What are the random swoosh noises...
After I log in within the first 5 minutes I will hear that random swoosh noise. Like the noise you hear when you have new e-mail in your mac mail inbox. But the thing is I have not set up the Macmail thing so I don't know why I hear that random swoosh noise within the first 5 min of logging in. Nothing pops up or anything I'll just hear that noise.
I checked my console and it shows nothing that would possibly make that sound. So what could it be?
Message was edited by: paperxtiger
Message was edited by: paperxtiger
thanks...i did that and noticed i still had virus barrier and google updater running and i removed those items before but didn't properly uninstall VB X5 and the google updater thing was still running for some reason...so i reinstalled it [VB X5] and then uninstalled it properly...and then searched for the google folder in my library and trashed it...now i don't hear those sounds anymore...
i would have never though of looking at my activity monitor...thaks again for the help.
Similar Messages
-
What is the "Random Noise" specification in the AI Absolute Accuracy Table
I have a PCI-6255 board that I'm planning to use for some sensitive measurements.
I'm trying to put together an end-to-end error budget and I have a couple questions.
My model is in terms of analog-to-digital converter counts (also known as LSB in your data sheet).
In the Absolute Accuracy table on page 5 of the NI 615x Specifications I see a column labeled Random Noise, (uVrms).
I think I understand the residual gain error, residual offset error, and associated Tempco, and the INL error but the Random Noise is puzzling me.
Here is why: on the +/- .2V range, the random noise is 16 uV. On this range, the ADC resolution is 6.1 uV so the random noise is about 2.6LSB
If I look at the +/-5V range I see a random noise of 140uV. On this range, the ADC resolution is 305uV so the random noise is well under one LSB.
Therefore, in my error budget I can use "1 LSB" for the random noise when on the 5V range but I have to use "2.6" or "3" LSB when on the .2V range.
I expect a signal of aproximately 150mV riding on a 2.5V DC level. I was concerned I might need to offset the signal (remove the 2.5V dc) in order to use the +/-.2 volt range to get better resolution. I also thought I would get better noise performance too. In looking at the numbers here though it looks like I would be better off using the +/-5V range (assuming it gives good enough resolution) because the readings have less noise counts (even though it is more noise volts).
I can account for the Gain Error and Offset Error by injecting known signals and doing a "software correction". Not sure, but I believe I can also correct for the INL if I use a polynomial fit of 2nd or 3rd order. It's the random noise I'm having problems understanding.
Here's the question: what is the Random Noise shown in the AI Accuracy table for the 625x boards? Can you give an example of how NI might have measured it?
Secondly, note 2 says "Sensitivity is the smallest voltage change that canbe detected. It is a fucntion of noise." Was this measured with a signal-to-noise ratio of "1" or "2" or some other standard, or is this a calculated value?
Thanks
MGwrong forum. Sorry. I'll repost in proper forum
-
What are the pro alternatives to Compressor?
I've been compressing a lot of material recently, mostly shot on DVCPRO HD and edited on FCP. What's been happening is that some - but surprisingly not all dissolves - are breaking up into pixels or rather blocks of pixels. The problem, as I've recently found out, has been documented here so I won't waste anyone's time agonizing over it. I'll just say that using Compression Master, Sorenson Squeeze and bitVice produced artifacts free files right off the bat.
What's infuriating about the Compressor is that every time I try to test a short piece from the middle of the sequence, it compresses fine but then when the whole 20 min sequence is compressed the problem comes back.
I've tried CBR, closed GOP, IP structure etc as suggested in one of the posts and it did get rid of the pixelation but I'm still not happy with the results. The picture looks a bit soft and washed out. Shockingly comparable to a well compressed random, internet downloaded DivX file that I can play on the same player. Is it the Compressor, DVDSP or the true nature of the DVCPRO HD format showing its ugly face?
What are the professional MPEG encoders that could save me all that headache? I'd rather pay good money and finally get it done right than spend my time beta testing software that is clearly not ready for the prime time.Never had problems whit Apple Mail. Till I updated to Maverick.
First problam was Gmail after updating to Mavericks, Apple mail went to download all my old mail's over 6800. Just delleted my Gmail account form the list to stop it.
Second issuu memory.
First dit not now what was te problem till I found out that Apple Maill took over al my memory. Try differened tip and trick of the Apple Forums. This one works the best. Other users had the same problem after Mavericks.
I restore my Accounts.plist form before the Maverick update.
Looked whit TextWrangler but what am i lookong for? Do not know how is supposed to look.
Size of Accounts.plist on 11/18 1.7MB
Size of Accounts.plist on 23/18 3.0MB
Hoping for the best .... -
Laptop editing with Premiere Pro CS4: what are the most important specs
Laptop Editing: What are the MOST important specs?
Hello everybody, I have been a long time lurker, but I decided to join in and share my voice.
I've been editing, for a while now, various projects of various lenghts shot on my HV20, on an IMac using Adobe Premiere Pro. Actually, I bought the CS4 Extended Production Suite last year thinking that it made sense to be able to edit, do the coloring and effects+ sound all within the same suite.
AND, it came with OnLocation, wich is, I think, a fantastic tool. I really want to be able to record and monitor my future shoots using OnLocation. I've seen how useful monitors and scopes are on set, and the idea of being able to shoot in HD and actually checking the focus on something larger than a few inches is very appealling!
So a laptop is in my future. Now, what are the most important specs?
I could buy 1) a barely used Macbook pro early 08- 17" HD led display ,4g Ram ddr2 ,nvidia 8600M GT 512 VRAM ,800Mhz BUS, 200G 7200HD
and have enough money left to buy an Apple Display 30" refurb
OR 2) a new Macbook pro 17, 4 g Ram ddr3, 512 VRAm, 4g Ram ddr3, double procsessors 9400M+9600M GT 512 VRAM, 1066 BUS, 500G 7200HD
and wait for a second display!
Plus, of course, a portable External Scratch Drive on the Express Card. Now, if that fast drive is handling the footage, could'nt I settle for a 5400HD in the laptop,, they seem much less prone to problems-clicking noise, heat-than the 7200, especially in the new unibody model. Is 800 versus 1066 BUS a terrible trade-off? In terms of secondary displays , I've heard less than lukewarm things about the new Apple 24 LED (glossy is no-no for me).
My intentions are to make documentaries and short fictions as well. I make a living as an actor so I don't need to be performing as a director/editor business wise!
I do want to explore that side of the craft, in a professional and enjoyable way though. I know that, in addition to the laptop, I will get a MacPro in a few years.
Thanks a lot for the inputs!Successful video editing (as compared to tear your hair out video editing) requires at least two hard drives... one for all software and one for all data... some people use 3 drives, with data on one and scratch files on the 3rd drive
I'm not sure about software, but everything I've ever read in this forum says 5400 is NOT fast enough for the data drive
If you want to edit video... you have to buy the hardware that works -
Laptop Video Editing: What are the MOST important specs
I've been editing, for a while now, various projects of various lenghts shot on my HV20, on an IMac using Adobe Premiere Pro. Actually, I bought the CS4 Extended Production Suite. It came with OnLocation, which is, I think, a fantastic tool. I really want to be able to record and monitor my future shoots using OnLocation. I've seen how useful monitors and scopes are on set, and the idea of being able to shoot in HD and actually checking the focus on something larger than a few inches is very appealling!
So a laptop is in my future. Now, what are the most important specs?
I could buy 1) a barely used Macbook pro early 08- 17" HD led display ,4g Ram ddr2 ,nvidia 8600M GT 512 VRAM ,800Mhz BUS, 200G 7200HD
and have enough money left to buy an Apple Display 30" refurb
OR 2) a new Macbook pro 17, 4 g Ram ddr3, 512 VRAm, 4g Ram ddr3, double procsessors 9400M+9600M GT 512 VRAM, 1066 BUS, 500G 7200HD
and wait for a second display!
Plus, of course, a portable External Scratch Drive on the Express Card. Now, if that fast drive is handling the footage, could'nt I settle for a 5400HD in the laptop,, they seem much less prone to problems-clicking noise, heat-than the 7200, especially in the new unibody model. Is 800 versus 1066 BUS a terrible trade-off? In terms of secondary displays , I've heard less than lukewarm things about the new Apple 24 LED (glossy is no-no for me).
My intentions are to make documentaries and short fictions as well. I make a living as an actor so I don't need to be performing as a director/editor business wise!
I do want to explore that side of the craft, in a professional and enjoyable way though. I know that, in addition to the laptop, I will get a MacPro in a few years.
Thanks a lot for the inputs!CPU, RAM, bus speed, system HD, external HD, graphics - basically in that order
You should think in terms of purchasing for maximum future use. In that regard the new 17" MacBookPro is the way to go. The specs are significantly better than the early '08 MacBook and you will be much happier in the long run with performance, software support and longevity.
If you really need a large display, consider a 24" Dell, HP, NEC, etc. in the $200-$300 price range to stay within your total budget. You will be pleasantly surprised how good they are.
You could start out with the 5400rpm system HD - you can replace it anytime with a 7200rpm drive if necessary for hardly any more $ than it would cost in the first place; and replacing it does NOT void your warranty. But you WILL want/need a good external FW800 or eSATA drive (for eSATA you will need an eSATA expressCard/34 however) no matter what.
One other thought, if your primary use will be with an external display, and you don't actually need eSATA capability (FW800 will do you just fine at this point), then the 15" 2.66GHz or 2.8GHz MacBookPro models will be just fine at a significantly lower cost than the 17" model. -
What are the major risks buying used lenses ?
i just bought my first dslr, and i was wondering what are the major risks buying used lenses ?
You need to be able to inspect and test the lens.
Look for obvious signs of physical damage, drops, etc. (cracks, dents, etc.) A lens normally will get some signs of wear but as it's a used lens, you expect *some* wear... you're really looking for signs of damage.
Remove both front and rear caps. Look through the lens into a bright no-contrast background (a white wall, a blue sky, etc.) and check the optics. You're looking for signs of mold growth or damage to coatings. Minor dust on internal optics wont impact the lens performance... so while you wouldn't want major amounts of dirt... don't worry too much about minor bits of dust (I've actually helped prove this to someone by clipping a 3M PostIt note down to a tiny 1/4" x 1/4" size and sticking it on the front glass. Take a photo... nothing shows in the photo (even a piece of "dirt" that big wont show because the camera cannot focus on anything that close to the lens.)
Rotate the focus ring from end to end. You should feel a smooth and consistent amount of friction as you rotate the focus ring. There should be no rough spots. Listen to the lens as you do this... there should be no grinding noises.
Do the same with the zoom ring but in addition to checking for smooth consistent performance (no sticky or rough spots) you're also checking to make sure nothing seems excessively worn (nothing wobbles loose... very heavily used lenses can do that after enough wear.)
Connect the lens to the camera and make sure the camera can completely operate the auto-focus motors without a problem and/or if it's an image stabilized lens that the IS components are working.
Set the camera to max aperture (e.g. f/22, f/32.. depending on the lens) and press your camera's "depth of field preview" button (if you don't know which button is your DOF preview, check your manual. Canon tends to move that one around a bit but it's almost always on the front side of the camera near the lens mount.) You want to press and release it a few times. This will cause the lens aperture blades to stop down to the aperture you set. Release... do this while watching the lens. You should see the aperture blades move in and out (well... they snap in and out very quickly). You want to make sure it works ok, the camera gets no error codes, and there's no signs that anything is sticking.
And then there is the focus test...
Focus the camera preferably at a FLAT surface that has lots of detail.... such as the brick wall of a building. Make sure the camera is level and that the camera's focal plane is parallel to the plane of the wall. Take a test photo at low f-stop and inspect. You're checking to verify that the focus works and that the focus is reasonable across the image. As you inspect from left ot right and top to bottom you are looking to make sure the focus is more or less equal (if the right side of the image is focused... but the left side of the image is soft... it would indicate that lens elements are skewed (lens isn't collimated). It's difficult for a lens to get into this situation unless it was dropped and you'd probably see signs of damage.
Tim Campbell
5D II, 5D III, 60Da -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the announcements for renting VPS?
What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev -
What are the different types of analytic techniques possible in SAP HANA with the examples?
Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C NarasimhamurthyHi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........ -
What are the different ways to handle deadlocks?
Hi,
May I know what are the ways to solve a deadlock problem?
Currently, I have the following code to catch the exception:
catch (XmlException ex)
try
ex.printStackTrace();
txn.abort();
} catch (DatabaseException DbEx)
System.err.println("txn abort failed.");
}and the resulting error is:
com.sleepycat.dbxml.XmlException: Error: DB_LOCK_DEADLOCK: Locker killed to resolve a deadlock, errcode = DATABASE_ERROR
Any other more efficient way to handle deadlock?
Or better ways to prevent deadlock from happening?
I am using this environment config
EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not exits,
// create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
// envConf.setCacheSize(25 * 1024 * 1024); // 25MB cache
envConf.setInitializeLocking(true); // Turn on the locking
// subsystem.
envConf.setInitializeLogging(true); // Turn on the logging
// subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
// envConf.setRunRecovery(true); //Turn on run recovery
// envConf.setTxnNoSync(true); // Cause BDB XML to not synchronously
// force any log data to disk upon transaction commit
envConf.setLogInMemory(true); // specify in-memory logging
envConf.setLogBufferSize(60 * 1024 * 1024); // set logging size.
// envConf.setTxnWriteNoSync(true); //method. This causes logging
// data to be synchronously written to the OS's file system buffers
// upon transaction commit.
// envConf.setThreaded(true); //default by Java that threaded = true
// envConf.setMultiversion(true);
envConf.setLockDetectMode(LockDetectMode.DEFAULT); // Reject a
// random lock
// requestThanks in advance for any help!
:)Hi Vyacheslav,
here is the code:
package ag;
import com.sleepycat.db.DatabaseException;
import com.sleepycat.db.Environment;
import com.sleepycat.db.EnvironmentConfig;
import com.sleepycat.db.LockDetectMode;
import com.sleepycat.dbxml.XmlContainerConfig;
import com.sleepycat.dbxml.XmlDocumentConfig;
import com.sleepycat.dbxml.XmlException;
import com.sleepycat.dbxml.XmlManager;
import com.sleepycat.dbxml.XmlContainer;
import com.sleepycat.dbxml.XmlDocument;
import com.sleepycat.dbxml.XmlManagerConfig;
import com.sleepycat.dbxml.XmlTransaction;
import com.sleepycat.dbxml.XmlUpdateContext;
import inter.DBInterface;
import java.io.*;
import java.util.Properties;
import cp.CheckPointer;
public class SaveMessageinDB implements DBInterface
Environment myEnv;
XmlManager myManager;
XmlContainer myContainer;
XmlTransaction txn;
XmlContainerConfig cconfig;
Properties properties;
// CheckPointer cp;
int Counter;
public SaveMessageinDB()
try
properties = new Properties();
properties.load(ClassLoader
.getSystemResourceAsStream("Aggregator.properties"));
setXmlEnvrionment();
setXmlManager();
setXmlContainer();
// cp = new CheckPointer(myEnv);
// cp.start();
// System.out.println("Checkpointer started....");
Counter = 0;
} catch (Exception ex)
ex.printStackTrace();
public void saveMessage(String docName, String content) throws Exception
addXMLDocument(docName, content);
public void setXmlEnvrionment()
try
File envHome = new File(properties.getProperty("DATABASE_LOCATION"));
EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not exits,
// create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setCacheSize(100 * 1024 * 1024); // 100MB cache
envConf.setInitializeLocking(true); // Turn on the locking
// subsystem.
envConf.setInitializeLogging(true); // Turn on the logging
// subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
// envConf.setRunRecovery(true); // Turn on run recovery
// envConf.setTxnNoSync(true); // Cause BDB XML to not synchronously
// force any log data to disk upon transaction commit
envConf.setLogInMemory(true); // specify in-memory logging
envConf.setLogBufferSize(60 * 1024 * 1024); // set logging size.
// envConf.setTxnWriteNoSync(true);
// This causes logging
// data to be synchronously written to the OS's file system buffers
// upon transaction commit.
envConf.setMultiversion(true); //Turn on snapshot isolation
envConf.setLockDetectMode(LockDetectMode.DEFAULT); // Reject a
// random lock
// request
// myEnv = new Environment(envHome, null); //To adopt Environment
// already set by others
myEnv = new Environment(envHome, envConf);
System.out.println("Environment created...");
} catch (Exception ex)
ex.printStackTrace();
// All BDB XML programs require an XmlManager instance.
// Create it from the DB Environment, but do not adopt the
// Environment
public void setXmlManager()
try
XmlManagerConfig mconfig = new XmlManagerConfig();
mconfig.setAllowAutoOpen(true);
mconfig.setAdoptEnvironment(true);
mconfig.setAllowExternalAccess(true);
myManager = new XmlManager(myEnv, mconfig);
// myManager = new XmlManager (mconfig);
System.out.println("Manager created...");
} catch (Exception ex)
ex.printStackTrace();
public void setXmlContainer()
try
cconfig = new XmlContainerConfig();
cconfig.setNodeContainer(true);
cconfig.setIndexNodes(true);
cconfig.setTransactional(true); // set transaction need an
// cconfig.setAllowValidation(false);
// environment
// cconfig.setReadUncommitted(true); // This container allow
// uncommitted read (able to read dirty data and not set a deadlock
// cconfig.setMultiversion(true);
myContainer = myManager.openContainer(properties
.getProperty("DATABASE_LOCATION")
+ properties.getProperty("CONTAINER_NAME"), cconfig);
System.out.println("Container Opened...");
} catch (XmlException XmlE)
try
myContainer = myManager.createContainer(properties
.getProperty("DATABASE_LOCATION")
+ properties.getProperty("CONTAINER_NAME"), cconfig);
System.out.println("Container Created...");
} catch (Exception e)
e.printStackTrace();
} catch (Exception ex)
ex.printStackTrace();
public void addXMLDocument(String docName, String content)
try
txn = myManager.createTransaction(); // no need to create
// transaction. auto commit
// by the environment
XmlDocumentConfig docConfig = new XmlDocumentConfig();
docConfig.setGenerateName(true);
docConfig.setWellFormedOnly(true);
myContainer.putDocument(txn, docName, content, docConfig);
// commit the Transaction
txn.commit();
System.out.println("documents added.....");
Counter++;
System.out.println("Document no: " + Counter);
txn.delete();
} catch (XmlException ex)
try
System.out.println("Occuring in addXMLDocument");
ex.printStackTrace();
txn.abort();
} catch (DatabaseException DbEx)
System.err.println("txn abort failed.");
public void cleanup()
try
if (myContainer != null)
myContainer.close();
if (myManager != null)
myManager.close();
if (myEnv != null)
System.out.println("All cleaned up done..in sm");
myEnv.close();
} catch (Exception e)
// ignore exceptions in cleanup
}Thanks! -
What are the best apps to monitor tests and emails on childs phone
what are the best apps to monitor tests and emails on childs phone?
You could simply log into your child's email with the password that the two of you agree upon, and monitor the emails manually. As for the texts, you could purchase a separate device, and use the child's Apple ID to monitor the iMessages. For SMS/MMS, no way to monitor it. You'll have to use the app called 'Random Parental Inspections'.
-
What Speed could i get & what are the errors
Hi Everyone.
I have just joined B.T & yesterday was my last day of the 10 day period.
Bin looking at my speed it hasnt gone up alot but i keep getting all these errors on the hub info so i would like to ask what are the errors please & does the speed look about right for me thanks Nick..
Short time for connection as B.T reset the Hub its a v3.0a
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
1 days, 06:08:58
Downstream:
4.931 Mbps
Upstream:
1011 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
5.5 dB / 5.8 dB
Line attenuation (Down/Up):
46.4 dB / 27.7 dB
Output power (Down/Up):
18.5 dBm / 12.6 dBm
FEC Events (Down/Up):
126408871 / 3607
CRC Events (Down/Up):
102820 / 739
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
91458 / 730
Error Seconds (Local/Remote):
32083 / 501Just enter your down attenuation here- http://www.kitz.co.uk/adsl/max_speed_calc.php there are things you can do to reduce errors like connecting to the master socket see if there is a difference, checking your wiring and housing of the hub etc. A explanation of errors here-http://www.kitz.co.uk/adsl/linestats_errors.htm
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack.... -
What are the differences between TestStand Version 1.0.2 and 1.0.3?
I have TestStand version 1.0.2 and have a customer that uses 1.0.3. I am updating test software for that customer and need to know if I can use TestStand 1.0.2. What are the differences between 1.0.2 and 1.0.3?
vc -
The Whatsnew.txt file for TestStand 1.0.3 contains the following text:
Changes from TestStand 1.0.2 to 1.0.3
TestStand 1.0.3 includes a translation to Japanese. It also
includes other fixes mostly related to translation issues.
1) Configure Database Options menu item was not localized.
2) Dismissing a modal CVI dialog brought a random window to the front.
3) Removed text from operator interface splash screens
4) Resized operator interface panels
5) In the TestStand - Sequence Display.vi of the LabVIEW operator interface, the
following control descriptions didn't use resource strings:
- Sequence Description:
- Current Test:
- Number of Tests:
6) The Engine Installation Wizard wasn't localizable.
7) Flexible MessageBox sometimes displayed only 1-2 lines. This was seen in the
Edit Database Options Help dialog and the Adapter Configuration dialog in the
CVI operator interface.
8) The buttons in the Automation Adapter Configuration dialog were not localized.
9) Font for the Add Directory to Search Directories checkbox on Find File dialog
was incorrect for Japanese Windows.
10) Dialog used to browse for directory to specify the report location was not translated.
11) Database Viewer was not localized correctly.
Scott Richardson
National Instruments -
What are the speeds of the USB Stick?
I've bought a USB Memory Flashdrive, its the USB2.0 2GB..
Can anyone tell me why I can't use this USB Stick for ReadyBoost?
What are the speeds of the USB Stick?
Kind regardsand for people who haven't heard about Windows Vista ReadyBoost:
http://blogs.msdn.com/tomarcher/archive/2006/06/02/615199.aspx
Q: What perf do you need on your device?
A: 2.5MB/sec throughput for 4K random reads and 1.75MB/sec throughput for 512K random writes
My speeds according to the site in the post above:
Reading speed:
8 MB/s (max.)
Write speed:
4,8 MB/s (max.)
Speed USB port:
60x / 2.0
this is all according to this site, I was looking for official details on the Toshiba site but couldn't find any so here I am... -
HT4437 what are the minimum wireless requirements for airplay regards wireless strength ( DBs)
What are the minimum requierments for Apple Airplay? i need to know how strong in BDs the system con operate down to?
It is not a matter of single strength. That only tells you the amplitude of the radio connections which tells you nothing. What really matters is the speed of traffic across the connection and the number of dropped/lost packets. And single strength tells you neither of these. Interfearance, noise, collisions due to too many WiFi connections in the area impact the connection. You can have strong single strength and not be able to maintain a connection.
Maybe you are looking for
-
Jason, My macbook was stolen. I bought a new one and need to copy my files from my iPod back to my new computer. How do I do this? Thanks. gonzobrains
-
How do you permanently delete trash in the deleted items folder?
I have over 4000 deleted emails in my deleted items folder. How do I permanently delete them from that folder? Thanks.
-
"Command Complete" notification
I just switched from Toad and it had a neat feature where the toad icon in my task bar would flash when a command was complete, is there anything similar in sql developer 4?
-
I have a second generation I Pod touch. How do I know which games I can download from the Apple Store?
-
Refund for shows that won't download?!
I purchased two episodes of The Sopranos and when I go to download them it says error downloading. Will they refund my money since I can't view them?!?