What are the pro's and con's of the 4s?

I am not yet an owner of the 4s iphone. So what are the pro's and con's of owning the white 32gb iphone 4s? I have had the white 32 gb iphone 3gs for two years and until I get a job I will not be buying the 4s I so need.

Samplers do alot of things, what do you need a sampler for?
Korgs remind me of alot of presets and alot of verb and chorus. I guess if you're posting here you already have EXS and want more sounds or more functionality and if the korg thing is true you lean more to sampling/synthesis than instrument recreation (as in you probably aren't going for VSL if the korg caught your ear). Independence looks really cool, it's quite new. Kontakt is demanding and very flexible, both include huge libraries and I know kontakt has tons of great filters, FX, modulation. It also needs a pretty strong update-which is being dealt with after a year or so.

Similar Messages

HT2240 I bought the Pro upgrade and quicktime wont accept the code

I paid for the Pro upgrade and Quicktime wont accept the code

I have the same problem, and I copied exxactly the info from the apple e-mail, and it still does not work, any links to the customer support??

Has anyone developed a site for podcast in Muse? If so what are the pro's and con's vs. using Wordpress?

have built a few sites in Muse and hope to host my podcast on a dedicated Muse created site. I use BC for my sites. Has anyone designed a podcast site in Muse and if so, what are the por's and con's opposed to just doing this with Wordpress and power press plugins?

one-armed is the easiest to install - less disruptive as you can keep your current network unchanged.
However, it requires special configuration to guarantee that the return traffic from the server goes back to the CSM.
This is done by doing client nat which will prevent the servers to see the client ip address and therefore to create statistic based on client ip.
There is a way to inser the client ip in the HTTP header, but it only works for HTTP.
Router-mode is easier to understand and troubleshoot.
The CSM is just like a router with vlans and routing between each of these.
It requires a minimum of configuration.
However, it is important to design correctly.
For example I would recommend not to have client accessing the CSM directly.
They should go through the MSFC first.
Then I would recommend to have only 1 vlan between CSM and MSFC- this is because the CSM only uses 1 default gateway even if you can configure many.
You never know which is active.
The CSM also expect the traffic to come back on the vlan it went out. If you have multiple vlan it is difficult to control on which vlan the response will come back.
Finally 'bridge mode' is good if you want to insert the CSM between the servers and their current default gateway without having to reconfigure the servers.
This is a good solution.
Disadvantage is that all traffic from servers will go through the CSM and it is more difficult to avoid in case you really need it.
A little more complex to troubleshoot as well.
Conclusion: bridge or routing mode is ok - avoid at all cost one-armed.
Regards,
Gilles

What are the pro's and con's (samplers)

-I hate to beat and dead horse, but Im about to buy some new software, and I trying to make the best choice--
What are the pro and cons of the major samplers (Im looking for a more radio-ish sound, motif/triton/phantom).
i.e:mach five, sampletank 2l, exs, and kontact
(a poster here said Colossus, ive need heard of it are used it--or HALion(is this only for pc's)--gigastudio(same questions as halion).

Samplers do alot of things, what do you need a sampler for?
Korgs remind me of alot of presets and alot of verb and chorus. I guess if you're posting here you already have EXS and want more sounds or more functionality and if the korg thing is true you lean more to sampling/synthesis than instrument recreation (as in you probably aren't going for VSL if the korg caught your ear). Independence looks really cool, it's quite new. Kontakt is demanding and very flexible, both include huge libraries and I know kontakt has tons of great filters, FX, modulation. It also needs a pretty strong update-which is being dealt with after a year or so.

Did anyone analyze the Pro's and Con's between BPM Suite & ORACLE BPA+SOA?

Hi,
Did anyone work on the comparison between Oracle BPM Suite which is enhanced version of AquaLogic BPM, and the Oracle BPA Suite+ SOA Suite?
regards,

Create a new user oracle and proceed with the installation
--> useradd -g oinstall oracle
If your are forwarding your GUI using xming or vnc you would need to copy the xauth of root user and set it to oracle
[server1:root] xauth list
bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e
[server1:root] sudo su - oracle
[server1:oracle] export DISPLAY=localhost:10.0
[server1:oracle] xauth add bangvmpllE.com/unix:11 MIT-MAGIC-COOKIE-1 b23d63374fe25a3577751b6b95b2210e

Asynchronous Processing of Workflow in Final Step Pro's and Cons?

Hi,
I was wondering if anybody has experience with "Asynchronous Processing of Workflow in Final Step".
in our workflow process we have decided to use Decision type 4: item based desicion for partial document.
currently we are working on SRM Server 731 and I cannot find this in customization. I suspect I need to enable business function : SRM_APF_IMPR_1.
can any body confirm this?
But does anybody have some experience using this functionality, and provide some experience in the Pro's and Con's.
on the link i found on SAP website limited information is available: :
http://help.sap.com/saphelp_srm701/helpdata/en/c9/e6c2d976564cfe83ba850890d6f946/frameset.htm
Hope anybody can provide some insight.
thanks Sing

Hi Sing,
SAP says, that asynchronous processing should be faster for the large shopping carts (Last approver should not wait to long). But actually I have not determined big difference.
If you activate this switch - do not fordet to activate following entry in SWE2.
Regards
Konstantin

Fabricpath or OTV in DCI (Pro's and Con's)

Hi to All,
We are in the process of migrating our current DC and DR from 6500 Series and FWSM to N7K, 5K and 2K with ASA 5585 also. We have two existing data center connecting via redundant dark fiber. In our new design with Nexus 7K, 5K and 2K with ASA 5585 there are two N7K in Main DC with two VDC's one for the Access on the user side and one for the Server side an aggregation switch will be use (5K) and extender (2K) for the server side. The two Data Center are both identical. Currently we are deciding which technology we will use inside the two DC and the DCI as well. If you can provide me the pro's and con is using the following technology below I would really appreciate;
1. VPC in both DC and DR while the DCI will be (OTV).
2. VPC+ in both DC and DR while the DCI will be (OTV).
3. VPC in both DC and DR while the DCI will be (Fabricpath)
4. VPC+ in both DC and DR while the DCI will be (Fabricpath)
Also if you can enlighten me about the FHRP caveats with all these technologies. Thank you in advance...
Note: Please see the drawing for your reference also...

Leeroi,
Hopefully this does not violate terms of service.
check out bug CSCtg90112
And here is some reading on your questions
https://supportforums.cisco.com/discussion/12391121/fabricpath-or-otv-between-two-datacenter-using-direct-fiber-cable

Pro's and Con's to using Copies of Standard Material Types

Hi
We are looking for the pro's and con's of using copies of standard SAP material types for my company. We are a consumer goods company and looking to see if there are drawbacks and benefits when it comes time to upgrade SAP. Also what industry standards are out there for when we change / add views to standard SAP material types.
Regards,
Josh

there are no real pros and cons - just philosophy
We're using the SAP given material types, even adjusted to our needs, already for many years from 3.1 to 6.3 release and had never any issue with hotpackages or ith release changes.
We are using as well many own material types created by copy of SAP material types.
the only issues I know are, that the users need some time to understand which type to use if the description appears twice.
(Remember, it is a personal setting if keys are shown in dropdown lists, and I know many user who do not display the keys)

Pro's and Con's

Hey Guru's
My client has made a request to have the functionality in the portal to launch the SAP GUI from the portal. Just to be clear they are not wanting transaction IView 's just a link that will start the SAP GUI and has SSO. I'm looking for a the pro's and con's of doing this in the portal. And also any config notes you may have.
Thanks in advance for any help.

Yes, you can package them together.
Now Cisco has a better way. Cisco UCS Manager provides two main advantages over past firmware provisioning:
• The capability to group multiple firmware components together in one package
• The capability to apply a firmware package to any compatible server in a single operation
Cisco UCS Manager provides an accurate, easier, faster, more flexible, and centralized solution for managing firmware across the entire hardware stack. Service profiles in Cisco UCS Manager abstract the physical hardware from its software properties. Service profiles allow administrators to associate any compatible firmware with any component of the hardware stack. Simply download the firmware versions needed from Cisco and then, within minutes, totally provision firmware on components within the server, fabric interconnect, and fabric extender based on required network, server, and storage policies per application and operating system.
here is the document
http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns944/white_paper_c11-588010_ps10279_Products_White_Paper.html

Pro's and cons of becoming SAP functional consultant

Dear All,
I am shifting towards SAP functional consulting job. I want to know the Pro's and con's of SAP functional consultant job.

You can unload a lot of work on the technical consultant / developer and let him join the logical dots of what you're trying to design, and you get paid 50% more on top, now how's that?
All you need to do is look business and talk business.
Thomas
P.S. wait, I'm a technical consultant, arrrgh...

Pro's and Con's of having Single SAP BI System to multiple BI system

Hi Gurus,
We are presently in One SAP ECC and One SAP BI landscape for two of our customers belonging to Same Parent Group.
Now we are implementing SAP for 4 more customers belonging to Same parent group in different SAP ECC system.
As part of BI solution,these 4 customers chosen the SAP BW as OLAP system, Now can some one explain the pro's and con's of having multiple SAP BI systems to one SAP BI system for all customers.
Main issue will be the Master data management from all the 6 customers where there are chances that either one or two customers might have same GL account codes or Vendor Keys or Cost centers,which may effect dataloads for their respective Master Data (Attributes, texts & hierarchies) infoobjects.
If we chose multiple SAP BI systems,is there any product with in Netweaver where we can derive KPI's from each SAP BI system separately and consolidate into one reporting Dashboard's or Scorecards. We may expect some further calculations and formulas in the KPI's from two different SAP BI systems.
Can some one help us in providing some inputs to the above scenario?
Thanks & best regards,
Sudhakar.K

Suhakar,
I am not an expert in WAD and Visual Composer, so I will withhold comment. Your organization may have requirements which push to BO regardless of your underlying BI implementation.
Yes, the display of text/key can be a small sticking point. Currently I am working with an SRM reporting scenario where we have objects such as Vendor from many different ECC systems, and the key is compounded with 0LOGSYS. This makes the key display as ZSRCSYSKEY/ZVENDORKEY. One workaround, is to put 0LOGSYS on the row of the report, and hide the attribute, as from the user's point of view, they do not care to see which source system the Vendor comes from.
There would be nothing to prevent you from spawning off separate copies of the BEx query for each source system/group of users, if they have requirements for a slightly different display of data. But the point is, you can still get a consolidated view of your key figures across all business units if it is modelled into one system, regardless of which UI is used.
I think regardless of the path you take, there will always be challenges. I always prefer to address the challenges via modeling, rather than at the UI layer.
Now however, if you already had separate BW systems in place for each regional business unit, putting a new dashboard tool to pull the data together might be a simpler solution.

Pro's and Con's for Auto activation of ID Objects

Hi
Can anyone provide me the Pro's and Con's of having Auto activation enabled for ID Objects.
Regards
Osman Abdul Aziz Jabri

Hi Osman,
The Pros of Auto activation is all objects which do not need any manual configuration will activated. But the problem is in one transport (and in one tpz) you might have some object which needs manual configuration before activation and in this case the auto activation is failed.
So i would suggest not to use auto activation feature for ID. Please refer the below SAP Note
1805662 - PI Communication Channel CTS+ transport error: Enter a value for attribute
regards,
Harish

Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do

Hi, I have a 3 year old Macbook Pro 13" and I accidentally cracked the outer screen of my mac book, however the LCD panel is fine and works well. Please advise what to do. I live in India and I have gone to authorised Apple technicians and they infomed me that I will have to replace the LCD panel as well even though it is not cracked, is this really true or can I just change the outer shell? Also they say that they cannot do it in India... can I do it myself at home?

Since it is 3 years old find a local repair shop that can replace the glass Only. you may have to send it out to a Non Local shop for that but there are some that specialize in doiing that on Mac notebooks.
Apple will ony replace the complete screen enclosure with all normal parts included, LCD, Camera, Aluminum housing and glass as one unit. Which is very expensive. Or you could just use it as a desktop system with external monitor and buy a new notebook.

When i tried to reinstall my lion to macbook pro 15'' and connect it to the net it says no installing information for this machine? what's that means??

when i tried to reinstall my lion to macbook pro 15'' and connect it to the net it says no installing information for this machine? what's that means??

The internal drive has failed.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Pro's and Con's if i run multiple host firmware packages in the single chassis

hi
i would like to know pro's and Con's if i run multiple host firmware packages in the single chassis.
Like if my UCS is running with firmware of 1.4.1m ( having backup of 1.3.1 and 1.1.1j) with 3 blades in one chassis
can i assign service-profiles having three different host firmware versions
Server1 - host firmware 1.1.1j-- win2k8
server2 -host firmware 1.4.1m -- RHEL 5.6 ( OS)
server -host firmware 1.3.1 -(esxi 4.0)
Thanks in advance ,please replay if can i go ahead with this . ASAP

Yes, you can package them together.
Now Cisco has a better way. Cisco UCS Manager provides two main advantages over past firmware provisioning:
• The capability to group multiple firmware components together in one package
• The capability to apply a firmware package to any compatible server in a single operation
Cisco UCS Manager provides an accurate, easier, faster, more flexible, and centralized solution for managing firmware across the entire hardware stack. Service profiles in Cisco UCS Manager abstract the physical hardware from its software properties. Service profiles allow administrators to associate any compatible firmware with any component of the hardware stack. Simply download the firmware versions needed from Cisco and then, within minutes, totally provision firmware on components within the server, fabric interconnect, and fabric extender based on required network, server, and storage policies per application and operating system.
here is the document
http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns944/white_paper_c11-588010_ps10279_Products_White_Paper.html

What are the pro's and con's of the 4s?

Similar Messages

Maybe you are looking for