What are the possible reasons for adobe flash player crashing constantly?

I utilize mixcloud, soundcloud,and podomatic on a daily basis, and recently have been having problems getting these three to play. I'm not certain if there is a clash between the various plug-ins within my mozilla firefox browser. The error messages that I have been receiving sometimes acknowledge the problem as a adobe flash player error, a shockwave flash player error, and sometimes as a flash blocker being enable in my browser, which keeps me from receiving any audio playback and the music from downloading onto the page. I'm constantly being asked to reload the page, or request a crash report. Has anyone encounter this problem? Help!

Uninstall BOTH Flash Player and Shockwave using the Control panel.
Reinstall both using Flash Player Plug-in (All other browsers)
and http://get.adobe.com/shockwave/
Reboot
In Firefox, click Tools>Addons
Check to be sure BOTH plugins are enabled and the LATEST version

Similar Messages

What are the possible reasons for bill simulation fail on one day or

one period? Thanks.
ie:
Bill sim process flag is X in table ZET_SM_BIL_DAILY on a particular day or a particular short period.
Edited by: dan421 on Oct 24, 2011 11:23 PM

Hi,
There are many reason for faliur of bill simulation, can you please eloborate what error message you are getting.
Ritesh

What are the possible reasons for a procedure to go into uncompiled state?

hi,
we are working on a warehousing project where in we have a set of procedures that run every day to fetch the data from the source and populate it into the target. For the past few days some of these procedures are going into un-compiled state even though nobody has touched these procedures for a long time.
The behavior of these procedures is not consistent in the sence that when these procedures are run through the scheduler, these procedures are getting failed, where as when we run them manually they are working fine and subsequently when we try running them through the scheduler again they seem to be working.
following is the error message that is displayed when this procedures are failed:
ORA-04062: timestamp of package has been changed.
Kindly help me.
Thanks,
Raaji.

Thanks for the reply.
No, My procedure is not using any db links. And i have checked for remote_dependencies_mode, by using the below query and I got the VALUE as TIMESTAMP.
SELECT name, value
FROM gv$parameter
WHERE name = 'remote_dependencies_mode';
Do I need to change this value to SIGNATURE?
Thanks,
Raaji.

What are the possible reasons why I cannot reactivate using my AppleID, even though I already change its password with the help of Apple personel

What are the possible reasons why I cannot reactivate my Iphone5 using my AppleID, even though I already change its password with the help Apple personel

If the password for your Apple ID works at id.apple.com > Manage Apple ID, then it's likely that the Apple ID the device wants you use is not the same as the Apple ID you are using.
Exactly what screen are you at on your iPhone? It sounds like it is in Activation Lock.

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

What are the system requirements for Adobe Content viewer?

What are the system requirements for Adobe content viewer?

Hi j80r59m,
Please check the KB : http://helpx.adobe.com/digital-publishing-suite/help/create-custom-viewer-app-ipad.html

What is Apple's substtute for Adobe Flash Player on iPad?

What is Apple's substtute for Adobe Flash Player on iPad?

Until Adobe can develop a version of Flash that works for mobile devices that is stable and doesn't hog memory resources or ***** up battery life, there isn't much anyone can do about this!
Android devices claiming to run Flash are having these issues, too. Steve Jobs and Apple simply won't allow Adobe Flash to with their mobile hardware/software with the state of affairs with Flash, now. If Adobe has a breakthrough and can develop a version of Flash or some sort a content providing software that works and plays well with mobile devices and platforms, the situation may change. For the foreseeable future, Flash is going to be absent on current and future Apple mobile devices.
On another note, PPC Macs are obsolete technology that is, at least 6 years old. OS X 10.5 was the last Mac operating system to still support PPC Mac architecture. This OS is , at least, 3 years old. OS X 10.4 Tiger is, at least 5 years old.
You can't expect either Apple or Adobe,or any hardware/software manufacturer/developer, at this time, to keep supporting older technologies. Especially, anything 5 or 6 years old or more. It's just not cost effective or practical.
Technology marches on. There are many of us, probably, still using PPC Macs, including myself. We're all in the same boat.
At some point, we're going to have to play catch up to the latest and greatest to be able to stay current on the grid and to be current with new technologies, hardware, and software.
I do not think this is a rational reason to jump ship on a company who, arguably, makes the best technology hardware/software integrated devices and computers in the world.

What are the possible reasons why this R3 info not getting to BW?

Hi,
I have data coming into BW from R3 a datasource DataSorce1; When it gets to BW, SalesOrg numbers 22941 and 22942 comes to BW without problem but 22943 which is a new config. In the R3 master data does not get to BW.
1. What are the possible ways to troubleshoot this?
2. How can I confirm that the data shows in R3: i.e. showing my SalesOrg 22941 and 22942 in R3, and also confirm that 22943 truly exists in R3.
3. How do I confirm that 22943 did not get to BW (if it exists in R3)?
4. What if this is some custom program bringing 22941 and 222942 to BW? How do I see the program name and track down why the third one is not getting to BW?
Please provide the necessary to tcode in all the discussions
Thanks

1. 1st thing... If there is no Sales againest Sales Organization. you won't see in Cubes if it is part of Transactional Data. <u>Load New Sales Organization Texts</u>.
1. If it is new Sales Organization as Navigation Attribute only(Assume for Sales Order), try activate your master data for Sales Order. check in your Sales Organizatio IO Master Data and Sales Order Master Data
2. If it is Part of Transactional Data, Check in your RSA3, PSA.
How to check in RSA3?: If you are usng 2LIS_11_VAHDR. goto se16, provide VBAK table, press enter. in the Select for Sales Organization. Put 22943. Provide Order type Standard Order. and Execute. Take any Order Number from output list.
Goto RSA3, provide your choosen sales order in the RSA3 selection in Sales Order field Execute it.
If you are able to find this Sales Order in Both RSA3 and PSA. You are getting Data for 22943 Sales Organization.
case 1: If you are able to see Choosen Sales Order in RSA3, not in PSA. check User Exit Code.
case 2 : If you are able to see Choosen Sales in PSA and Not in Targets. check all transformation.
Are you working with Standard DS(2LIS_11_) or Custom Datasource(Z)?
Nagesh Ganisetti.
Assign points if it helps.

Adobe Flash player crashes constantly

Adobe Flash player crashes in all browsers. I have tried disabling hardware acceleration, expanding memory storage, downloading older versions etc, etc. I have tried IE10, Firefox 17, Chrome, Avant, and Safari, all with the same issues. I am running an I3 processor at 2.93ghz on an ASUS motherboard, 16gig of RAM, 2gig NVidia graphics card. Any ideas?
Sorry should add that I'm running Windows 8 Pro

Usually a complete fresh install resolves this.
Download the following files by right clicking and selecting "Save Link as"
Flash Player Uninstaller
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Save ALL files to your Downloads folder - DO NOT RUN anything yet.
Reboot your system.
BEFORE opening anything else, go to your Downloads folder and run the UNINSTALLER to remove all instances of Flash Player.
Next, run the ActiveX Installer.
Lastly, run the Installer for other browsers.
Once Flash Player is installed go to: http://www.adobe.com/shockwave/download/alternates/#sp
Download BOTH files, the one on the right FIRST by right clicking and selecting "Save target as"... the other by clicking and following the steps to dwonload the ActiveX installer.

What privacy settings are most people using for Adobe Flash Player and why?

Can anyone tell me what most people use for a privacy setting in Adobe Flash Player. I feel as though i want to use the "block all sites" option but i don't know if that is wise. Can anyone offer advice?
Thank you,
TomS

Can anyone tell me what most people use for a privacy setting in Adobe Flash Player. I feel as though i want to use the "block all sites" option but i don't know if that is wise. Can anyone offer advice?
Thank you,
TomS

What was the latest version of Adobe Flash Player for PowerPC. And where can I download it.

It`s all said in the headline. Hoping for an answer.
Thank You

You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

What are the possible approches for hosting a product(custom SP application) for multiple clients on a single SharePoint farm?

We have a product which is a custom application based on SharePoint Foundation 2010. Right now, for each of our client we create a dedicated server and host the application in the standalone deployment. Now, the requirement is to host multiple clients in a
farm deployment.
Challenges are: 1. The product has same name for the wsp that is deployed on different client servers as of now. How to distinguish for different clients on same farm
Currently the product specific css and jquery is in 14 hive. These files will be of difefrent versions for different client. How to segregate that?
How many web applications is recommend to be created in a single SPF 2010 farm? What are the challenges?
There are a couple of DBs created in SQL for the application. What is the best way to separate those for the client?
Essentially its the same product but with different versions for each client that we want to deploy in a single farm. What is the best practice to tackle this?

For the most part, these are not SharePoint questions per se, but product-specific questions you'd better ask the vendor about. To get in some more detail:
1. It totally depends on the scope of the solution. If its global, then you're out of luck and any changes you make affect all instances that use it. Better ask the vendor about it.
2. Not that many, let's say < 10, assuming you're web applications have separate application pools. Check out http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#WebApplication for
more info.
3. This is very application specific and really should be answered by the vendor. Not related to SharePoint at all.
4. Again, really depends on the product so better ask the vendor.
Good luck!
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

What are the system requirements for Adobe Creative Cloud?

I want to make sure my computer can handle the programs before I purchase it.

All listed here app-by-app
http://www.adobe.com/products/creativecloud/tech-specs.html#requirements
What are your system specs? Which operating system?
As a minimum, you'll need a 64 bit hardware and operating system to run apps such as Premiere Pro.

What are the main reasons for SAP-HR Implementation Failures?

Dear Consultants,
Can some one shed the light on the following items:
1. At least 3 main reasons for failure of SAP-HR Implementations?

Hi,
Check this link
http://searchsap.techtarget.com/news/article/0,289142,sid21_gci892265,00.html

What are the name servers for adobe business catalyst and how do I integrate muse with catalyst.

thank you, i have to post play auditions by tomorrow.
Dave

Check the KB for the name servers: http://helpx.adobe.com/business-catalyst/using/change-site-domain.html
For quick reference:
Redelegate domain to Business Catalyst DNS
To redelegate a domain, visit your registrar's website and log in to their control panel. After you log in to your registrar, go to the domain management section. Update DNS servers for your domain.
It's necessary to apply the following DNS server addresses:
ns1.worldsecuresystems.com (54.236.190.129)
ns2.worldsecuresystems.com (54.246.209.121)
ns3.worldsecuresystems.com (54.252.148.151)

What are the possible reasons for adobe flash player crashing constantly?

Similar Messages

Maybe you are looking for