What are the possible values for a check box?

I'm trying to fill a pdf with a asp.net web form. I'm getting the text boxes filled ok, but I'm having trouble setting the check boxes. I am testing to see if a web form check box is checked. if it is, I tried to set the pdf checkbox value to "on". But this doesn't seem to be right.
My asp.net code is like:
If CheckBox1.Checked Then
         af.SetField("pdfbox1", "On")
End If
Any suggestions?
Thanks

The value is the value entered into the "Export Value" option when the form is created. You can use the Acrobat JavaScript "exportValues" property to get the array of values for the same named check boxes. And if you know the 'widget' of the check box, you can use 'isBoxChecked' method to check if a given 'widget' is checked. More information is contained in the Acrobat JavaScript doucmentation.

Similar Messages

  • What are the possible values for the JOB status?

    What are the possible values for the JOB status in the table TBTCP and significance for each?

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What are the default values for "default if unwired"?

    How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
    Is there a listing somewhere of what default values will be?
    Thank you,
    cayenne

    tst wrote:
    Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
    More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Outp​ut-tunnels-from-event-structure-should-default-to-​...
    VERY much agreed!  Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • What are the possible approches for hosting a product(custom SP application) for multiple clients on a single SharePoint farm?

    We have a product which is a custom application based on SharePoint Foundation 2010. Right now, for each of our client we create a dedicated server and host the application in the standalone deployment. Now, the requirement is to host multiple clients in a
    farm deployment.
    Challenges are: 1. The product has same name for the wsp that is deployed on different client servers as of now. How to distinguish for different clients on same farm
    Currently the product specific css and jquery is in 14 hive. These files will be of difefrent versions for different client. How to segregate that?
    How many web applications is recommend to be created in a single SPF 2010 farm? What are the challenges?
    There are a couple of DBs created in SQL for the application. What is the best way to separate those for the client?
    Essentially its the same product but with different versions for each client that we want to deploy in a single farm. What is the best practice to tackle this?

    For the most part, these are not SharePoint questions per se, but product-specific questions you'd better ask the vendor about. To get in some more detail:
    1. It totally depends on the scope of the solution. If its global, then you're out of luck and any changes you make affect all instances that use it. Better ask the vendor about it.
    2. Not that many, let's say < 10, assuming you're web applications have separate application pools. Check out  http://technet.microsoft.com/en-us/library/cc262787(v=office.14).aspx#WebApplication for
    more info.
    3. This is very application specific and really should be answered by the vendor. Not related to SharePoint at all.
    4. Again, really depends on the product so better ask the vendor.
    Good luck!
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • What are the APN values for Blackberry 9630 Tour?

    I have an application to communicate with my server, what are the values I need to set the APN Settings?

    Or if you're feeling creative, try THIS

  • What are the valid values for CPU in conditional disable structure config?

    After diggin' around for some time (but to no avail)...
    Does somebody know the valid values for the CPU (symbol) in the conditional disable structure configuration or where I can find this information?
    Best regards,
    Horst

    Not sure but you can try this:
    http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/app_apptarget_cpu/
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

  • What are the possible reasons for a procedure to go into uncompiled state?

    hi,
    we are working on a warehousing project where in we have a set of procedures that run every day to fetch the data from the source and populate it into the target. For the past few days some of these procedures are going into un-compiled state even though nobody has touched these procedures for a long time.
    The behavior of these procedures is not consistent in the sence that when these procedures are run through the scheduler, these procedures are getting failed, where as when we run them manually they are working fine and subsequently when we try running them through the scheduler again they seem to be working.
    following is the error message that is displayed when this procedures are failed:
    ORA-04062: timestamp of package has been changed.
    Kindly help me.
    Thanks,
    Raaji.

    Thanks for the reply.
    No, My procedure is not using any db links. And i have checked for remote_dependencies_mode, by using the below query and I got the VALUE as TIMESTAMP.
    SELECT name, value
    FROM gv$parameter
    WHERE name = 'remote_dependencies_mode';
    Do I need to change this value to SIGNATURE?
    Thanks,
    Raaji.

  • What are the allowed values for nsmerge?

     

    As requested, elaboration on the question. Is available in 4.11 & 5.0 via Console as follows:
    Directory Server.Directory tab.NetscapeRoot.<domainname>.Global Preferences.Common
    it appears as multi-valued attribute (nsmerge). Out of box is configured with {nsuniqueattribute}ADD_IF_EMPTY, {nsuseridformat]ADD_IF_EMPTY, {nsuserrdncomponent}ADD_IF_EMPTY & {nsgrouprdncomponent}ADD_IF_EMPTY.
    We have changed the naming attribute for a user entry to be cn. We use an external application to create the entries in the DIT (it does not add a userid); the entries are created. However, if you attempt to change an attribute in one of these user entries (via Console) & then save the change, an error is tossed saying data is missing (userid -> it is blank). We are trying to disable the mandatory userid. Any insight on how to achieve this objective would be most welcomed.

  • What are the default values for dom.max_chrome_script_run_time for FFVersions 25 through 30 ?

    I have run across issues that creep up. The timeout setting of
    dom.max_chrome_script_run_time
    seems to be 20 seconds in FF 25.0.1 and 10 seconds in FF 30
    I was wondering if you have release notes for all versions from
    [25, 30] so that I can know all of the different timeout values?
    Thanks,
    -Charlie

    Can you post a screenshot that shows a different default value of one of those prefs?
    Note that it is possible to modify the default value via a mozilla.cfg file in the Firefox program folder.
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

  • What are the accepted values for each Maps parameter in the Apple URL Scheme?

    I'm interested in a complete enumerated list of the acceptable VALUES (as in KEY=VALUE) for the URL Scheme defined https://developer.apple.com/library/ios/featuredarticles/iPhoneURLScheme_Referen ce/MapLinks/MapLinks.html
    Obviously some of those parameters have an enumerated list, some are freeform. I'm just interested in the enumerated ones.

    Hi,
    Have a look at include LBTCHDEF.
    The standard include from SAP.
    -> Definitions and Constants for Function group BTCH
    Kind Regards
    Raymond

  • What are the default values for the NetStream.multicast***** properties

    I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
    I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
    I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
    Sorry for my poor english, Thanks.

    the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream.  in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit.  setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher.  if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4).  this is for safety.  we recommend you always leave push enabled.
    each peer (including the publisher) can change the multicast stream parameters dynamically.  changes are local to that peer.
    for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called.  example:
       var ns:NetStream = new NetStream(netConnection, groupSpecification);
       ns.multicastWindowDuration = 10; // change default for everybody
       ns.publish("mystream");
       ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
    each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick.  overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received.

  • What are the color values for imessage and send buttons?

    I am trying to paint my room. Does anyone know the specific colors of the 'imessage bubble' or the 'send' button on the iPhone, iPad, iTouch. The RGB or Hexidecimal values would work. Thanks!

    Use the DigitalColor Meter app located in your utilities folder. This will allow you to hover over areas of your screen and it will display whatever type of values you want it to.
    Translating this into a paint chip number at the hardware store might be a bit of an issue though. There is no method (at least that I'm aware of) to translate computer color codes to paint swatches.

  • What are the possible reasons for adobe flash player crashing constantly?

    I utilize mixcloud, soundcloud,and podomatic on a daily basis, and recently have been having problems getting these three to play.  I'm not certain if there is a clash between the various plug-ins within my mozilla firefox browser.  The error messages that I have been receiving sometimes acknowledge the problem as a adobe flash player error, a shockwave flash player error, and sometimes as a flash blocker being enable in my browser, which keeps me from receiving any audio playback and the music from downloading onto the page. I'm constantly being asked to reload the page, or request a crash report. Has anyone encounter this problem?  Help!

    Uninstall BOTH Flash Player and Shockwave using the Control panel.
    Reinstall both using Flash Player Plug-in (All other browsers)
    and http://get.adobe.com/shockwave/
    Reboot
    In Firefox, click Tools>Addons
    Check to be sure BOTH plugins are enabled and the LATEST version

  • What are the possible reasons for bill simulation fail on one day or

    one period?  Thanks.
    ie:
    Bill sim process flag is X in table ZET_SM_BIL_DAILY on a particular day or a particular short period.
    Edited by: dan421 on Oct 24, 2011 11:23 PM

    Hi,
    There are many reason for faliur of bill simulation, can you please eloborate what error message you are getting.
    Ritesh

Maybe you are looking for