What are the prerequisite for getting MTTR / MTBR data.

Dear SAP Experts,
I want to know what are the prerequisite for getting MTTR / MTBR data.
Regards
ERP Tech

Pre-requisites are:
Maintain Start date in Equipment / Functional location master
Maintain the Malfunction Start date & time, Malfunction End Date & time in Notification
Maintain the Breakdown tick mark in notification
Maintain update group (stats) in Notification type configuration (IMG - Plant Maintenance & Customer Service - Maintenance & Service Processing - Maintenance & Service Notifications - Notification types - Define Notification types)

Similar Messages

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What are the procedures for getting Apple to remotely wipe all my data off my ipad that was stolen? I have no hope of recovering it. Please advise asap...thanks!

What are the procedures for getting Apple to wipe the data off my original ipad I bought two years ago. I had it stolen from a hotel room over the weekend and it is not password protected and no I did not download app to find it.
Any hwlp would be greting appreciated!

Apple can't do it, only you could potentially do it if you had enabled Find My iPad on it before it was stolen.
If it was stolen then you should report it to the police. As a safety precaution you should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

What are the Prerequisites for MDM

HI,
I would like to know what are the prerequisites for SAP MDM

Hi,
for MDM 5.5 installation, requirements are:
MDM 5.5 Server:
--> Microsoft windows 2000/ 2003/xp
--> Linux -- kernel version 2.4 or higher with the following
libstdc ++.so.5 or higher
glibc 2.2 or higher
 sun Solaris - 8 - sunos 5.8 rev .02/02 or later
DBMS:
--> Microsoft SQL server 2000 ( version 8.0 sp3)
--> Oracle 9.2
--> IBM DB2 8.1 version
MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
MDM 5.5 API's:
--> COM
--> JAVA
Desktop Publishing:
--> Quark Express (windows and Macintosh)
--> Adobe In Design (windows and Macintosh)
Installation: MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
1.First we have to maintain Database server.(Sql 2000, Oracle 9i)
2. We have to install MDM Server.
3. After that install GUI clients.
3.1. Console
3.2.Importmanager
3.3.Datamanger
3.4.Syndicator
4. Import manager Batch server, Syndication Batch server.
5. Next coming to repositories go to Business content folder And select repositories .
6.Program files --> sap MDM 5.5 --> Server > Archives> Put the repositories.
7. In Console Mount the MDM server.
8. Unachieve the repositories based upon Requirement
Regarding this Any issues please let me know.I will clarify ur doubts.
For MDM Learning
https://www.sdn.sap.com/irj/sdn/mdm-elearning
Please go through this link
Regards
Hari

What are the prerequisites for GATP and how to check SO in APO

Hi
I've created a Sales order in R/3. for this the availability check is being done in APO(SCM). when I press enter it is going to APO(SCM).
now i want to see this Sales order in APO(SCM), what is transaction for this? and do i need to maintain any CIF model to see the Sales order in APO.
pls give me some note on this.
thanx in advance
Satya
Edited by: Wilian Segatto on Jan 25, 2010 4:40 PM

Hello,
Please refer Building block of GATP, you will able to get systimatic way how to use GATP functionality in R/3 and APO as well as what are the settings require for it.
http://help.sap.com/bp_scmv150/BBLibrary/documentation/ATP_BB_ConfigGuide_EN_DE.doc

What are the prerequisites for upgrading to CU7

I've been trying to get a definitive list of prerequisites for the upgrade to Exchange 2013 CU7, but every time I find another site with info it says something different.
I know I need to have Domain functional level at 2008 SP1 to run the Schema extension, no problem there. However, I found something that tells me I need to have the Exchange servers running .NET Framework 4.5.2 and Windows Management Framework 4.0, but the
same site then says this is actually needed on the machine used to prepare AD. that means it needs to be one of the domain controllers running these.
Other sites say these need to be installed but do not say which server(s) need them.
Can anyone give me the list of prerequisites? The information I managed to find on the Microsoft site mentioned nothing about the domain functional level, I only found this requirement after trying to run the schema extension and getting a report the DFL
needs to be 2003 native mode or above, I ran a targeted search for DFL requirements and found a table listing this for different versions of Exchange.
This is frustrating to say the least, makes carrier pigeons seem a viable alternative right now!

Thanks to everyone who has replied, but the fact 3 different people have replied and given varying replies is what I was talking about.
Microsoft, in the prerequisites information found at
https://technet.microsoft.com/library/bb691354(v=exchg.150).aspx say this
Active Directory preparation
The computer you want to use to prepare Active Directory for Exchange 2013 has specific prerequisites that must be met.
Install the following software, in the order shown, on the computer that will be used to prepare Active Directory:
The version of Microsoft .NET Framework that corresponds to the version of Exchange 2013 you're installing.
Exchange CU7 and later   .NET Framework 4.5.2
Exchange CU6 and earlier   .NET Framework 4.5.1
The version of Windows Management Framework that corresponds to the version of Exchange 2013 you're installing.
Exchange 2013 SP1 or later   Windows Management Framework 4.0
Exchange 2013 CU3   Windows Management Framework 3.0
but from what others say, installing .NET 4.5.2 before installing CU7 will break Exchange services.
I think I'm just going to try the schema extension without installing anything and see what happens, if I still have my job after this I will let you know

What are the prerequisites for auto-merge dimension to work in Webi

Hello,
We're working with Webi rich client (WRC) r3.1 SP4 FP4.1, and we noticed some strange behaviour.
We have a report with 2 dataproviders based on the same universe, which have a year dimension in common (exact same name, same datatype). It is not the same year-object.
We expected that WRC would auto-merge those 2 year objects, but it doesn't and we're wondering what might be the cause.
Thanks for your help
Guy

Hello Henry,
As mentioned in my initial post, we're on BOXI 3.1 SP4 FP4.1.
What you are describing is the principal of "manual" merging, my question is related to the automatic merging.
I would like to know this, because we're having problems working out a working example for drilling in Webi using query drill with multiple dataproviders and merged dimensions. And we're assuming that the drilling accross the multiple dataproviders is only possible when automerge is active. Because all dataproviders need changes is the where clause of the queries to limit the scope of analysis during the drilling.
Kind regars
Guy

What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What are the prerequisites to install and configure Oracle Coherence 3.4

What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
What kind of network configuration is OK?
What software should be installed in advance？
Thank you

Hi,
I would read through the Testing and Tuning section of the following page.
http://coherence.oracle.com/display/COH34UG/Usage+(Full)
Even though you are not about to go into production I think the Production Checklist has some very useful information.
http://coherence.oracle.com/display/COH34UG/Production+Checklist
-Dave

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
Appe does not ship outside of the countries where it sells the phones.

What are the wildcards for FILE_MASK in FM EPS_GET_DIRECTORY_LISTING

The wildcard for exactly 1 character is '?'.
example: with mask ????????.STA     , I get the following files:
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
(all files ending with .STA, with 8 characters before .STA)
But what is the wildcard for 'any character' ?
I tried with *.STA     , but the result is
test1
test2
test3
test4
y5c01
(all the filenames with exactly 5 characters)
with *STA, the result is
IBAN
PBCL
rfbi
stxh
stxl
(all the filenames with exactly 4 characters)
(the result is the same with *123 or *XYZ !!!)
with BW*, the result is
BWMDAACW.STA
BWMDAADW.STA
BWMDAAEW.STA
BWMDAAFW.STA
BWMDAAGW.STA
as expected, but * seems the right wild character for 'any character' only at the end of the mask; it seems not work as expected when it is not the last character of the mask.
It seems very strange! What are the rules for wildcards ? (I'm in 4.7)
thanks in advance

CONSTANTS DAYS1980     TYPE I VALUE 3652.
DATA: linelength TYPE i VALUE 0.
DATA: linelength1 TYPE i VALUE 0.
DATA: text TYPE string.
DATA: DLIST    LIKE EPSFILI OCCURS 0 WITH HEADER LINE,
      DPATH    LIKE EPSF-EPSDIRNAM,
      PFILE    LIKE EPSF-EPSFILNAM,
      MDATE    LIKE SY-DATUM,
      MTIME    LIKE SY-UZEIT,
      POINT_IN_TIME TYPE I.
DATA: BEGIN OF FATTR OCCURS 0,
          FILE_NAME LIKE EPSF-EPSFILNAM,
          FILE_SIZE LIKE EPSF-EPSFILSIZ,
          FILE_OWNER LIKE EPSF-EPSFILOWN,
          FILE_MODE LIKE EPSF-EPSFILMOD,
          FILE_TYPE LIKE EPSF-EPSFILTYP,
          FILE_MTIME(12),
      END OF FATTR.
PARAMETER P_PATH(50) TYPE C DEFAULT '/TMP' LOWER CASE.
PARAMETER P_FILE(50) TYPE C DEFAULT ' ' LOWER CASE.
DPATH = P_PATH.
PFILE = P_FILE.
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
     EXPORTING
          DIR_NAME               = DPATH
*          FILE_MASK              = PFILE
     TABLES
          DIR_LIST               = DLIST
     EXCEPTIONS
          INVALID_EPS_SUBDIR     = 1
          SAPGPARAM_FAILED       = 2
          BUILD_DIRECTORY_FAILED = 3
          NO_AUTHORIZATION       = 4
          READ_DIRECTORY_FAILED = 5
          TOO_MANY_READ_ERRORS   = 6
          EMPTY_DIRECTORY_LIST   = 7
          OTHERS                 = 8.
break developer.
IF SY-SUBRC EQ 0.
LOOP AT DLIST.
linelength = STRLEN( DLIST-NAME ).
    linelength = linelength - 3.
linelength1 = STRLEN( P_FILE ).
    linelength1 = linelength1 - 3.
if DLIST-NAME+linelength(3) = P_FILE+linelength1(3).
    CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
         EXPORTING
              FILE_NAME              = DLIST-NAME
              DIR_NAME               = DPATH
         IMPORTING
              FILE_SIZE              = FATTR-FILE_SIZE
              FILE_OWNER             = FATTR-FILE_OWNER
              FILE_MODE              = FATTR-FILE_MODE
              FILE_TYPE              = FATTR-FILE_TYPE
              FILE_MTIME             = FATTR-FILE_MTIME
         EXCEPTIONS
              READ_DIRECTORY_FAILED = 1
              READ_ATTRIBUTES_FAILED = 2
              OTHERS                 = 3.
    IF SY-SUBRC EQ 0.
      FATTR-FILE_NAME = DLIST-NAME.
      APPEND FATTR.
    ENDIF.
    endif.
ENDLOOP.
SORT FATTR BY FILE_NAME.
LOOP AT FATTR.
    POINT_IN_TIME = FATTR-FILE_MTIME.
    CALL FUNCTION 'POINT_IN_TIME_CONVERT'
         EXPORTING
              POINT_IN_TIME = POINT_IN_TIME
         IMPORTING
              DATE          = MDATE
              TIME          = MTIME
         EXCEPTIONS
              OTHERS        = 1.
    SUBTRACT DAYS1980 FROM MDATE.
    WRITE: / FATTR-FILE_NAME,
             FATTR-FILE_SIZE,
             MDATE,
             MTIME.
ENDLOOP.
ENDIF.
Edited by: kk.adhvaryu on Sep 25, 2010 12:08 PM

What are the ranges for correct skin tones using RGB%?

What are the ranges for correct skin tones using RGB%? Used to using a scale from 0 to 255. But with LR it's RGB , I know 100% RGB is white. What do you use for %?

While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
R: highest %
G: middle %
B: lowest %
To get a little more specific. In general,
R: Y + (15-20)
G: average of R and B
B: R – (15-20)
For example, the following values represent common Caucasian skin tones using the rules above:
* R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
* R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone. Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors.

What are the prerequisite for getting MTTR / MTBR data.

Similar Messages

Maybe you are looking for