What are the possible effects of changing regions on your apple ID?
Hi,
I'd really like to know the possible effects of changing regions on one's apple ID. I've recently changed mine to UK's from Tanzania's - and I've provided a valid payment but the problem is on my recent downloads from that Tanzanian apple ID. I can't seem to get the updates on my apps anymore.
Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it
Similar Messages
-
What are the bad Effect of changing sap Standard Programs?
Hi all,
I want to know what are the Bad effects of changing SAP standard screen and reports.
I need a bit theoretical Explanation.
Please suggest me some good and effective matter link.
RegardsHi sonal,
If I write the theory here ,might be its going to mess up here.mm..try this link.There are good information in changing a standard functionality.
http://software.feedfury.com/content/28535477-changing_the_sap_standard.html
2. I can tell one of like ...
To change a standard program or functionality or standard field in sap,we have to go for related user,customer scvren exit etc.
We have to find the right exit to that particular transaction and do our customized coding there.We have to be very careful,since we are going to change the standard exit.this user exit will be used in 'N' number of other screens and transaction.So when you change , that change will /may affect the other transactions also.If you corrupt that particular exit,there are chances for that transaction to go for a toss.I have experianced this personally.when I was working on particular userxit and editing,that particular transaction was not working properly for others,since i was doing from my login,everyone came to my place and started bugging me to stop working on it:)
Regards,
SanthoshSivanathan -
What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel
If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock. -
The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?
Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees. -
What are the possible solutions..?
I have a column in a database table of type LONG RAW . This column was represented as an OLE Container - which in 10g is obsolete - in a form (Forms 6i). Trying to compile this form to Forms10g , I receive an error FRM-30454.
Is it possible to retain the form as it is , by simply change a property , ....
Anyway , What are the possible solutions for this kind of problem?
Thanks , SimonNice subject title. It is as good as "Urgent. Please help". Why don't you go back and edit your message and change the subject to something like:
Long Raw / OLE: 6i to 10g -
My iSight is not working on my Macbook Pro. What are the possible problems and solutions?
Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M. -
What are the possible values for the JOB status?
What are the possible values for the JOB status in the table TBTCP and significance for each?
Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond -
The web developer toolbar wont load on my computer, what are the possible solutions?
when i click to download the toolbar now, firefox refreshes as it should be nothing happens.
maybe i dont see the toolbar? i cant find it.
what are the possible reasons its not downloading and what can i do?Hey lydiabat10,
Thanks for using Apple Support Communities.
Looks like the iPhone won't allow explicit content on it. One thing you may want to look at is the Restrictions.
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
Have a nice day,
Mario -
My Macbook Pro is getting hot pretty quickly. What are the possible causes? I have had the machine about 3 years.
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Install iStat Menus 4.05 to provide actual temperature readings and fan speeds. -
What are the possible errors that can happen in data loads(rsmo monitor)?
hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
poojaHi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK -
What are the possible reasons why this R3 info not getting to BW?
Hi,
I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
1. What are the possible ways to troubleshoot this?
2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
Please provide the necessary to tcode in all the discussions
Thanks1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
1. If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
2. If it is Part of Transactional Data, Check in your RSA3, PSA.
How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
Nagesh Ganisetti.
Assign points if it helps. -
What are the possible cost objects for raw material consumption postings
what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).
For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri -
HT3546 my airport will not power on, what are the possible causes?
My Airport just shut off and it will not power on. I unplug it from the wall and pulg it back into the power outlet but it still won't power on. What are the possible causes. Is this system just died out, I have it for about 3 years.
Causes....a failed electical power supply component or an internal connection that has come loose.
It's a real longshot, but if you are handy with small tools, carefully saw open the case of the Express along the center seam to open up the case and look for something obvious.
Your chances of success here are very very small, but if you have the time and inclination, it won't hurt to try. -
Orphan Essbase processes - What are the possible causes
We are running Essbase 11.1.1.1.00 on AIX and have encountered numerous orphaned processes. IE.
hypadm 753666 975046 0 Dec 16 - 487:34 /appl/hyp/hyperion/products/Essbase/EssbaseServer/bin/ESSSVR Periodic xxxxxx NOCREATE 10000 65535 "" 1 1 1927282691 NODEBUG 1 109 116 2 English_UnitedStates.Latin1@Binary
hypadm 975046 1 0 Dec 15 - 2:53 /appl/hyp/hyperion/products/Essbase/EssbaseServer/bin/ESSBASE ** -secure
We have to manually kill these processes or the cause problem with the logs and performance.
What are the possible causes? Has anyone else experiences similar issues?
ThanksWe had a similiar problem on UNIX. It was due to a process clean up script that was running as part of scheduled server maintenance. For some reason it would kill the Essbase server process and leave us with the orphaned child processes.
Once we figured that out the script was adjusted to ignore all Essbase processes.
Your example - I may be reading it wrong but it does not appear to be orphaned. -
What are the simple to use COM library in your java code
Hi,
what are the simple to use COM library in your java codePhHein wrote:
[javax/comm|http://java.sun.com/products/javacomm/reference/api/javax/comm/package-summary.html]
No, he wants to use Windows COM objects!
@OP
It's not easy. You can try j-integra or ezjcom, which I tried years ago and was not too happy, but maybe
they improved or they are just fine for your needs. $$$ involved!
If you want to do it by yourself, it won't be easy at all, I promise, but it can be done with JNI or JNA.
If your interactions are very few and simple, maybe some workarounds could be found.
Maybe you are looking for
-
Ipod Touch No longer working after Eleven days
I had been carefully checking blogs about which ipod touches had issues to make sure that mine was not part ok week 37. Nothing had gone wrong for the first week of use and i was pretty happy beyond a few small problems that i could live with. Like F
-
How to update Acrobat 9 to current version during CS4 install
HI All: I have a corporate wide deployment of Creative Suite 4 and Acrobat 9 Professional. Due to the security vulnerabilities of Acrobat Professional, we need to update Acrobat 9 to version 9.4 during the deployment. For Acrobat Pro 9 the procedur
-
Hi All, I have composite which needs to invoked from external world. But the invoker service which will be invoking the composite does not support WS-Security policies like username token etc. But the composite enforced the username token policy. How
-
when i click on a thumbnail of a pic from ebay or any webpage to get more info the page comes up blank
-
How can i update to x lion for free (i bought my iMac after 6/6)
Hey there.... I bought my new iMac after 6/6/2011 from isuare in Greece and apple sent me an e-mail to upgrade my software for free.... How can i do this...... Please help me.....