What are the permitted compression techniques for PDF/A-1?

The PDF/A-1 standard does not specify how compression is performed. What are the permitted compression techniques for PDF/A-1?
The information I have gathered (not sure if all are true)
LZW should not be used
JPEG2000 may not be used
Few say, JPEG can be used but its a lossy compression. (PDF standard clearly states lossy compression can't be used)
Also, how to figure out whether a particular file is PDF/A-1a or PDF/A-1b and what kind of compressions are used in that file?
Thanks in advance.

For better or worse, ISO specifications are written in a language from a parallel universe. After dealing with ISO standards for a while, you learn what specific words really mean. I should know - I am chair of the ISO PDF/X task force and co-chair of the PDF/VT task force.
The word should does not specify a requirement. PDF/A does not prohibit lossy compression.
JPEG is always a lossy compression. There is a mode of JPEG2000 compression that is indeed lossless. Note that JPEG and JPEG2000 are totally different compression schemes. (I believe that PDF/A-1 as well as PDF/X-1a and PDF/X-3, based on older versions of the PDF specification do not permit JPEG2000. PDF/A-2 based on ISO32000-1 and PDF/X-4 based on PDF 1.6 do allow for JPEG2000.)
ZIP compression is lossless.
- Dov

Similar Messages

What are the File Compressions Softwares for mac

Im looking for some zip softwares that i can use with mac osx 10.4 software, i realized that winzip is only for windows based os, but what can i use for the mac to open up zipped files and also be able to zip files to upload.

Zip is built-in to OSX. Double-Click a .zip file to unzip it. To compress (Zip), select some files or folders, Right-Click (Cntrl-Click), and choose "Make Archive".

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

What are the advantages and disadvantages for the larger blocksize and for

What are the advantages and disadvantages for the larger blocksize and for the smaller blocksize?

Smaller blocksize
Advantages
GoodHas relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block, for small rows with lots of random
access.
Reduces block contention.
Disadvantages
Has relatively large space overhead due to metadata
(that is, block header).
Not recommended for large rows. There might only
be a few rows stored for each block, or worse, row
chaining if a single row does not fit into a block.
Larger blocksize
Advantages
Has lower overhead, so there is more
room to store data.
Permits reading a number of rows into
the buffer cache with a single I/O
(depending on row size and block size).
Good for sequential access or very large
rows (such as LOB data).
Disadvantages
Wastes space in the buffer cache, if you are doing
random access to small rows and have a large block
size. For example, with an 8 KB block size and 50
byte row size, you waste 7,950 bytes in the buffer
cache when doing random access.
Not good for index blocks used in an OLTP
environment, because they increase block contention
on the index leaf blocks.

What are the naming convention rules for BAPI and types

what are the naming convention rules for BAPI
points will be rewarded,
thank you,
Jagrut BharatKumar Shukla

Hi,
plz go through the following links....
Business application Prograaming Interface is nothing but the Method of a Business object.
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
u can check the below the material also
what is BAPI?
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
http://help.sap.com/saphelp_nw2004s/helpdata/en/7e/5e114a4a1611d1894c0000e829fbbd/frameset.htm
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
***do reward if usefull
vijay

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

What are the master data tables for 'Plant'?

Hi friends,
What are the master data tables for 'Plant' that contain below data?:
PLANT
NAME1
NAME2
LANGUAGE
HOUSE_NUM_STREET
PO_BOX
POSTAL_CODE
CITY
COUNTRY_KEY
REGION
COUNTRY_CODE
CITY_CODE
TIME_ZONE
TAX_JURISDICTION
FACTORY_CALENDAR
Thanks a lot!

Hi,
Plz try out following tables for your requirement.
TOO1W
ADRC
J_1IMOCOMP
T001W : werks TYPE t001w-werks, "PLANT
        name1 TYPE t001w-name1, "PLANT DESCRIPTION
        adrnr TYPE t001w-adrnr, "PLANT ADDRESS NUMBER
ADRC: addrnumber TYPE adrc-addrnumber, "ADDRESS NUMBER
         str_suppl1 TYPE adrc-str_suppl1, "STREET2
         str_suppl2 TYPE adrc-str_suppl2, "STREET3
         street TYPE adrc-street,          "STREET
         city1 TYPE adrc-city1,            "CITY
         post_code1 TYPE adrc-post_code1, "CITY POSTAL CODE
         post_code2 TYPE adrc-post_code2, "PO Box postal code
         tel_number TYPE adrc-tel_number, "TELEPHONE NUMBER
         fax_number TYPE adrc-fax_number, "FAX NUMBER
         str_suppl3 TYPE adrc-str_suppl3, "STREET4
         location TYPE adrc-location,      "STREET5
         city2 TYPE adrc-city2,
For Tax Details :
J_1IMOCOMP :   werks TYPE j_1imocomp-werks,
                          j_1icstno TYPE j_1imocomp-j_1icstno,
                          j_1ilstno TYPE j_1imocomp-j_1ilstno,
Hope this will help.
Regards,
Archana

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the cause and fix for the following error message? NS_ERROR_FILE_ACCESS_DENIED failure code: 0x80520015

Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined

Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined

What are the scaling co-efficients for Accelerometer input in Daq-mx ?

hi
im using daq-mx to take accelerometer input.
i want to read the raw data and scale it myslef later.
i want to know what are the scaling co-efficients for the accelerometer input in daq-mx and what is the process of determining them.
thanks.

Rahul,
I've answered your question in another thread you can check using the
following link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=14353
I hope this helps answer your question.
Jason

What are the minimum system requirements for GB 4?

What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
(I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
Click Here
Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

What are the real minimum requirements for Mountain Lion?

What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

What are the best plug ins for iMovie 11 running on Lion?

What are the best plug ins for Imovie 11 or Imovie HD running Lion? Especially transitions & effects for still pictures.
Thank you

Hi
For iMovie'08 to 11 - There are no Plug-ins - not supported at all
iMovie HD (in reality HD5) - doesn't work under Mac OS X.7 - at all
iMovie HD6 - can take Plug-ins and run under Mac OS X.7 - BUT some of the Plug-ins doesn't work under X.7
old list on - Plug-ins - Only relevant to iMovie HD6 (May be they are too old)
Stupendous software
www.stupendous-software.com
GeeThree
www.geethree.com
cf/x.
www.imovieplugins.com
Apple
www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
www.imovieplugins.com/fxhome.html
fxStabilizer - for iMovie - Google it
Yours Bengt W

What are the two different rules for organizational data determination

What are the two different rules for organizational data determination???

Hi
1) Rule type Responsibilities
want to determine organizational data for individual responsibilities
have not created an organizational model but want to create one
have a lot of organizational units and must only assign a few attributes
2) Rule type Organizational Model
You would use rule resolution using organizational model if you
have created an organizational model or have distributed a plan to SAP CRM and also want to use this for determining organizational data
assign a lot of attributes to the organizational units and these are to be evaluated
Regards
Manohar

What are the video card requirements for running a 23" cinema display

What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XP

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

What are the permitted compression techniques for PDF/A-1?

Similar Messages

Maybe you are looking for