What are the query errors can be rectified using trns code rsrt?
Hi all,
Can anyone let me know the sigifiance of trns code rsrt? with examples. Nor can anyone send me a documentation about rsrt describing its functions and significance.
What are all the errors will be rectified using rsrt ?
regds
hari
hi,
RSRT : Query monitor to debug and test the queries. U can test IGS(internet Graphical Service) also.RSRT is to scan the query as to how the query gets executed, whether it uses aggregates or cubes, full table scan or uses index, etc.
You can also change the performance of a query under the 'Properties' tab.
If you switch the Read Mode to 'A' - 'Query to Read All Data at Once', it can really kill the query performance. Instead of reading data with each navigation, it reads it all before it loads. It will speed up navigation after the report has rendered, but kill the load time.
The 'Generate Report' button can be used with the report has become corrupt. It will regenerate the report. It hasn't happened many times, but I've had reports that just failed to run when no change has been made. Regenerating the report fixed it.
Execute + Debug is a lifesaver when you need to trace user exits in your report. It has a lot of neat options
chk this link..
http://help.sap.com/saphelp_nw04/helpdata/en/a0/2a183d30805c59e10000000a114084/content.htm
hope it helps..
Similar Messages
-
Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, MuhammadFirst, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful. -
What are the possible errors that can happen in data loads(rsmo monitor)?
hi all,
what could be the error that could result in red color in the RSMO monitor of data load transaction?
1. request everything ok
(what are the possible error type which make here red)
2. extraction everything ok
(what are the possible error type which make here red)
3. transfer (idocs and trfc) error occured?
(what are the possible error type which make here red)
4. processing
- data package
5. process chain
(what are the possible error type which make here red)
6 other messages.
(what are the possible error type which make here red)
thanks
poojaHi,
I can tell you the most common reasons of these failures.
1. request everything ok
Here it will be telling you if the request was properly send to source system and got triggered there.
2. extraction everything ok
In this step the actual extraction of data happens, issue slike sysfail or CPIC error may cause this to fail.
3. transfer (idocs and trfc) error occured?
When extraction is complete and data is being send to BW. But if dur to some reason it fails, error may come here.
4. processing
Processing in BW fails for each data packet is displayed here.
This can also happen when you have sysfail in source.
5. process chain
This can show the logs of the chain here and also status of subsequent process.
6 other messages.
Any other error message.
Refer
What is the information we can get the through details tab in RSMO
working with RSMO errors
http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
Also
Data Load Errors
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Data Load issues
Errors in loading
data loading errors
load Errors
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Hope this helps.
Thanks,
JituK -
What are the common errors we get in supporting project
can any body reply what are the common errors we get in supporting project
for abapers tickets will get or not.
what type of tickets generally get regarding reports.<b>SAP Tickets</b> are nothing but problems or issues raised by the end
customer in a company where end users are running SAP project.
Once the SAP project is implemented, support phase begins. Support
team is responsible for solving the tickets/issues in day-to-day
business.
For any support project, customer will set up Help Desk. If any
problem occurs customer will call Help Desk and register the
issue/Ticket.
Different companies use different software products to manage SAP
Tickets. Remember this software is not provided by SAP. It is third
party software. There are many software products in the market like
Manage Now et c. You can call these software products as tools.
All tools will provide the common attributes which are listed below-
1) Every user will be provided with user name and password to enter
into the tool
2) We can see the tickets assigned for a particular user name.
3) You can list all open tickets by giving the Date Range
4) You can list all closed tickets by giving the Date Range
5) You can list out all the open tickets assigned for an User
6) You can list out all the closed tickets assigned for an User
7) You can see the description of the Ticket, by entering the Ticket
Number. You can see who had raised the Ticket, what is the problem.
What is the severity of the Ticket?
There are lot many other attributes like you can transfer the Ticket
to another user etc.
<b>What is the severity of the problem Ticket?</b>
When a Ticket is raised, it will be given severity. There are
following severities. It may vary from company to company.
Severity 1
Severity 2
Severity 3
Severity 4
The severity will be decided based on the business critical impacts.
If there is large impact on the business it
will be given 1 severity, if it is having least impact then it will be given 4.
Severity 1 problem tickets should be solved in 8 hours.
Severity 2 problem ticket should be solved in 16 hours.
Severity 3 problem ticket should be solved in 15 working days.
Severity 4 problem ticket should be solved in 30 working days.
Again the no of days may vary from one company to another.
All these things will be decided when giving the contract to the IT
company. The agreement is called as "SLA".
SLA stands for Service Level Agreement.
What happens if a particular ticket is not solved by the IT company
according to the SLA/Contract?
The Customer imposes fine on IT company as per the contract/SLA.
<b>Errors in Extraction</b>
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any
infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light
error message:
Master data/text of characteristic ZCUSTSAL already deleted
1)extraction job aborted in r3
2) request couldnt be activated because theres another request in the
psa with a smaller sid
3) repeat of last delta not possible
4) datasource not replicated
5) datasource/transfer structure not active
<b>Issues faced during the implementation :</b>
1. Slippage of milestones
2. Incorrect or wrong design
3. Reporting format problems
4. Data not matching or reconciling problems
5. Issues discovered during testing leading to redesign
6. Performance issues
7. Requirements misinterpretation
9)check the data same in source system and target system ( i mean
suppose u are extarcting from r/3 after loading check ur data r/3 and
bw same or not.
10)that is abap code, i didnt understand ur question properly.
11)
12) generic extarction, if ur businees contect satisfy ur requirement
u go for generic, suppose u need data from different tables go generic
with view with 1:1 relation 1:M relation for function module.
13)v3 update back groud job is in lo
14)its superior info object, u can find this in master data tab .
15)
16)tuning we will go for improve query performance (compression,
aggregates, partation, index, rollup, precalculated web tneplates.)
17) rsa7(check with some one)
18)bw statics for find data base time and olap time and frontend
time(based on u can improve query performance create like aggra comp ,
indices etc..)
19) direct chain only one chain , meta chain if u have more than one chains
load errors u can solve manually, other than load errors u can wait
right click and repeat.
20)
21) u cn cteate other cube and traansfer, but data space waste.(bec
structures will be deffi)
22) u mean data source enhancement.or not(let me know)
23)rsap0001( for customer exit variables) 001 for transaction data 001
attributes, 003 text 004 hierchies.
24)web application design , its like same bex, but report will execute
in browser.
25)
26) arrangement of process are called process type and we can use
varient and start process for back ground jobs.
<b>Don't forget to asign points</b>
regards
ravish -
What are the common error while EBS installation in Unix /windows
what are the common error while EBS R12 installation with os unix and windows.
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?
regardsHi user;
what are the common error while EBS R12 installation with os unix and windows.AFAIK there is no document which show common error.There are some common error for installation like:
RW-5004- RW-50010 etc.
For error we have to check instalaltion log files for can get more details about it
oracle have any any check after installation all installation are correct according to no of directory, files and file size ?Oracle has 2 checking mechanisim during installation.
1. Before start installation, rapidwiz makes Validate system Configuration check which is checking port avaliability,file system check etc.
2. End of the installation,rapidwiz makes Validate system Configuration again to check jsp,dbc file, db avaliablity etc..
For more details Please check:
For r12.1.1:
http://download.oracle.com/docs/cd/B53825_01/current/html/docset.html
For r12:
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
Hope it helps
Regard
Helios -
What are the query types,Objects CRM provides for third party
What are the query types,Objects provided by the CRM so that it can be called by third party for integartion pupose.
First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful. -
What are the general errors will come in data uploading
Hi Friends,
What are the general errors will come in data uploading
Thanks in AdvancePaul
It all depends on how we configure the system. Errors may be different for different scenerios like
User ALEROMOTE Loacked for master data's
Data Sourcs has to be replicated
Activation Failures
Error occures in data Selection Etc.
Do you have any specific error so that we can work on that.
Thanks
Sat -
What are the common errors in reporting and extraction.
hi friends,
what are the common errors in reporting and extraction for implementation and support projects.
thanking u
suneel.Hi Suneel,
Errors in reporting are like incorrect query creation, errors in creating RKF, CKF and variables, misunderstanding the data, or errors with other tools like broadcasting. Errors in extraction relate to source system connectivity, field-infoobject mapping, incorrect code etc. Also, please search the forums and you will find many real time examples.
Hope this helps... -
What are the reporting performances can we do?
What are the reporting performances can we do?
Hi,
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Hope this helps.
Thanks,
JituK -
What are the common errors we wil get in BDC?
what are the common errors we wil get in BDC?
hi sunil
BDC errors are similar to what you get in online transaction. Suppose you enter an invalid material number in online ME21N ( create Po ) system will throw an error and you have to correct it by chnaging a valid material number . Same error you can get in BDC as well. It is very difficult to generalize types of error as errors will depend on the transacation you are doing.
However some of the common BDC errors are ( Data for Screen Not Found, Field Not available in Screen ). These again are transaction specific and you have to analyze it by calling the transacion in display ALL mode.
The errors you get depends upon the transaction you are
running.
This is how you handle:
Let's consider you are recording for the transction CJ40
(Messages table declaration )
DATA :BEGIN of t_msg occurs 0.
include structure BDCMSGCOLL.
DATA END of t_msg.
Handling it :
CALL TRANSACTION 'CJ40' using T_BDCDATA MODE 'N' UPDATE 'S' MESSAGES INTO t_msg.
commit work.
If you want to display the errors in the screen you can use a function module named 'RPY_MESSAGE_COMPOSE'
This gives you the corresponding message for the message number that you input.
Below is the sample code
Loop at t_msg. " Messages internal table
w_msgid = t_msg-msgid.
w_msgno = t_msg-msgnr.
w_msgv1 = t_msg-msgv1.
w_msgv2 = t_msg-msgv2.
w_msgv3 = t_msg-msgv3.
w_msgv4 = t_msg-msgv4.
CALL FUNCTION 'RPY_MESSAGE_COMPOSE'
EXPORTING
LANGUAGE = SY-LANGU
MESSAGE_ID = w_msgid
MESSAGE_NUMBER = w_msgno
MESSAGE_VAR1 = w_msgv1
MESSAGE_VAR2 = w_msgv2
MESSAGE_VAR3 = w_msgv3
MESSAGE_VAR4 = w_msgv4
IMPORTING
MESSAGE_TEXT = t_text-text.
TABLES
LONGTEXT =
EXCEPTIONS
MESSAGE_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MESSAGE_TEXT contains the message.
Please reward points if this explanation useful.
Regards,
navjot
reward points -
hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india
Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.
-
What are the tasks we can do with Maintenance Optimizer
What are the tasks we can do with Maintenance Optimizer?
Hi,
All Corrective Packages for SAP NW04 , NW04s and SAP Business suite delivered after 04/02/2007 will only be available via SAP Solution Manager MOPZ
Also it Reduces risk, Increase transparency and Prepared for Future.
Thanks
Vijay Kothapalli -
What are the reports we can get from OPM Quality
Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
JonPl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini -
What are the things we can do through BASIS?
Hello everybody,
I am newcomer in basis, I wish to know the some of the basic
questions such as,
what are the things we can do through basis?
what are the basis components?
How the basis components are actually works?
Thanks & Regards,
RajeshHello,
Check these threads on BASIS:
basis info...!
New in SAP Basis
XI Basis Samples
Note:Points always encourage me to reply !! -
What are the parameters? can u say what type of parameters regularly used?
what are the perameters? can u say what type of perameters regularly used?
Dear Srikanth
Thank for your up date . in my case the customer is assigned with two sales area. The org model , nothing is maintained in the attributes , still one is appearing in the pop up and and other one is not . It is surpricing.
if you can mention the logic of maintaining the division and distribution channel inthe attribute it is of great help.
Regards
Raj
Maybe you are looking for
-
OS X Mountain Lion and log-in icon:
Once I installed the OS X Mountain Lion, the log-in icon that appears when you turn the MacBookPro on or wake it from sleeping changed from a keyboard to a softball. I have exhausted all of the setting possibilities and still cannot change it...Any
-
Using Table Model as a Grid?
Would it be possible to add JButtons(or JPanels) to create cells in a Table Model implementation? How would I go about this? Would I then be able to listen for events from these JButtons using the methods native to table model such as getValueAt(int
-
Multi-core threaded program pauses
I tried to exercise two of my quad cores using timed loops, but when I set the times down to 10 and 20 msec then the display pauses and LabView becomes non-responsive. I have a DELL Precision 7500, so these are Intel processors. Is the graphics cau
-
Call Manager 4.13 Multi-Level Access Question
I need to configure MLA and have read the CCO documentation. My question is - I'm not familiar with the ccmadministrator account and want to make sure that when I'm prompted to reset the password to this account immediately after enabling MLA - that
-
PSE9 Organizer launches then immediately closes!
I have a Dell XPS 610i with 500GB hard drives (Raid 1, mirror images) and am running Windows XP. I had been having lots of issues with it so I backed everything up and just reset it back to factory delivery conditions. I reloaded all my non photo fil