783e3-214d-4027-84c1-c03cdf2013f1/osd-convert-boot-to-logical-path-failed-0x80070490-retrying-after-attempt-29-it-fails-and-says?forum=configmanagersecurity
    for more info. What I would like to know: what is the difference/is there a difference between:
    A.booting in PXE/bootable media to WINPE
    B.booting from OS (Vista) into WINPE => will this load the x86 boot image (it doesn’t look like it, I CAN see the image loaded ….wim is exactly the same when loaded from OS)
    The reason why I ask this: see link above: loading TS from PXE/media works fine, when choosing the exact same TS from WITHIN OS (Vista, 32 bit) the TS fails.
    Note: we set the ts step format system disk to NOT run if _SMSTSMediaType is OEMMedia (set in order to not format if prestaged media). So if for some reason this variable would be set booting TS from OS?
    Please advise.
    J.
    Jan Hoedt

    What I would like to know: what is the difference/is there a difference between:
    There is none.
    Starting a TS using Software Center will download the boot image that's assigned to the task sequence.
    PXE (depending on how many boot images are available on the PXE-enabled DP): the TS will use the boot image that's assigned to the task sequence (it will download that one and reboot into PE for a second time if the first boot image (see smspxe.log) does not
    match).
    P.S. Please don't post another question for the exact same topic. Thanks.
    Torsten Meringer | http://www.mssccmfaq.de

  • What are the different between Netflow protocols and Real Time Capture

    Hi Gurus,
    Let me know, if you have a link will be excelent, the different if we capture traffic in Real Time (using Spam Port) or export traffic by Netflow protocol.
    When I capture traffic and analysis it (using Wireashark or TCPDump) in Real Time I see in detail all data, but in Netflow I see statistic?
    Any other tip or link where could explian in detail, please?

    Capturing packets via a span port and inspecting with Wireshark or   any pcap analysis tools is looking at actual datagrams - the details are   much more indepth and detailed and you are not missing anything. You  see the actual IP conversations.
    NetFlow captures the  header information from each of the IP conversations  traversing your  networking device and allows for flow analysis tools to  decipher them  and display the results. With NetFlow, each IP  conversation is  represented in a flow with information about its source  and destination  IP Address, port numbers, protocol, ToS, etc. Now  remember, NetFlow is  not all sampled - It captures all the IP  conversation information.  There is also sampled NetFlow like Seb stated  in the previous reply,  but not all NetFlow is sampled. You can enable  sampling to capture 1 in  100 packets or 1 in x packets.
    A  simpler way to put it  is, consider a phone call. Packet capture is like  knowing who called  whom, how did they call, what did they use, when did  they call and also  get to know what did they talk about.
    NetFlow  is like your phone bill - you know who called  whom, when it happened,  how long they talked, etc., but you do not know  what did they talk  about.
    If you have a resource intensive network, capture NetFlow from all the nodes and do spanning from the most important interfaces.
    Regards,
    Don Thomas Jacob
    http://www.solarwinds.com/netflow-traffic-analyzer.aspx
    NOTE: Please rate and close questions if you found any of the answers helpful.

Maybe you are looking for

  • How to avoid 'for update' clause ?

    Hi All, I am trying to build the data-entry form based on complex view. I've got JBO-26080 Error while selecting entity... (ORA-02014 select ... for update). Is it possible to delete 'for update' clause in select ? What is the best practice to deal w

  • Need ipod help please windows to mac format !

    I bought a used 2gb ipod nano. When I plug it into the computer via usb, the warning sign comes on the ipod and it says to "do not disconnect" and it just stays like that. I looked on the account menu on the ipod and it shows "windows" format. I am t

  • How do I write to A-B PLC through 1761-NET-DNI?

    Thanks, Emilie, for your previous response.  I guessed that was the case, but as I'm new to DeviceNet, I was unsure. I am still having problems communicating with the Allen-Bradley PLC, and am not sure whether the problem is with my LabVIEW code or c

  • MIRO Urgent

    Hello together, At my client there is no Quality module in place. When i recd the material against PO then i recives it with movt type 101 in migo.( e.g. 10 qty ) Then i send this matl to QA dept. QA inspects it & if they found 5 nos qty. defects the

  • Where exactly are the media files kept now?

    It used to be simple, the media files were all in the Final Cut Events folders and if you trashed them they were gone. However, now that I have updated my 10.0.9 projects and events to 10.1,  I apparently have identical  media files in the "Old Final