What are the possible Monitor Object status data members

I have problems connecting to the object over ethernet. I need to know what the status data member text info means.

Hi,
The status datamember of the Monitor object gives the state of the "connection" you're trying to monitor. For instance, when this datamember is displayed on a panel, it shows text like: "Good," "Disconnected," and so on.
Hope this helps,
Khalid

Similar Messages

  • What are the possible cost objects for raw material consumption postings

    what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).

    For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
    Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number.  If you are using movement type 201, then the system prompts you to enter the cost center and so on.
    Thanks,
    Madhav Nanduri

  • What are the possible errors that can happen in data loads(rsmo monitor)?

    hi all,
    what could be the error that could result in red color in the RSMO  monitor of data load transaction?
    1. request everything ok
    (what are the possible error type which make here red)
    2. extraction everything ok
    (what are the possible error type which make here red)
    3. transfer (idocs and trfc) error occured?
    (what are the possible error type which make here red)
    4. processing
        - data package
    5. process chain
    (what are the possible error type which make here red)
    6 other messages.
    (what are the possible error type which make here red)
    thanks
    pooja

    Hi,
    I can tell you the most common reasons of these failures.
    1. request everything ok
    Here it will be telling you if the request was properly send to source system and got triggered there.
    2. extraction everything ok
    In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
    3. transfer (idocs and trfc) error occured?
    When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
    4. processing
    Processing in BW fails for each data packet is displayed here.
    This can also happen when you have sysfail in source.
    5. process chain
    This can show the logs of the chain here and also status of subsequent process.
    6 other messages.
    Any other error message.
    Refer
    What is the information we can get the through details tab in RSMO
    working with RSMO errors
    http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
    Also
    Data Load Errors
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    Data Load issues
    Errors in loading
    data loading errors
    load Errors
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    process chain issues or errors
    Hope this helps.
    Thanks,
    JituK

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • My macbook is getting hot pretty quickly. What are the possible causes?  How can I tell if it is mechanical vs. dust?

    My Macbook Pro is getting hot pretty quickly. What are the possible causes?  I have had the machine about 3 years.

    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Install iStat Menus 4.05 to provide actual temperature readings and fan speeds.

  • What are the query types,Objects CRM provides for third party

    What are the query types,Objects provided by the CRM so that it can be called by third party for integartion pupose.

    First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
    You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
    Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
    can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
    Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
    DevBiker (aka J Sawyer)
    Microsoft MVP - Sql Server (StreamInsight)
    If I answered your question, please mark as answer.
    If my post was helpful, please mark as helpful.

  • What are the possible reasons why this R3 info not getting to BW?

    Hi,
    I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
    1. What are the possible ways to troubleshoot this?
    2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
    3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
    4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
    Please provide the necessary to tcode in all the discussions
    Thanks

    1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
    1.  If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
    2. If it is Part of Transactional Data, Check in your RSA3, PSA.
    How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
    Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
    If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
    case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
    case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
    Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
    Nagesh Ganisetti.
    Assign points if it helps.

  • My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

    Hello Douglas,
    Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro.  I recommend the following steps for this issue:
    Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
    Built-in iSight cameras
    These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
    See if the issue is application-specific.
    Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
    See if the issue is user-specific.
    Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
    Find out if the computer recognizes the iSight
    Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
    Reset SMC or PMU
    Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
    If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
    You can find the full article here:
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • What are the limitations in terms of data size  or performance while using csv or text file as datasource?

    <p>Also what are the limitations in terms of data size  or performance related issues while using csv or text file?</p><p>Is it the best practice to use csv , text file to use as a datasource to improve performance?</p><p>Please Advice.... </p><p>&#160;</p>

    <p>Hi,</p><p>Create Same Data Input for CSV and Text File ,Create 2 different reports one for CSV and One for Text ,run them one you have done that.</p><p>Go to Report Menu and Select Performance Information .Use the Data in that to check which one is good datasource to improve performance</p><p>Cheers</p><p>Rahul</p>

  • The web developer toolbar wont load on my computer, what are the possible solutions?

    when i click to download the toolbar now, firefox refreshes as it should be nothing happens.
    maybe i dont see the toolbar? i cant find it.
    what are the possible reasons its not downloading and what can i do?

    Hey lydiabat10,
    Thanks for using Apple Support Communities.
    Looks like the iPhone won't allow explicit content on it. One thing you may want to look at is the Restrictions.
    iOS: Understanding Restrictions (parental controls)
    http://support.apple.com/kb/HT4213
    Have a nice day,
    Mario

  • What are the different ways of retrieving data from Oracle8i

    What are the different ways of retrieving data from Oracle8i
    into my HTML page ?
    Is it JDBC and ODBC ?
    Is there any other way ?
    null

    Methods I tried,
    Applet using SQLJ/JDBC with JDBC drivers thin or Oci8,
    Oracle Web Publishing Assistant,
    HTP/HTF PL/SQL packages (if you have OAS 4.0)
    Webserver Generator of Designer 2000 (if you have OAS 4.0)
    Arun (guest) wrote:
    : What are the different ways of retrieving data from Oracle8i
    : into my HTML page ?
    : Is it JDBC and ODBC ?
    : Is there any other way ?
    null

  • What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

    What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

    If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
    Exactly what screen are you at on your iPhone?  It sounds like it is in Activation Lock.

  • HT3546 my airport will not power on, what are the possible causes?

    My Airport just shut off and it will not power on. I unplug it from the wall and pulg it back into the power outlet but it still won't power on. What are the possible causes. Is this system just died out, I have it for about 3 years.

    Causes....a failed electical power supply component or an internal connection that has come loose.
    It's a real longshot, but if you are handy with small tools, carefully saw open the case of the Express along the center seam to open up the case and look for something obvious.
    Your chances of success here are very very small, but if you have the time and inclination, it won't hurt to try.

  • What are the possible solutions..?

    I have a column in a database table of type LONG RAW . This column was represented as an OLE Container - which in 10g is obsolete - in a form (Forms 6i). Trying to compile this form to Forms10g , I receive an error FRM-30454.
    Is it possible to retain the form as it is , by simply change a property , ....
    Anyway , What are the possible solutions for this kind of problem?
    Thanks , Simon

    Nice subject title. It is as good as "Urgent. Please help". Why don't you go back and edit your message and change the subject to something like:
    Long Raw / OLE: 6i to 10g

Maybe you are looking for

  • Problems with safari screen grayed out unable to load pages from search

    Using IPAD last night and did a google search and google suggestions dialog box remains open along with keyboard, does not allow me to select any search results as the page is grayed out. When I try to select a new page, bookmarks of the back arrow I

  • PGI for STO movement type error Message no. L9005

    Hi Gurus, I have created an STO.Created delivery and confirmed TO. Now while doing PGI,single step only(647 movement type), system throws the following message, "" Error during search for WM movement type (641 1 L K  )    Message no. L9005 "". As per

  • Java Text Component

    hello everyone, i need help regarding java swing Text component. I want to create a photo album in java. i tried to use JTextPane to view picture and text, and it works fine, but when i tried to make the JTextPane uneditable, the JTextPane display on

  • Can LR 4 use Bridge CS5 Metadata Templates?

    I have generated approx 30 + Metadata Templates in Bridge CS5 and I want to see if I can speed up my work flow when working in Lightroom 4. So I suppose the question is ; is it possible to achieve the apparent impossible or is there a solution? Thank

  • No reqmts/caps exists or not relevant to finite scheduling

    Hello everyone, I had a question relevant to capacity planning. When i have created my process order and when i am running capacity availablity check the message "No reqmts/caps exists or not relevant to finite Scheduling" is displayed. I have checke