What are the penaltys to operating lion from a remote drive?

My Macbook pro with Lion installed is runing slower and slower and I have tried all of the fixes that I can find on the internet including, clearing the SMC, resetting the PRAM, defraging my 1 TB internal disk, run Kaspersky, run Mackeeper, fixing permissions. I have done all of these multiple times without much improvement if any. There are times when I can type a sentence into mail and watch as the program runs one or two words behind my typing. I have 8 Gig of memory, 2.66 intel dual core. The rotating spere is my worse enemy and I am sick of it.
I need to run Windows 7 in a paralles VM much of my work time. I use the computer for architectural work and I run an Autocad Program called Revit in the VM. Other times, I need to use Photoshop CS5 and Lightroom in the Lion enviroment. I never try any more to have the VM running and photoshop at the same time - I could go on vacation and back before I get the machine to respond in that circumstance. I have tweated the amouts of memory allowed to both without seeing any real change. I suspect at times video card problems but have turned off acceleration in the Autocad enviroment to get around it.
The one thing that I haven't done and don't want to do is a clean install of Lion. This problem has been progressive and I doubt if the problem orginates with Lion but who knows? So I got this idea, I could install Lion on a cleaned 500 GB remote drive and then install Paralles and Windows 7 in that version of Lion. Then I could boot from the remote drive where there is nothing else installed and Paralles/Autocad/Lion would have total free access to all of the resources of the computer by itself. Do you think this will work? I realize that it would have no effect on the programs installed and their slow response time for the internal drive but I could almost live with that.
If this improves proformance for Autocad on the remote drive, does that imply that a clean install of Lion on my internal drive would fix the current problems? I do not want to go to a windows POS to solve this problem with all of its inablity to start up and shut down and blue screens - been there, done that. But frankly, I'm not that far away from the same kind of time wasting computer issues with my Macbook.
Any help will be appreciated and I am willing to try almost anything.
steve
If you note a tone of disperation in my comments - you got it right!

joeroscia wrote:
This didn't help....multiple folders. Don't know what files or folders to select.
Then you did not move iTunes as recommended in the link supplied above.
Perhaps there is something here by turingtest2 that can assist you...
https://discussions.apple.com/message/21374537#21374537

Similar Messages

What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20? Question I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20? Answer Please see

What are the supported Macintosh Operating System versions for IBM SPSS Statistics 18,19 and 20?
Question
I would like to know what are the supported Macintosh Operating system versions for IBM SPSS Statistics versions 18, 19 and 20?
Answer
Please see the list below:
- IBM SPSS Statistics 18 and 19 releases are supported on Apple Macintosh OS 10.5 (Leopard) and 10.6 (Snow Leopard) with Intel processor.
- IBM SPSS Statistics 20 release is supported on Apple Macintosh OS 10.6 (Snow Leopard) and 10.7 (Lion) with Intel processor.
- The IBM SPSS Statistics versions 18 and 19 are not supported on Mac OS 10.7 (Lion).
THIS MEANS THAT TO USE LION ONE FIRST HAS TO UPGRADE TO SPSS STATISTICS 20.

Whilst the 2012-02-15 edition of IBM's matrix does not mention Lion, a few users have noted that:
• 18.0 can be troublesome
• an updated version of 18.x should be better.
Related files
PASWStatistics_1 803_Mac_Patch.dmg and IBM SPSS Statistics 18.0.3.4 Hotfix Mac.zip are no longer available from the spss.com domain, and I could not find them in an IBM domain. If you download from unofficial sources, proceed with caution.
Related pages
In Apple Support Communities:
• will PASW (SPSS) 18 work with LION
• PASW statistics 18 crashes every time
• Java Virtual Machine & SPSS 18 with a question from me.
Elsewhere:
• SPSS on Lion « Decorator Pattern
• SPSS / PASW Mac Patch 18.0.3 and Graphing Fix | The Personal Website of Philip Fizur
• Patching PASW 18 (or SPSS 18) for Mac OS X (Leopard, Snow Leopard, Lion) to version 18.0.3.1
• and other sources, including one domain that I treat as reputable but I'll respectfully not share that link here.
At a glance, you might find that 18.0.3.4 is compatible with Lion.

What are the ways to download data from ods?

Hi all,
what are the ways to download data from ods?
1. se11/se12
2. listcube
3. infospokes.
Apart from the above 3 is there any other way to download data from my ods.
I need to download around 90 fields from my ods to a flat file. But listcube doesnt allow me to select all the fields. So i used se11 to download the data from my ods. bUt still se12 doesnt allow me to download all the 90 fields it downloads only 40 fields.
Can anyone suggest me how to select all the 90 fields and download it to an excel sheet.
thanxs
haritha

Hi Haritha,
Go to Tcode SE16, give your ODS active Table name and give width of output list as 1023.
Now run transaction to see your data and then click Settings --> User parameters and Select ALV Grid Display.
Now you should see and Excel Icon on top, click on it then select Table , then
Microsoft Excel and it will open your data with all columns you want.
I just tried for 213 columns
Hope this helps.
Thanks
CK

What are the idoc to send data from sap hr to sap fi

what are the idoc to send data from sap hr to sap fi

Message type of IDoc depends on the data you wish to send.
please detail on the data that you need to send in the IDocs.
regards,
Nitin

What are the pros and cons of a solid state drive for imac?

What are the pros and cons of a solid state drive for imac?
I wonder if the SSD is good for replacing a failing hard drive?

However they are dramatically faster than magnetic disk drives, useful for startup and shutdown and frequently accessed apps and fi.e

What are the methods called while navigating from one applet to another one

Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.

http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100

What are the book names for MDM from SAP Education academy

Hi SAP gurus,
Can any one tell the name of the books for MDM from SAP Education academy.
For example in SAP MM (material management) - it is TAMM40(part1,part2,part3,paret4...etc)
So what are the names of the books for MDM from SAP Education academy. Just name and other deails enough.
Thanks in advance.
Vam C

Hi Vamsay,
I am sending you some books names of SAP MDM.
1. SAP MDM Frequently Asked Questions (English)
(Master Data Management Certification Sap Mdm Faq - ISBN: 9781603320153)
Price range: $42.00 - $54.95 from 4 Sellers
Publisher: Equity Pr
Format: Paperback
2. Build Foundations for Continual Improvements with SAP MDM
Enterprise Data Management with SAP NetWeaver MDM
Andrew LeBlanc
3. English Edition
Auszug aus:
SAP NetWeaver Master Data Management
ISBN 978-1-59229-131-1
lieferbar EUR 69,95 CHF 115,00
[In den Warenkorb] [Auf den Merkzettel]
Please rewrds if found helpful.
Regards,
Alok

What are the reports we can get from OPM Quality

Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
Jon

Pl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

What are the recommended steps to upgrade from CF7 to CF8

I have read all of the documentation for how to upgrade from
CF 7.02 to CF 8. Well there is actually only one blurb in all of
the CF docs.
"Upgrade installation You can upgrade from ColdFusion MX,
ColdFusion MX 6.1, and ColdFusion MX 7. When upgrading from
ColdFusion MX, ColdFusion MX 6.1, or ColdFusion MX 7, the installer
preserves the existing settings and installs in a new directory,
automatically assigning ports that do not conflict with the
existing installation."
OK that sounds simple enough, so i went ahead and installed
it. Well it did not work, now I am stuck somewhere between 7 and 8.
My basic step, as I can best recall at 1:00AM.
* Select Multi server Configuration
* Select install path, I used D:\JRun4
* This is where my existing cf7 install was located
* installer told me port 8300 was being used so it gave me
port 8306 instead
* Selected d: for ColdFusion8DotNetService install path
* Select Passwords for admin and rds
* installed cf
* received error after install
(Adobe_ColdFusion_8_InstallLog.log)
ANT Script Error:
Status: ERROR
Additional Notes: ERROR - jrun.xmlUnable to remove existing
file D:\JRun4\bin\jrun.exe
* rebooted
* can't login to cfadmin at port 8306
* tried to login to cfadmin at port 8300, everythin works
* it appears the cf7 services are still running,
* didn't notice any new cf8 services, excpet the dotnet
stuff
Any assistance would be appriciated.
I am on windows 2003/CF8EE/Multiserver configuration

A_B wrote:
> I have not seen anything come out from Adobe on this
subject but I did talk to
> two of the CF engineers at the Max Conference regarding
this issue. I spoke
> with Dean Harmon and Tom Jordahl about this issue. Here
are the basic take
> aways from what I recall. I have not yet attempted this
but will be sometime
> in the next month or two. There are a few options but
basically JRUN is an
> updated version with CF8 and there is a new JRE that it
runs on
Essentially CF comes with the updates that will become JRun 4
Updater 7
integrated into it. (The beta of Updater 7 is under way).
> - Backup existing JRUN directory (c:\JRun4 or whatever)
completely.
> - Make a backup of all the existing CF settings via a
CAR file in the CF admin.
> - Do an uninstall of your CF7 installation. This goes
against my better
> judgement since you should not need to uninstall 7
before installing 8 since
> there should be an upgrade path. I understand that there
are differences with
> JRUN etc ... but this should be done via an install.
> - Install CF8 and then restore your settings via the CAR
file. If you are
> crafty enough I believe you can also bring back all the
XML files and set a
> flag to let the CF admin to an upgrade.
Use the CAR file, XML file formats have changed between
versions.
> I want to also note that this is for the multi-server
install on top of JRUN
> in which you already have JRUN installed with CF7. I'm
surprised that Adobe
> has not released better instructions on how to do this
but they haven't and
> they seem to have let us to try to figure this out which
is completely wrong of
> them. How hard is it to write up a tech article.
What you are describing is a simultaneous update of JRun and
CF. For
just an update of CF you need to redeploy the CF EAR file as
described
in the JRun manual. For just an update of JRun you have to
wait until
updater 7 is released (or join the beta and file bugs if you
don't like
the procedure).
> Another possible option would be to update JRUN with the
latest release,
The latest release is only updater 6.
> download the latest JRE and create a custom jvm.config
file to use for the new
> JRE. Then you would create a new instance of JRUN using
the JRUN console and
> deploy a CF8 EAR/WAR file to it. You still then have the
issue of getting
> settings and things transferred.
Use a CAR file for that.
> This seems possible to do it this way but does not seem
as clean at all.
In place upgrades are never clean. In my book, an upgrade
means
rebuilding from scratch.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

What are the essentials needed before upgrading from call manager 9.1.1 to call manager 9.1.2?

I recently tried to upgrade my call manager in a lab environment from 9.1.1 to 9.1.2 but failed. The error stated that connection had been lost after 2 hours into it. Connect using CLI. Any help would be greatly appreciated.
Steve

You mean via GUI??
What does the upgrade status via CLI says??

What are the system requirements for Lion?

Have the system requirements for Lion been posted anywhere?

This is from the Apple Lion site:
Step 1:Make sure your Mac can run Lion.
Your Mac must have an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor to run Lion. Find out if your current Mac has one of these processors by clicking the Apple icon at the top left of your screen, then choosing About This Mac.
Step 2:Make sure you have the latest version of Snow Leopard.
Get up to date with the latest version of OS X Snow Leopard to purchase OS X Lion from the Mac App Store. If you have Snow Leopard, click the Apple icon and choose Software Update to install the latest version.

What are the best practices in upgrading from mac OS 10.5.8 to Mountain Lion?

I what to upgrade two iMac's from 10.5.8 to Mountain Lion. I have the harddrives backedup. I also have Snow Leopard family pac on disc.
I want to know the best way to upgrade and get a clean install of the new OS.

First check that the Macs will run Mountain Lion.
Then install Snow Leopad
Update to 10.6.8 for App Store needed for Mountain Lion
Using App Store purchase, download and install Mountain Lion.
Allan

What are the values for operation code in order import open interface

Hi,
I am trying to create the sales order by populating the interface table and run the request import order i.e. open interace without standard OE APIs.
I am also populating the actions interface table i.e. OE_ACTIONS_IFACE_ALL along with header, line, & price adjustment tables to hold the order. The sales order creates successfully but it fails at holding action due to invalid operation code. It has been tried with ‘CREATE’, ‘UPDATE, ‘INSERT’ for operation code in action interface table but no use.
So my concern is what value needs to pass for operation code in action interface table.
Any help would appreciate.
Thanks,
Sai Krishna

If you are planning to apply holds, For holds the action is OE_Globals.G_APPLY_HOLD or APPLY_HOLD.
Thanks
Nagamohan

What are the settings for capturing video from Canon HV20

Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.

HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR

What are the hours of operation for phone support? I cannot find them and the phone system just says between regular hours?

My patience has been pushed to its limit with this iPod and I cannot find hours of operation for customer service and tech support and the phone system just tells you no one is available and call back during regular hours, but nothing saying what those hours are. Does anyone know?

Looking at the Apple's website and previous posts, Apple does not publish the hours. Did you can in the USA during the times that corresponsd to about 9AM to 4PM Pacific time?

What are the penaltys to operating lion from a remote drive?

Similar Messages

Maybe you are looking for