What are the "other" files? I Have 4 gigs

I only have 16GB to begin with, so 25% to "other" not . Any ideas on how to get rid of them?

Thanks for that info. Unfortunately my connection with the iphone servers is really slow. It is telling me the software will take 10 hours to finish. Not sure what is going on there. I will let you know if it works.

Similar Messages

  • What are the "other" files on the hard drive and how can I reduce them

    Advice please - what are the "other" files on my hard drive and can I reduce or clear them  - currently taking up over 90 gig of disk space

    WZZZ wrote:
    "Other" than what?
    In About This Mac > Storage -
    ...the yellow stuff.
    I believe "Other" is primarily System and System-related files.

  • What are the "other" files on my macbook air HD? They are taking up 52 of the 60gbs. How do i erase these?

    My macbook air has a 60gb HD that is currently full. 51 gb is "other" What in the world do i do to fix this?

    See here for answer:
    http://pondini.org/TM/30.html
    and here:
    http://pondini.org/OSX/DiskSpace.html  

  • The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes  doesn't accept my command and start clicking itself.what is the problem and how to fix it?

    If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
    I have read that the battery can swell and that would put pressure on the trackpad.

  • What are the Jar files required,that for accessing the Type 4 Drivers.

    what are the Jar files required,that for accessing the Type 4 Drivers.
    Regards,

    Well it is Database Specific.
    Howevr there are few 3rd party .jar (Derby) which you can use it for accesing some standard databases.

  • How to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area. What are the other ways

    I am a cityville game player on facebook and for some reason today I am unable to send out blasted on the game when if fact this was never a problem. Finally I went to internet explorer and the same problem happen, but internet explorer let me know that the content was blocked. All I had to do was unblock it and that was easy and know I can blast out. However trying to remove the block from fire fox is a issue. I went into to tools and removed every block and it still want work right. Therefore, how to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area under tools options. What are the other ways

    Hello,
    Thank you for your post.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What are the other 4 CD's for?

    I'm installing Photoshop Elements. I know I have to start with disc 1, but what are the other 4 for?

    Install Premiere Elements, Photoshop Elements
    Mylenium

  • What are the other tables in B2 cluster

    hi experts,
    what are the other tables like ZL table in B2 cluster..and what data is stored in them.

    Results related to a time evaluation period in cluster B2
    PSP
    Personal work schedule
    Time evaluation result
    For each day
    QTACC
    Generation of quota entitlement
    Time evaluation result
    For each day
    QTTRANS
    Transfer pool
    Time evaluation result
    For each day
    ZES
    Time balances for each day
    Time evaluation result
    For each day
    SALDO
    Cumulated time balances
    Time evaluation result
    Time evaluation period
    ZL
    Time wage types
    Time evaluation result
    For each day
    VS
    Variable balances
    Time evaluation result
    For each day
    CVS
    Cumulated variable balances
    Time evaluation result
    Time evaluation period
    FEHLER
    Messages
    Time evaluation result
    For each day
    PT
    Time pairs
    Raw data/time evaluation result
    For each day
    KNTAG
    Core night work (relevant only for the German country version)
    Time evaluation result
    For each day
    Results related to a time period in cluster B2
    Table
    Description
    Origin
    Time Dependency
    VERT
    Substitutions
    Copy of infotype 2003
    Period
    ABWKONTI
    Absence quotas
    Copy of infotype 2006
    Period
    AB
    Absences
    Copy of infotype 2001
    Period
    ANWES
    Attendances
    Copy of infotype 2002
    Period
    RUFB
    On-call availability
    Copy of infotype 2004
    Period
    MEHR
    Overtime
    Copy of infotype 2005
    Period
    ANWKONTI
    Attendance quotas
    Copy of infotype 2007
    Period
    SKO
    Time transfer specifications
    Copy of infotype 2012
    Period
    ALP
    Different payment
    Raw data
    Pointer to table entry
    C1
    Cost distribution
    Raw data
    Pointer to table entry
    Edited by: BALAPANI on Oct 19, 2009 10:38 AM

  • What are the iphoto files I need to restore iphoto library deleted from drive

    A few days ago my hard drive started making noises and I was getting all sorts of errors.  I even got errors trying to do a time machine backup with the final error being "backup failed".
    Earlier last week I imported a couple hundred photos of my kids from Christmas to present which also included our vacation last month.  I deleted the photos from my camera after the import.  Then foolishly, I didn't think to do any time machine backups between then and the time my hard drive started making noise.
    I bought a new SSD drive.  I could still access the bad drive so I moved my pictures directory from the bad drive to the new drive.  It took nearly two hours.  It appeared to have moved everything, but it did not move the iphoto library.  The pictures directory is gone from the old hard drive. 
    I purchased FileSalvage and recoved thousands of deleted jpg files from my old drive, but none appear to be the pictures I lost. 
    It appears that FileSalvage will recover specific file types.  There doesn't seem to be a way to just tell it to recover the deleted "pictures" directory or recover "iphoto library".
    If I was able to specify specific file names to restore, what files would I even need to specify?   I have iphoto 11. 
    I came across an article about iphoto library files from iphoto 6 and previous versions which explained the following iphoto files: library.iphoto6, albumdata.xml, Thumb32Segment.data, Thumb64Segment.data, ThumbJPGSegment.data, etcxxxxx.
    mmm
    Does iphoto 11 use similar file names?  I'm not concerned with keeping my iphoto database in tact.  I just want my pictures.
    Maybe I'm asking the wrong question.  Any advice on how to get my pictures back would be greatly appreciated.
    Thanks!!
    MH

    Simply, you can't recover the iPhoto Library. What you need to do is try recover the Photos that were in it. These will be saved as jpeg files* and that's what you need to search for. Recovering all the other files will do no good. You won't be alble to reconstruct the Library. Your aim is to get the Photos and then start over.
    The search may find many files of the same name, try to recover the largest files - they are most likely to be your originals.
    Regards
    TD
    *Assuming you're not shooting Raw. If you are shooting Raw then you'll know the suffix for your camera. If none of that makes sense then you're not shooting Raw

  • What are the data files in the Proxies folder?

    In the iMovie Projects folder tree there are folders called Proxies. In that folder there is a folder called the name of the projects events folder, twice, with %20 for spaces and such. In that folder there are a large number of data files like 2010.data and such. What are these data files? In one case there are 861 of them and they take up 5.1 MB. Thanks.

    betaneptune wrote:
    An iMovie project is a bundle?
    Yes. What appears in the Finder as a singel file is really a bundle of files.
    But what are they?
    I can't tell you exactly - but I'm sure there's data there that allows iMovie to undo things you've already done, references the event clips used in the movie, thumbnails, backups, transitions you've used - that kind of thing.
    I deleted them on a junk project and so no ill effect, though I didn't check all the things you can do with a project.
    Even so, I'd restrict that kind of experimentation to junk projects.
    Regardless of whether it's safe to delete them, I'd like to know what they are.
    Fair question. I wish I could tell you more.
    Matt
    Message was edited by: Matthew Morgan

  • What are the software required to have planning in my PC

    Hi ,
    I am planning to install "Hyperion planning" in my PC. Can any one suggest me what are the software i required to install the planning in my PC and let me have the clear information about installation process for each software.Please advice guys...
    Note : Please include the version also
    Thanks & Regards,
    Prabhas

    There are three ways to do this:
    1) Install a server OS on the laptop. I tried this on an 8 gigabyte laptop and ran out of RAM for all of the things I wanted to do (SS, Calc Mgr, Essbase, EAS, APS, FDM, Financial Reporting, Planning, etc.).
    2) Go to a VM solution, such as VMWare (I like VM Workstation, personally). Watch out for this on memory as 8 gigabytes isn't going to be enough. The Great and Good John G has recently published notes on how to set up 11.1.2.1's compact deployment mode. That might work in a laptop (yes, you wrote PC but nowadays that so often means laptop) -- I have yet to try it but have high hopes.
    3) Go to the cloud. I personally prefer this as it is so easy and fast although you are paying a per-hour charge. Check out John Booth's blog: www.metavero.com for more details -- his blog links to mine for the instructions on how to launch that first EPM AMI.
    Regards,
    Cameron Lackpour

  • What are the Jar Files required in  J2EE?

    What are the jar s required to work with JMS, Java Mail API and Web Services. (Complete J2EE).

    Depends on your app server. So check with app server

  • What are the folder/file names of PSE12 catalogs?

      I'm curious about what files/folders are created by PSE 12 when setting up the original catalog and then each subsequent catalog.  Also, what files/folders are created for the PSE backup and is there a default folder/file structure tied to the catalog - or is it wholely separate?

    LinusF wrote:
    I "know" about the Program Data ....catalogs/[my catalog] location.  Is there any file necessary to the catalog which is NOT there?
    The catalog folders contain everything that is necessary for the organizer. The only thing you might consider is to take a note of your preferences settings. The backup folders also contain everything necessary; the only difference is that it may take some time to rebuild the 'cache' files automatically after the restore.
    Put another way, I am moving many, many files off my current C: drive in order to install an SSD.  I want to make super sure that I catch everything PSE may have stashed here and there and get it out to "safety" before reformatting this disk.  Thanks for all the help you've been along the line.
    The backup and restore process is highly recommended in your situation, but generally it's not the only way to 'move' catalogs and media libraries. Let's say you have all your media files under a single master folder such as 'My photos', you can use the Folder view (left panel) to drag and drop on another external or internal drive. Your catalog is then updated for the new location.
    - advantage : you can check the transfer immediately
    - drawback : you must be patient...
    That's for transferring your media library, now you can also move your catalog folder, either manually or by using the catalog manager 'move' option.
    So, the backup/restore process is not the only way.
    If you want to keep only your Elements program on the SSD, I would not store the catalogs there, I'd store the catalogs in custom location in your old reformatted internal drive. You'll need an external drive for the backup. Alternatively, you could move library and catalogs to the external drive, and back to the old reformatted drive as explained above. You might even use the external drive for both purposes...

  • Sluggish and then (Not Responding) in RH 8 -- what are the lilo files?

    RH 8 has had severe performance problems with a particular Help Project for the past few days:
    like 3 or 4 words behind my typing.
    not even opening a topic if I click on it
    not closing any of the open topics when I click the X in the topic tab
    Today when it quit working altogether and sent a log file off to Adobe, I peeked into the content before it was sent. I'm using version 8.0.0.203
    Further, a temp directory has 1.35 mb in 178 files all of which read lilo<7-digit number>, all of which were generated today. I know because yesterday I cleaned out my temp directories...including thousands(?) of lilo1515548 files, and today, with virtually no "work" accomplished (outside of publishing to a different server location),  I have a whole new crop. The guts of these files is machine code (squiggles, with telltale references to ColdFusion, JobReady, RoboHelp,RoboInfo,FreeHand, FrameMaker,Homesite,LiveCycle,Flashcast,PostScript etc.). The only Adobe product I have installed* and am using is RoboHelp 8. It makes me wonder...what's going on with RH? Are there product updates I don't know about?
    *except, of course Adobe Reader, but I'm not using that.
    Does RH 8 'get sick' (I am working on a project I created with a try-b4-u-buy version of RH 7. Is this causing the hiccup?
    I found PeterG's suggestion to add the BaseCSS_res.dll to my RH ...\RoboHTML\en_us folder. And that helped A LOT! But I want to know how to address the lilo files that are growing like cancer in my temp folders.
    PS: I cross posted this because the first and only Adobe hit for 'lilo' was in the InDesign SDK. So I posted there first. But, since I'm not using that product nor doing SDK stuff, I'm adding this to the RH user group.

    Hi there
    Where are your projects when you are working on them? Have you applied the patches to version 8? (There have been two released)
    If you say your projects are on a local area network drive, there's your issue. Move them to your local C drive and stand in awe of the speed improvement. (not to mention reliability)
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • What are the blob files on the agents?

    Question:
    In /opt/local/aduva/director_agent/blobs/
    There are multiple files with the suffix .blob
    What are they?
    Answer
    The blob files are the actual software packages downloaded by the UCE server from the Universal Software Component Repository. This occurs once you have approved the installation of a component and are not downloaded again if they are present in the appropriate directory.
    This may be Solaris patches or RPM files depending on the managed channel of that host.

    To see what the file is type on the command line
    file xxxxx.blob where xxxx is the name of the blob. the file command will return the name of the rpm or that the file is a script.

Maybe you are looking for

  • Video Conferencing with NX Pro?

    Just got an NX Pro Webcam from my son and daughter-in-law for Christmas, and seem to have hooked it up without a problem. Can't figure out how to Video Conference with it, however. He has one as well, and that's what we'd like to be able to do. What

  • Syncing from iTunes to iPad deletes content from iTunes

    I recently bought three TV series to watch while going away for a few days. They downloaded fine to my iTunes Library and I synced them to my iPad. I watched them on my iPad through ATV2 and today I went back to the iTunes library only to find that n

  • Reason Code for Reversal

    Dear Experts, When I am doing reversal of any document using FB08, I am giving reason code as Cheque Bounce or some other reason code. But when I am viewing the same document, the reason code is not available. I have checked the same in BKPF but the

  • Can I generate .hlp files

    We just upgraded to Frame 9 (from 7.1) and RoboHelp 8. Prior to the upgrade, I was using WebWorks to generate my .hlp files - is there a way to generate .hlp and .cnt files with RH8? Thanks in advance! Debby

  • How to unzip the xlWebApp.war

    Experts, I need to do some customization(like message on home message and some error messages) in OIM. For the xlWebApp.war needs to be unzipped. How to do this? I am doing this with flowing option 1. Make the extension as .zip and then extracting. 2