What are the proper setting for connecting a mic to the line out?

How should I set this up in my system and garageband preferences?

http://thehangtime.com/gb/gbfaq2.html#micline

Similar Messages

What are the line code methods used in ISDN ?

a link would be appreciated.
thanks!

Ok got it. Check here under each switch type for the line coding:
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080093d6d.shtml#top2

What are the AM Tuning parameters need to be set for 500 concurrent users

Hi All,
We are using JDEVADF_11.1.1.5.0.
What are the exact AM parameters(Pooling and Scalability tab) to be set when we planned for 500+ concurrent users?
Along with this do we need to set any parameters at weblogic server level, if any please give inputs.
Any input's would be appreciated.
Thanks in advance.
Regards,
Dinesh

We can?t give you exact numbers as there are many factors influencing the performance. In hte end you have to make a load test to find the right set of parameters. A good starting point is Andrejus's blog Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Internal Connections and Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level
Timo

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G? My plan with was to go for wi-fi and connect to the internet through my iPhone 4. Am I missing out on anything by not getting 3G?

What are the benefits of buying an iPad 2 with wi-fi, or with 3G when I already have an iPhone 4 with 3G? My plan with was to go for wi-fi and connect to the internet through my iPhone 4. Am I missing out on anything by not getting 3G?

James9901 wrote:
I tried the tethering and hated it. The connection breaks every time I get > 25 feet from it and it's a pain to reestablish the connection. I suppose if I had to choose between breaking connections every now and then or paying another $100 + $25/month I'd do the tethering.
Or just carrying the phone in your pocket? Just saying.....

What are the settings in i phone 4s for connecting internet in mobile data ?

what are the settings in i phone 4s for connecting internet in mobile data ?

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

What are the Trading Card Games for iPod touch that doesn't requires Internet connection?

What are the Trading Card Games for iPod touch that doesn't requires Internet connection? Suggestions, please.

Why not look at the apps and fine out?
The odds of someone here knowing that are slim to none.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What are the Pre-requisite to set Deletion Flag for Maintenance Order ?

Hi Gurus,
              Pls give me what are the pre- requisite to set the deletion flag.
              I want to set deletion flag to some Maintenance Orders which are with notification, but deletion flag - SET,RESET Indiacaors are inactive.
              Following are my observations-
              1) Order is not yet released.
              2) No actual Cost is with the order.
              3) No PR and POs are with the Order.
Pls guide me.
With best regards,
narendra

hi
you can put the deletion flag only when the order has the status CLSD or the balance of the order must be Zero
you can refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/8d/3e65a0462a11d189000000e8323d3a/content.htm
regards
thyagarajan

What are the skill sets required for a PCR consultant?

what are the WebDynpro skill sets required from the PCR consultant.

Hi
Follow the previous reply further take some input from these threads
1.[PCR and Netweaver Developer Studio |PCR and Netweaver Developer Studio;
2.[PCR in Portal 6 |/message/126419#126419 [original link is broken];
Best Regards
Satish Kumar

What are the best archiving methods for small colleges?

Hi Folks,
Im thinking a few terabyte hard drives will be my best option for a hundred dollars each.
We have a small operation here at a New England college with two editing systems that get a good amount of student use and use by myself for college needs. Some of the student work will get deleted at the end of each semester, but I need to save all the college's video.
What are the best ways to archive? Some of my concerns are cost and space. I can afford a few externals, do any of you have a nice cheap solution?
I understand if I am to go the route of archiving on externals I should have a backup of my backup, do any of you guys have any feedback on ghosting your backups, is that common?
thanks
Mike

If it's JUST for backup (not operation), you can get bare drives and either an enclosure for 1 or 2 drives with no tools trays (like the ones from Sansdigital: about $120 for a 1 drive enclosure) or a device like the UltraDock from Wiebetech (I use the latter). Physically install (or connect in the case of Ultradock) a bare SATA II 3.5" drive, connect it via USB 2, Firewire, esata, initialize/erase it, and then copy your files.
Then store the drive carefully in the foil anti-static bag it came in a dry location where it won't get jostled about by errant students (or kids in my house).
The savings in not getting full drive enclosures in the cost of multiple power supplies and interfaces. You pay for that once with the mountable enclosure / drivedock, and thereafter, just buy bare drives.
I also like another reply: have the students provide drives on which to back up their projects. A friend of mine has a ProTools audio studio, and part of his "set up" charge, is $100 for a bare drive that he will archive for 5 years, or the client can take with him at the end of the project (when the bill is paid).
Eddie O

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the Settings for DefaultFreq as YTD...

Hi Experts,
If I want to set “DefaultFreq” as YTD, what are the settings I have to do.
1) In Application profile (Time Periods, View, and Periods).
2) In Scenario (DefaultFreq and Default View).
And also the load data file format.
Pls explain me in detail.
Thanks in advance
Sai

Hi Sai
1. When you are creating the frequencies in Application profile for MTD, QTD or HYTD Frequency, System Automatically creates the YTD Frequency.
So no need to do any changes for Application Profile.
2. Create a scenario name with YTD, like Actual,Budget...
In Scenario Dimension mention below details.
Member- YTD (YTD is Scenario name)
Description –YTD Scenario
DefaultFreq-YTD
DefaultView-YTD
ZeroviewForNonadj-YTD
ZeroviewForadj-YTD
DefFreqForICTrans-YTD
3. To Load the Data into HFM Select the Scenario: YTD and Period: *[Year]*
Select the Proper POV to load the DATA.
Scenario:YTD
Year: 2012
Period:[Year]
View:YTD
Entity:India
Value:INR
Account:ExtSales
ICP:[ICP None]
Custom1:NOCC
Custom2:NO Cust
Custom3:[None]
Custom4:[None]
Sample Data file
!Data
YTD;2012;[Year];YTD;India;INR;ExtSales;[icp none];nocc;no cust;[none];[none];90000
All the best......

Regards
Dev

What are the settings required to block a particular IP to make connection on particular port no running on another IP?

Problem:
-   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
Environment:
Operating System            : - Windows XP Service
Pack 1
System type                     : - 32 – bit Operating System
Description: - We
have requirement to block Port access from particular IP. It is specific requirement for a machine.
We have service which is running on
Server with IP: - 10.14.15.116 on
Port Number 3366 and we need to
block Client Machine IP: - 10.14.15.114 to make
any connections with server on this port. Not even client machine
should be able to telnet on server on port 3366.
I
will be really thankful.
For any kind of input which can assist us to complete the requirement.

Does it allow in same way with firewall setting in Windows Server 2008?
I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
I
will be really thankful

What are the announcements for renting VPS?

What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev

What are the proper setting for connecting a mic to the line out?

Similar Messages

Maybe you are looking for