What are the possible errors that can happen in data loads(rsmo monitor)?

hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
pooja

Hi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK

Similar Messages

What r the diff. error that can be solved using RSRV tcode?

Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
[email protected]
Thanx in advance,
ravi.

Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik

What are the common errors that occur while extraction is carried out?

Hi all,
What are all the errors that occurs while extraction for fico, sd and mm?
Can anyone list me the errors along with the solution.
regds
hari

Hi hari shankar
It depends
Like the data level errors ,Short DUmps
USER EXIT ERRORS
some time source system code errors.
Hope itz clear a little atleast...!
Thanks & Regards
R M K
***Assigning pointz is the only way of saying thanx in SDN ***
**Winners dont do different things,they do things differently**
> Hi all,
>
> What are all the errors that occurs while extraction
> for fico, sd and mm?
>
> Can anyone list me the errors along with the
> solution.
>
> regds
> hari

My macbook is getting hot pretty quickly. What are the possible causes? How can I tell if it is mechanical vs. dust?

My Macbook Pro is getting hot pretty quickly. What are the possible causes? I have had the machine about 3 years.

Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Install iStat Menus 4.05 to provide actual temperature readings and fan speeds.

Is it possible to access my TimeCapsule from outside my local network via internet? If so what is the best app that can help me?

is it possible to access my TimeCapsule from outside my local network via internet? If so what is the best app that can help me?

iCloud can do it..
http://www.apple.com/au/support/icloud/back-to-my-mac/
You need Lion and latest firmware on the TC..
Were you hoping to use the ipad/iphone?? That maybe possible but I am not sure how.
You cannot use windows without opening SMB to some strange port and this is going to mess with security.. you also need a static ip address from your ISP.. most private net users do not have this.
You can do it via vpn.. you will need to buy a vpn router and bridge the TC to it.
Just google remote access time capsule.. there are a zillion posts about it.

This ios7 is the worst thing that can happen to apple phones . My phone is hanging all the time what should I do .

This ios7 is the worst thing that can happen to apple phones . My phone is hanging all the time what should I do .

Back up your iPhone and restore from backup. If that's does not help, restore your iPhone as new (not from backup).

What are the common errors we get in supporting project

can any body reply what are the common errors we get in supporting project
for abapers tickets will get or not.
what type of tickets generally get regarding reports.

SAP Tickets are nothing but problems or issues raised by the end
customer in a company where end users are running SAP project.
Once the SAP project is implemented, support phase begins. Support
team is responsible for solving the tickets/issues in day-to-day
business.
For any support project, customer will set up Help Desk. If any
problem occurs customer will call Help Desk and register the
issue/Ticket.
Different companies use different software products to manage SAP
Tickets. Remember this software is not provided by SAP. It is third
party software. There are many software products in the market like
Manage Now et c. You can call these software products as tools.
All tools will provide the common attributes which are listed below-
1) Every user will be provided with user name and password to enter
into the tool
2) We can see the tickets assigned for a particular user name.
3) You can list all open tickets by giving the Date Range
4) You can list all closed tickets by giving the Date Range
5) You can list out all the open tickets assigned for an User
6) You can list out all the closed tickets assigned for an User
7) You can see the description of the Ticket, by entering the Ticket
Number. You can see who had raised the Ticket, what is the problem.
What is the severity of the Ticket?
There are lot many other attributes like you can transfer the Ticket
to another user etc.
What is the severity of the problem Ticket?
When a Ticket is raised, it will be given severity. There are
following severities. It may vary from company to company.
Severity 1
Severity 2
Severity 3
Severity 4
The severity will be decided based on the business critical impacts.
If there is large impact on the business it
will be given 1 severity, if it is having least impact then it will be given 4.
Severity 1 problem tickets should be solved in 8 hours.
Severity 2 problem ticket should be solved in 16 hours.
Severity 3 problem ticket should be solved in 15 working days.
Severity 4 problem ticket should be solved in 30 working days.
Again the no of days may vary from one company to another.
All these things will be decided when giving the contract to the IT
company. The agreement is called as "SLA".
SLA stands for Service Level Agreement.
What happens if a particular ticket is not solved by the IT company
according to the SLA/Contract?
The Customer imposes fine on IT company as per the contract/SLA.
Errors in Extraction
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any
infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light
error message:
Master data/text of characteristic ZCUSTSAL already deleted
1)extraction job aborted in r3
2) request couldnt be activated because theres another request in the
psa with a smaller sid
3) repeat of last delta not possible
4) datasource not replicated
5) datasource/transfer structure not active
Issues faced during the implementation :
1. Slippage of milestones
2. Incorrect or wrong design
3. Reporting format problems
4. Data not matching or reconciling problems
5. Issues discovered during testing leading to redesign
6. Performance issues
7. Requirements misinterpretation
9)check the data same in source system and target system ( i mean
suppose u are extarcting from r/3 after loading check ur data r/3 and
bw same or not.
10)that is abap code, i didnt understand ur question properly.
11)
12) generic extarction, if ur businees contect satisfy ur requirement
u go for generic, suppose u need data from different tables go generic
with view with 1:1 relation 1:M relation for function module.
13)v3 update back groud job is in lo
14)its superior info object, u can find this in master data tab .
15)
16)tuning we will go for improve query performance (compression,
aggregates, partation, index, rollup, precalculated web tneplates.)
17) rsa7(check with some one)
18)bw statics for find data base time and olap time and frontend
time(based on u can improve query performance create like aggra comp ,
indices etc..)
19) direct chain only one chain , meta chain if u have more than one chains
load errors u can solve manually, other than load errors u can wait
right click and repeat.
20)
21) u cn cteate other cube and traansfer, but data space waste.(bec
structures will be deffi)
22) u mean data source enhancement.or not(let me know)
23)rsap0001( for customer exit variables) 001 for transaction data 001
attributes, 003 text 004 hierchies.
24)web application design , its like same bex, but report will execute
in browser.
25)
26) arrangement of process are called process type and we can use
varient and start process for back ground jobs.
Don't forget to asign points
regards
ravish

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

The charger port pin in an iphone 5 is broken. What are the possible solutions to this issue?

Read: http://support.apple.com/kb/TS4436
It is pretty short so here is the entire text:
Symptoms
A purplish or other colored flare, haze, or spot is imaged from out-of-scene bright light sources during still image or video capture.
Resolution
Most small cameras, including those in every generation of iPhone, may exhibit some form of flare at the edge of the frame when capturing an image with out-of-scene light sources. This can happen when a light source is positioned at an angle (usually just outside the field of view) so that it causes a reflection off the surfaces inside the camera module and onto the camera sensor. Moving the camera slightly to change the position at which the bright light is entering the lens, or shielding the lens with your hand, should minimize or eliminate the effect.
Which is exactly what eelw wrote.
No one on Apple Support Communities has authority to speak on behalf of Apple, unless their avatar is accompanied by this Apple image:
... identifying themselves as Apple employees.

What are the different messages that OCOD may return for a web service requ

Hi,
Please give me feedback on the questions below, concerning the limitations of web service, and messages which may return.
1) What are the different messages that OCOD may return for a web service request? I need all the messages of all the scenarios which OCOD can meet, for example:
- If the file is rejected (Error message)
- If the file is accepted (to clarify that the records have been created)
- if the application is unavailable (maintenance or web service is down)
2) How many request can we send simultaneously, and how many records we can make per second?
Best Regard,

Have a look here Jquery slideshow tutorial for beginners | WEBTUTS

The web developer toolbar wont load on my computer, what are the possible solutions?

when i click to download the toolbar now, firefox refreshes as it should be nothing happens.
maybe i dont see the toolbar? i cant find it.
what are the possible reasons its not downloading and what can i do?

Hey lydiabat10,
Thanks for using Apple Support Communities.
Looks like the iPhone won't allow explicit content on it. One thing you may want to look at is the Restrictions.
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
Have a nice day,
Mario

What are the general errors will come in data uploading

Hi Friends,
What are the general errors will come in data uploading
Thanks in Advance

Paul
It all depends on how we configure the system. Errors may be different for different scenerios like
User ALEROMOTE Loacked for master data's
Data Sourcs has to be replicated
Activation Failures
Error occures in data Selection Etc.
Do you have any specific error so that we can work on that.
Thanks
Sat

What are the possible reasons why this R3 info not getting to BW?

Hi,
I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
1. What are the possible ways to troubleshoot this?
2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
Please provide the necessary to tcode in all the discussions
Thanks

1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. Load New Sales Organization Texts.
1. If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
2. If it is Part of Transactional Data, Check in your RSA3, PSA.
How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
Nagesh Ganisetti.
Assign points if it helps.

What are the common errors we wil get in BDC?

what are the common errors we wil get in BDC?

hi sunil
BDC errors are similar to what you get in online transaction. Suppose you enter an invalid material number in online ME21N ( create Po ) system will throw an error and you have to correct it by chnaging a valid material number . Same error you can get in BDC as well. It is very difficult to generalize types of error as errors will depend on the transacation you are doing.
However some of the common BDC errors are ( Data for Screen Not Found, Field Not available in Screen ). These again are transaction specific and you have to analyze it by calling the transacion in display ALL mode.
The errors you get depends upon the transaction you are
running.
This is how you handle:
Let's consider you are recording for the transction CJ40
(Messages table declaration )
DATA :BEGIN of t_msg occurs 0.
include structure BDCMSGCOLL.
DATA END of t_msg.
Handling it :
CALL TRANSACTION 'CJ40' using T_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO t_msg.
commit work.
If you want to display the errors in the screen you can use a function module named 'RPY_MESSAGE_COMPOSE'
This gives you the corresponding message for the message number that you input.
Below is the sample code
Loop at t_msg. " Messages internal table
w_msgid = t_msg-msgid.
w_msgno = t_msg-msgnr.
w_msgv1 = t_msg-msgv1.
w_msgv2 = t_msg-msgv2.
w_msgv3 = t_msg-msgv3.
w_msgv4 = t_msg-msgv4.
CALL FUNCTION 'RPY_MESSAGE_COMPOSE'
EXPORTING
LANGUAGE = SY-LANGU
MESSAGE_ID = w_msgid
MESSAGE_NUMBER = w_msgno
MESSAGE_VAR1 = w_msgv1
MESSAGE_VAR2 = w_msgv2
MESSAGE_VAR3 = w_msgv3
MESSAGE_VAR4 = w_msgv4
IMPORTING
MESSAGE_TEXT = t_text-text.
TABLES
LONGTEXT =
EXCEPTIONS
MESSAGE_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MESSAGE_TEXT contains the message.
Please reward points if this explanation useful.
Regards,
navjot
reward points

What are the common error while EBS installation in Unix /windows

what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regards

Hi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios

What are the possible errors that can happen in data loads(rsmo monitor)?

Similar Messages

Maybe you are looking for