What are the other 4 CD's for?

I'm installing Photoshop Elements. I know I have to start with disc 1, but what are the other 4 for?

Install Premiere Elements, Photoshop Elements
Mylenium

Similar Messages

How to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area. What are the other ways

I am a cityville game player on facebook and for some reason today I am unable to send out blasted on the game when if fact this was never a problem. Finally I went to internet explorer and the same problem happen, but internet explorer let me know that the content was blocked. All I had to do was unblock it and that was easy and know I can blast out. However trying to remove the block from fire fox is a issue. I went into to tools and removed every block and it still want work right. Therefore, how to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area under tools options. What are the other ways

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What are the Corresponding fields in CRM for sales order in ECC

HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
Mayank

Mayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com

What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly

Hi all,
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
Help will be surely rewarded.
Thanks and Regards,
Creasy

> What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
> Help will be surely rewarded.
&********************** Please read "the rules" if found usefull... ************************&
Cheers,
Julius

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the best books to purchase for pl/sql programming?

What are the best books to purchase for pl/sql programming?
I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
Thanks

In my opinion one of the best to start
Oracle PL/SQL Programming, Third Edition
Steven Feuerstein

What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?

What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?
I read an article and cannot find it that said something about trying to make it 2million pixels and JPG to keep it small, but what exactly should the dimensions be that I ultimately import? Is there some kind of a "density" setting I have to use, as well, when exporting from Photoshop, for example?

See Optimizing performance in your iBooks Author books
Density is discussed by Apple in this context as 'dpi'...
132 - iPad 2
264 - new iPad
At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
Good luck.
Ken

Hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.

What are the third party tools available for Encryption in Oracle database?

Dear All,
Can you please help me with the below question?
What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
1. Operating system
2. Database edition and version
3. What type of data needs to be secured
4. What level of security is required

What are the advantages of using ENC for a datasource

Other than eliminating a tight binding between a EJB and a datasource , what are
the other considerations and/or advantages of using JNDI ENC to define a datasource
reference vs a direct lookup of a Datasource in the EJB implmentation?
For example, are their performance advantages by the datasource being cached in
JNDI ENC?

Hello Bryan,
Basically the main advantage is to not have the tight coupling between the EJB
and the particular JNDI name that it's bounded to. Please refer to a previous
post where I addressed this issue (perhaps a few days ago on this newsgroup).
In addition, you will always gain performance improvements by caching the remote/local
home objects for your EJBs.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
"Bryan Boyer" <[email protected]> wrote:
>
Other than eliminating a tight binding between a EJB and a datasource
, what are
the other considerations and/or advantages of using JNDI ENC to define
a datasource
reference vs a direct lookup of a Datasource in the EJB implmentation?
For example, are their performance advantages by the datasource being
cached in
JNDI ENC?

What are the allowable dimensions of screenshots for ibooks?

What are the allowable dimensions of screenshots for ibookes? I know the requirement is very specific.
And what is the best tool to do so? I tried to use the native screenshot tool but it is hard to make the size precise.

Minimum size is 600 pixels in the shorter dimension. Maximum size is 2048 pixels in the longer dimension. That's what you get when you take a screenshot on a new iPad. (There is no point in having something larger than this.) Screenshots taken with an older iPad are 1024x768.
For my book, I just took screenshots on an iPad 2 (1024x768) and used those. They were accepted without complaint.
Michi.

What are the defaul username and password for SQL Plus ?

hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1

You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
When you install it, you'll be given several options about the type of database you want.
But before you install anything, you should read the installation manual for your platform.

What are the available software and apps for ipod nano

what are the available software and apps for ipod nano

saif78 wrote:
what are the available software and apps for ipod nano
Sorry, but Apps are not compatible with the iPod and there is no additional software available for it.
B-rock

What are the other tables in B2 cluster

hi experts,
what are the other tables like ZL table in B2 cluster..and what data is stored in them.

Results related to a time evaluation period in cluster B2
PSP
Personal work schedule
Time evaluation result
For each day
QTACC
Generation of quota entitlement
Time evaluation result
For each day
QTTRANS
Transfer pool
Time evaluation result
For each day
ZES
Time balances for each day
Time evaluation result
For each day
SALDO
Cumulated time balances
Time evaluation result
Time evaluation period
ZL
Time wage types
Time evaluation result
For each day
VS
Variable balances
Time evaluation result
For each day
CVS
Cumulated variable balances
Time evaluation result
Time evaluation period
FEHLER
Messages
Time evaluation result
For each day
PT
Time pairs
Raw data/time evaluation result
For each day
KNTAG
Core night work (relevant only for the German country version)
Time evaluation result
For each day
Results related to a time period in cluster B2
Table
Description
Origin
Time Dependency
VERT
Substitutions
Copy of infotype 2003
Period
ABWKONTI
Absence quotas
Copy of infotype 2006
Period
AB
Absences
Copy of infotype 2001
Period
ANWES
Attendances
Copy of infotype 2002
Period
RUFB
On-call availability
Copy of infotype 2004
Period
MEHR
Overtime
Copy of infotype 2005
Period
ANWKONTI
Attendance quotas
Copy of infotype 2007
Period
SKO
Time transfer specifications
Copy of infotype 2012
Period
ALP
Different payment
Raw data
Pointer to table entry
C1
Cost distribution
Raw data
Pointer to table entry
Edited by: BALAPANI on Oct 19, 2009 10:38 AM

What are the other 4 CD's for?

Similar Messages

Maybe you are looking for