What are the possible srcTrig and destTrig values for MapTrig2Trig?

I would like a general listing of the values for reference. As an example of something I might want to do, can I put the clock (CLK10) on the front panel TRIG OUT connectoe of my pc-870 controller by issuing the MapTrig2Trig with srcTrig=70 (CLK10) and destTrig=41 (TRIG OUT)?
jc
Mac 10.4
LV7.1
CLD

Hi jcrooke,
The values for this function can be found in the VXI API Reference help, which I have attached. Search for "maptrigtotrig" and the function help has a listing of the valid values. I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments
Attachments:
nivxiapi.zip ‏355 KB

Similar Messages

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are the delta mechanisms and tables used for Lo Extraction & COPA

Hi all
what are the delta mechanisms and tables used for Lo Extraction & COPA.
please explain clealry.
Thanks & Regards,
James

James,
Please go through Roberto's weblog :
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Anyways,
As you know LO cockpit consists of different modules(MM, PP, SD, etc)
They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
Assign points if helpful
Kalyan

What are the BEST Books and Best websites for java biginners?

Dear All,
What are the BEST Books and Best websites for java biginners-Especially for fast learning.
Thnaks
KMK

This is my standard reply:
[Sun's basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
[Sun's New To Java Center|http://java.sun.com/learning/new2java/index.html]
Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
jGuru
A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch
To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
[Yawmarks List|http://forums.devshed.com/java-help-9/resources-for-learning-java-249225.html]
[The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance]
[http://javaalmanac.com|http://javaalmanac.com]
Bruce Eckel's [Thinking in Java(Available online.)|http://mindview.net/Books/DownloadSites]
Joshua Bloch's [Effective Java|http://www.amazon.co.uk/exec/obidos/Author=Bloch,%20Josh]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance ]
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806]
Gosling is the creator of Java. It doesn't get much more authoritative than this.
Joshua Bloch and Neal Gafter [Java Puzzlers.|http://www.javapuzzlers.com/]

What are the supported Platforms and system requirements for JSE?

What are the supported Platforms and system requirements for JSE?

Hi There,
The following are the system requirements & the support platforms for JSE :-
* Solaris 9 and 8 Operating Systems (SPARC Platform Edition)
o UltraSPARC II 450-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: UltraSPARC III 750-MHz system with 1 GB of memory and 1 GB of disk space, or higher.
* Solaris 9 Operating System (x86 Platform Edition)
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher
* Windows 2000 and Windows XP
o Pentium III 500-MHz system with 512 MB of memory and 850 MB of disk space
o Recommended: Pentium III 1-GHz system with 1 GB of memory and 1 GB of disk space, or higher

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

What are the disc space and memory requirements for the apps?

What are the disc-space and memory requirements to run the apps

Hello John!
thank you for the info. However, as I have only 1Gb memory and a 32Gb
solid-state disc, I think that I will stay with Acrobate.com for a while
longer.
Regards
Brianb

HT5117 What are the new dpi and pixel rules for ibook cover art?

Plz tell me the new pixel and dpi requirements for ibooks. Thx

K T wrote:
Image dpi has a direct effect on image quality.
An image has no dpi, only pixels. What has dpi is the display that shows the image.
The pixel dimensions are an attribute of the image and determine how much information is in the image. The dpi is an attribute of the display and determines how many pixels are displayed in a given area.
The two values are independent and have nothing to do with each other.
If a program such as Photoshop or InDesign allows you to specify a dpi setting, it is so it can export an image with pixel dimensions that match the dpi of the target display, so the image appears at a pre-determined physical size. The programs also use the dpi setting so, when you ask to be shown the image at original size, the software can scale the image so it appears at that size even on a display whose dpi does not match the dpi of the target display.
When you upload a cover image, there is no dpi. There is one and only one thing: the pixel dimensions of the image.
Michi.

What are the minimum CPU and Memory requirements for R12 Vision instance?

We are in the process of trying to figure out what the minimum hardware requirements are for installing the R12 Vision instance. This Vision instance would only have 5 or less concurrent users. We may have to order a new server and we are wondering what the minimum CPU and memory would be? Oracle Support will not give us this information.
We aleady know how much disk space it will need.
Dan

Hi,
See these links.
A Primer on Hardware Sizing for Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2010/08/ebs_sizing_primer.html
What Are the Minimum Desktop Requirements for EBS?
http://blogs.oracle.com/stevenChan/2010/09/ebs_pc_clients.html
Also, please see old threads for similar discussion.
Hardware Requirements
http://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Benchmark
http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

What are the userid,password, and host name for oracle 9i?

HI Guys.
I am a research student at the University and the I recently downloaded Oracle 9i for my research. But the problems is also with seting it up. Please could you show me the userid, password, and host name for oracle 9i.
Thanks in advance for your cooperations.
Malinga R
[email protected]

I believe that starting with 9.2, you have to specify different passwords when you install (can't be the default).
Justin

Sy-msgno - What are the possible numbers and their meanings?

I am wondering what the possible numbers are for the field sy-msgno and their meanings. I am trying to determine what some code is doing but there isn't any documentation. The code is looking for, and setting, specific values in the field sy-msgno so knowing what these numbers mean will help me out.
Thanks,
Davis

It is the system provided Message Number.
Suppose you wants to display the error message provided by some SAP standard code (Ex: returned by functional module) then this is used along with sy-msgid to get the error message.
suppose i called a FM say 'OIB_QCI_READ_CONV_PARAMETERS'and it returned sy-subrc NE 0. now at that condition i want to display the system generated error message. Then i will use sy-msngo along with system id sy-msgid.
CALL FUNCTION 'OIB_QCI_READ_CONV_PARAMETERS'
              EXPORTING
                i_charg                  = lv_charg
                i_datum                  = lw_proxy_tab-zpicdate
                i_lgort                  = lv_lgort
                i_matnr                  = lw_proxy_tab-matnr
                i_werks                  = lw_proxy_tab-werks
                i_time                   = lw_proxy_tab-zpictime
              IMPORTING
                e_oib_a04                = lw_oib_a04_def
              EXCEPTIONS
                datum_not_passed         = 1
                matnr_not_passed         = 2
                not_found                = 3
                werks_not_passed         = 4
                conversion_error         = 5
                inconsistent_data        = 6
                calculation_failure      = 7
                inconsistent_customizing = 8
                OTHERS                   = 9.
            IF sy-subrc NE 0.
              lv_msg_id = sy-msgid.
              lv_msg_no = sy-msgno.
              CLEAR: lv_error_data.
              PERFORM fill_error_message TABLES pt_t_mailmsg
                                          USING lv_msg_no
                                                 lv_msg_id
                                                 lv_error_data.
              CLEAR: lv_msg_id, lv_msg_no, lv_error_data.
              lv_error = gc_x.
           ENDIF.
FORM fill_error_message TABLES pt_pt_t_mailmsg STRUCTURE solisti1
                        USING p_lv_msg_num TYPE char3
                              p_gc_mssg_class TYPE char8
                              p_lv_error_data TYPE char300.
DATA: lv_text(250),
        lw_msg LIKE LINE OF pt_pt_t_mailmsg,
        lv_error_data(18) TYPE c.
* Reading the error message from the message class
CALL FUNCTION 'MESSAGE_TEXT_BUILD'
    EXPORTING
      msgid               = p_gc_mssg_class
      msgnr               = p_lv_msg_num
      msgv1               = p_lv_error_data
      msgv2               = ' '
      msgv3               = ' '
      msgv4               = ' '
    IMPORTING
      message_text_output = lv_text.
* Append error message to error table
lw_msg = lv_text.
APPEND lw_msg TO pt_pt_t_mailmsg.
CLEAR: lw_msg, lv_text.
ENDFORM.                    "fill_error_message]

What are the username, password and connect string for Designer 6.1.1?

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
Oracle designer6.1.1
- Date/Time
- Browser + Version
IE 6.0
- O/S + Version
Win 98
- Error Msg
ORA-12154:TNS:could not resolve service name.
RME-00220:Fail to connect to repository
These error messages were shown after I entered system, manager and internal, respectively.

Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management

What are the username, password, and connect string for Designer6i R4.1.1

As the title, I tried system, manager and internal.
But it did not work out.
Thank you for your help.

Hi YungJen Chen,
There is no general username, password and connect string for
Designer 6i Release 4.1.1.
First, you install the client tools using the Installer. See also the
Designer Installation Guide, Chapter 1, 'Client Side installation'.
Second, you install the repository into an existing database, using
the Designer Installation Guide, Chapter 2, 'Server-side installation,
migration and upgrade'.
The Installation Guide provides step by step instructions on what
users you need to create for various purposes. Any database users
you may need to use such as System or Sys will use the password
given when you installed the database, or whatever passowrd you
changed it to since.
The Installation Guide is available as part of the download, or from
your Windows Start Menu once the Designer client tools are installed
or from the Designer Documentation page here on OTN.
Hope this helps. Regards,
Dominic Battiston
Designer/JDeveloper Product Management

What are the correct setup and system settings for importing HDV video from tape?

I keep trying different "easy setups" and system settings/preferences in order to import both the audio and video from HDV recordings on miniDV tape to no avail in either FCE4 or FCP5. I import via firewire from the camera. My computer "sees" the camera and controls playback (I can hear the audio) but no video displays for capture (just color bars).
My camera is a Canon Vixia HV40 and my computer is a MacBook Pro running Snow Leopard 10.6.8.
I've tried the HDV easy setup...no video...
I've tried HDV 1080i/60 as I saw recommended somewhere else...no video...
Captures standard video just fine but I'd like to try editing some higher def footage.
Any suggestions?
Many thanks.

The combination of all these helpful ideas solved the problem.
I set AV settings to HD and Apple Intermediate Codec HDV 1080i/60 AND set the cameras output to "locked" HDV. Funny, it had been on "A" (Auto) before and should have simply sensed the need for HD output. I then tried to capture using "A" again and this time it detected the difference between SD footage and HDV footage (I had clips of both kinds on the same tape).
I ran similar capture tests on FCP 5.1, FCE 4, and FCPX and all three programs captured HDV video and audio.
Thanks again everyone. Be sure the camera is set to output HDV or "A".

What are the possible values for the JOB status?

What are the possible values for the JOB status in the table TBTCP and significance for each?

Hi,
Have a look at include LBTCHDEF.
The standard include from SAP.
-> Definitions and Constants for Function group BTCH
Kind Regards
Raymond

What are the possible srcTrig and destTrig values for MapTrig2Trig?

Similar Messages

Maybe you are looking for