What are the pre requisites for Oracle B2B
Hi -
Could some one share me the sample tutorial for EDI transactions using B2B.
The documents and the threads which i checked does not have complete and basic knowledge for B2B developer.
My requirement is like ,i have an EDI transaction 214 ecs/flat file which needs to be converted to XML file through b2b and the corresponding artifacts can be used by SOA component(BPEL or mediator) to process the output xml further to complete the integration.
Kindly help me with .
Thanks in advance,
Rohini
Hello Peter,
When it comes to DB refresh you need to know what all the client dependent data which needs to be retained.
For example you need RFC connections, Variants, User master etc.
As a pre task of Database refresh you may need to export the tables which are related to this so that once the database is refreshed you need to import them.
Ensure the proper backup of production database is available. Also check all the STMS configurations which need to be retained again.
Make sure that you need to have enough disk space which can accommodate your production data in to the pre production system.
These are some of the general consideration one needs to have but again it depends on the environment on which one runs SAP systems.
Regards
Vivek
Similar Messages
-
What are the pre requisites for implementing ChaRM
Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
AnandThe listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM -
What are the pre requisites for SPLIT VALUATION OF A MATERIALS
Dear friends
What are the pre requisites for creating SPLIT VALUATION for A MATERIAL in particular Plant
regards
RadhaHi,
I am not sure what you mean exactly.
But you would need to have the valuation category and all of the valuation types created in config in advance.
Then you can allocate the appropriate valuation category to the material (accounting view) (as long as no stock or open POs etc. exist).
then you can create your additional accounting views (one for each valuation type that you want to use).
Steve B -
What are the pre-requisites for learning OA Framework?
Hi,
Im new to oaf,can any body help on this
What are the pre-requisites for learning OA Framework?
KarthikIn order to develop any OAF Application you need to know few concepts before doing any kind of development. The concepts are basically the Business Components for Java(BC4J) components.
They are:
Application Module(AM)
Entity Object(EO)
View Object(VO)
Association Object(AO)
View Link(VL)
Now let us see the description of each component.
Application Module:
Application Modules serve as a containers for related BC4J components. The pages are related by participating in the same task. It also defines the logical data model and business methods needed.They provide the transaction context and also used for establishing database connection. AM’s can be nested to provide more complex AM’s.
Entity Object:
EO encapsulates the business logic and rules.EO’s are used for Inserting,Updating and Deleting data. This is used for validating across the applications. We can also link to other EO’s and create a Association object.
View Object:
View object encapsulates the database query. It is used for selecting data. It provides iteration over a query result set.VO’s are primarily based on Eo’s. It can be used on multiple EO’s if the UI is for update. It provides a single point of contact for getting and setting entity object values. It can be linked together to form View Links.
Association Object:
An association object is created where we link EO’s. For example take the search page where we link the same EO to form a association between the manager and employee. Every employee should have a manager associated. But if it President then no there is no manager associated. This is a perfect example to understand the AO.
View Link:
A view link is an active link between view links. A view link can be created by providing the source and destination views and source and destination attributes. There are two modes of View link operation that can be performed. A document and Master/Detail operation.
-----Let me know if you need more information
Regards
Meher Irk
Edited by: Meher Irk on Oct 23, 2010 10:45 AM -
What are the pre requisites for E-Recruitment module?
Hi all,
What are the pre requisites for implementing E-Recruitment module ?
Does it require Hr module or as stand alone it can work?
Regards.
RajendraThanks Aniket
Will the following configuration work as e-recruitment stand alone mode.
WAS with ABAP stack + E-Recruting 6.0 sp + Java stack + Portal + ESS MSS Business package ( for e recruiting).
Regards
Rajendra -
What are the pre requisites for SAP SRM7.0 DB Rrefresh?
Hi,
What are the pre requisites for SRM DB Rrefresh?
ThanksHello Peter,
When it comes to DB refresh you need to know what all the client dependent data which needs to be retained.
For example you need RFC connections, Variants, User master etc.
As a pre task of Database refresh you may need to export the tables which are related to this so that once the database is refreshed you need to import them.
Ensure the proper backup of production database is available. Also check all the STMS configurations which need to be retained again.
Make sure that you need to have enough disk space which can accommodate your production data in to the pre production system.
These are some of the general consideration one needs to have but again it depends on the environment on which one runs SAP systems.
Regards
Vivek -
What are the pre-requisite for JAVA Proxy communication?
What are the pre-requisite for JAVA Proxy communication?
Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d -
What are the pre-requisite for ABAP Proxy communication?
What are the pre-requisite for ABAP Proxy communication?
hi,
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
ABAP Server Proxies (Inbound Proxy)
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
OutBound Proxy (Client Proxy)
/people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
File to R/3 via ABAP Proxy with good example
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
Debug your inbound ABAP Proxy implementation
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
regards
srinivasreddy -
What are the Pre-requisite to set Deletion Flag for Maintenance Order ?
Hi Gurus,
Pls give me what are the pre- requisite to set the deletion flag.
I want to set deletion flag to some Maintenance Orders which are with notification, but deletion flag - SET,RESET Indiacaors are inactive.
Following are my observations-
1) Order is not yet released.
2) No actual Cost is with the order.
3) No PR and POs are with the Order.
Pls guide me.
With best regards,
narendrahi
you can put the deletion flag only when the order has the status CLSD or the balance of the order must be Zero
you can refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e65a0462a11d189000000e8323d3a/content.htm
regards
thyagarajan -
What are the installation steps for Oracle Fusion HCM
Hi all
I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
ThanksIf you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
Atul has also posted some good stuff on installing:
http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/ -
What are the BEST books for Oracle database architect/designer?
What concrete books would you recommend for OLTP database developer (to start from the scratch, starting from data sources analysis, logical and physical data modeling, indexes, tuning, maintaining). It doesn't have to be a book particulary for Oracle but suitable for it..
I don't mean books DBA's or overall Oracle handbooks, also not for OLAP.
Thanks!For learning how to use Oracle database effectively, i would say
Tom Kyte's both books:
Effective Oracle by design
& Expert Oracle Database Architecture
Jonathan Lewis's
Practical Oracle 8i
They tell you all the stuff: what/how to do something? and most importantly what/how not to do ?
And their writing style is just awesome :)
Amardeep Sidhu -
What are the Pre-requisites in installing NWDI
Hi Experts,
I would like to ask if you have a list of all requirements when installing NWDI.
Thanks,
EdyHi,
no need to do anything with NWDI if you have already one. Or if you are about to install a new one, it can be any version (general recommendation, the higher the better, but if it is say 730 for instance, it'll be able to serve any developments, let it be 700, 710 ... 740, etc. If it is 700 higher than SP13 then again, you'll be able to develop/deploy for any releases. Just make sure it is not lower than SP13 if you intend to use 700 NWDI. If you use higher release than 700 then it does not matter).
I am sure you'll love this blog:
NWDI vs. NWDI content
Cheers,
Ervin -
Entry level pre requisites for oracle functional consultant
Hi
I have done by B.E(Computer Science ) with M.B.A
(marketing&systems).
Currently I am working for a distribution division that deals with
HP PRODUCTS in a leading IT firm in DUBAI as a marketing executive
I would like to climb up the corporate ladder into segments like
business intelligence, Management information systems or designing a
business structure etc that require expertise in terms of both technical and management like that of a functional consultant
what are the pre requisites or certifications that should be taken
to direct my career towards these fields .
Kindly advise since I would like to direct my career in the right field
thanksHi, I need to choose a product to monitor server accesses and also database accesses, but to monitor our databases I should start audit on them (so I need to stop and start our database) and collect many transactions just to let that tool to read the DBA_AUDIT_TRAIL table, get those informations over the net, insert them into the tool's database (another Oracle database) and then delete them from our databases... !!!
I've read this thread and also this one ( Oracle Audit Vault vs Third Party Tools )
It seems that with Audit Vault I need to enable audit on all our databases and then it will collect audit informations from a central machine, is it right ? Is there no way to collect those informations, reading them from archivelog or in another way ? How much does audit impact over performances on a OLTP database ?
Instead Database Vault seems to provide ONLY :) strong access control, but it seems it doesn't use AUDIT table... is this right ?
What are pros and cons comparing these products ? -
What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.
Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0) -
What are the solutions offered by Oracle to handle length based products
We are on 11.5.10. Current version treats beams as each, we have 30 feet beams, 20 feet beams etc.
We do not want to set-up different items for each length of beam.
We need ability to tell we have 10 pieces of 26 feet beams in inventory.
Currently we can only tell we have 260 feet of beams.
Current solution treats it discretley. We need ability to sell length based items, receive length based items, do inventory management based on length based items.
a) What are the solutions offered by Oracle in latest releases for Length based products or for Mill products.
b) If there are any solutions offered by Oracle to handle length based or mill products, can these be back ported to Oracle 11.5.10?Please do not create duplicate posts across the forums -- What are the solutions offered to handle length based or mill products?
Maybe you are looking for
-
Im trying to update my apps from the ipad in the app store section and when i press update the ipad tells me that im not connected to the itunes store??
-
Why do I keep getting error 150210 when I attempt to download Adobe Reader XI
Why do I keep getting error 150210 when I attempt to download Adobe Reader XI?
-
SRM - SUS, EBP,CCM,2007 Delta
Hi Gururs, Could you please let me know what is meant by SUS, EBP, CCM and 2007 Delta - all these are related to SRM As i'm new and learning SRM i'd like to know the basic idea of the above Regards Bala +91 98861 23202
-
The Left side of my browser screen has a seperate screen with it's own scroll bar. I can use the curser to pull this screen half way to the right. it has a seperate web page than the main window. I can't find a command to remove it. I did have a yaho
-
Problems with IE and dreamweaver
Hi - I've used dreamweaver for years now on and off, but IE has just started behaving really anoyingly (even more so than before) I've just done a simple navigation button, with an over image switch, but whenever I preview it in IE there a big securi