What are the reasons why Server Assistant won't detect Auto Server Setup ?

Hi there,
I've been having issues with Auto Server Setup mechanism (the mechanism that allows an administrator to install a machine without human user interaction). I actually have the answer to my post question but I post it anyway because it might help someone that stumbles on the same issue. Moreover, the answer raises other questions about licencing.
I had the problem that I had created a NetInstall image that had a "/Auto Server Setup/generic.plist" file; this worked perfectly on the XServe I was testing it on : when I started the client in NetBoot mode, the client was installing without any human interaction, from the disk formatting to the login window... all this was pefectly good. Then I tried to install another machine by starting it in NetBoot mode : the machine installed the system and then waited for human interaction for the configuration step in Server Assistant, as is there was no "/Auto Server Setup/generic.plist" file....
I finally managed to figure out what was wrong (not thanks to Apple, as I couldn't find any clue : no message from "Server Assistant", nothing useful in the logs I found just by luck in /Library/Logs/ServerAssistant.log) : my "/Auto Server Setup/generic.plist" was ignored because of the Mac OS X licence key. When I replaced the key in generic.plist with another key, it started working again. I know that the official documentation says to use site licences when using the generic.plist mechanism but at least an error message somewhere would have helped...
So, it seems that "Server Assistant" talks to apple servers and refuses to use a licence key that is used somewhere else. These policies are perfectly fine, as long as it works and it is consistent, which I'm not convinced of :
- first, we had success in the past in duplicating Mac OS X 10.5 system disk images (we have lots of xserves with valid licence keys but we found it easier to duplicate system disk images) on our xserves, and even if all xserves had the same osx server licence key, they worked fine (except that Server Admin doesn't like it). As a result, the licence verification policy is inconsistent as it depends on the way mac osX is installed...
- second, I'm not sure this licence checking mechanism even works : I beleive that apple registers associations between a machine id and a licence key; then, how does apple guarantees that this association (therefore free the licence key) is removed when you format a system hard drive (there is no other way to uninstall Mac OSX, right ?) ?
Does anyone knows how licence key registration works and more specifically how licence keys get freed for reuse on another machine ?

Hi Stephen,
To login, the internal server should be: https://boot.ciscojabbervideo.com/endpoint/configuration
The external server and domain fields are blank.
Your username only needs the prefix of your @jabber.com video address.  For example, if your video address is [email protected] then your username is "stephen."
Unfortunately, there is only forum support for this free service.
Regards,
Jason

Similar Messages

  • What are the reasons why a wideband modem can not take a CPE?

    I have an M-CMTS with RFGW1.
    I have the following settings:
    int c6/1/3
    downstream Modular-Cable 1/0/0 rf-channel 16-17 upstream 0-3
    int c6/1/4
    downstream Modular-Cable 1/0/0 rf-channel 18-19 upstream 0-3
    cable fiber-node 9
      downstream Modular-Cable 1/0/0 rf-channel 16-19
      downstream Cable6/1/3
      upstream Cable 6/1 connector 12-15
    cable fiber-node 10
      downstream Modular-Cable 1/0/0 rf-channel 16-19
      downstream Cable6/1/4
      upstream Cable 6/1 connector 16-19
    interface Wideband-Cable1/0/0:4
    load-interval 30
    cable bundle 1
    cable bonding-group-id 5
    cable rf-channel 16 bandwidth-percent 45
    cable rf-channel 17 bandwidth-percent 45
    cable rf-channel 18 bandwidth-percent 45
    cable rf-channel 19 bandwidth-percent 45
    the cable modem gets online, but does not take cpe, my question is why?
    D2.0 modems do take CPE, but the 3.0 modems do not. I know that may be a problem in the RFGW1 because another time I changed the port and it worked.
    but I would like to know the reason why only the wideband modems are not taking cpe.
    I'd like to hear from you.
    thanks in advance

    Hi Diego,
    - The first time that was put online, it became as w-online and take CPE (The DHCP assigned IP addresses both, Modem and CPE)- But it did not work, so I reset the modem, and went online again, (but did not have a CPE IP address)
    I'm not following you here. In the first point you mentioned that the modem came w-online and the CPE got an IP. However, in the second point, you mentioned that it didn't work and then you reset the modem. What didn't work (I understood the problem was CPE getting IP address which, as you mentioned, was done on the first point)?
    You also said that, at some point, the modem was online but not pingable. The CPE didn't get IP that time. In that case, was the modem online or w-online? What was the primary channel for this modem? Take into account that, for wideband, the modem uses the primary channel to register and perform all Docsis operation. Any data traffic (like a ping or a DHCP request from a CPE) will use the secondary channels. If these channels have some issue you may see an issue as the one described.
    For the D2.0 modem using Mo1/0/0:16, it could be similar as above. If this channel is OK but the rest have some issues, you could see a behavior like that. The D2.0 modem will use the primary channel (only channel) also for data transfer. Since this channel is OK, the D2.0 modem don't have any issue. However, if a D3.0 modem uses Mo1/0/0:16 as primary it may come online (since the channel is OK) but, if the rest of channels have issues, then you may have problem to pass data traffic.
    Did you check if D2.0 modem can use all the channels? You may also want to check the modulation profiles being used. It could be that you are using a lower modulation profile for ranging (initial, station maintenance) and a higher one for data transfer which may be affected by some condition in the network.
    Best regards.

  • I would like to know is why the light is yellow alert on the Xserve is blinking, I would like to know what are the reasons why do that.   Thank you very much beforehand!

    I know, because I had never turned on the light in yellow on the back and I see that has the logo warning, then I wonder what it was that or because ocaciono is giving that alert.

    Your question belongs in this forum:
    https://discussions.apple.com/community/iphone/using_iphone

  • What are the components I need to install on my apps server

    Hello All,
    Our Oracle DB 10.1.0.3.0 is installed on Linux Server.
    Oracle 10g Developer Site is installed on windows XP.
    I have upgraded form & reports form earlier version 6.0..
    Now I need to install Oracle Application Server on windows 2003 (x86) 32 bit.
    I never done this b4.
    My question is that ,
    what are the components I need to install on my apps server to run Forms & Reports?
    I am installing apps server on one machine.
    But when I read documentation they said its better to install on two machine.
    Regards,
    Diana

    Yes,
    I'm sorry to tell you but for forms and reports (BI) you need to install almost everything, you need to install an infrastructure as first components, and then a midtier for AS with Business Intelligence option, in this second component you can chose to install Reports, forms, OCJ4, Portal, any other component you need or you thik you will need in the future.
    You can install both in one Server if you don't have resources for 2 or 3 thinking on load balance. It works fine for me in one server but my operation is not too big.
    Carlos

  • What are the commands available to read a file from application server and

    What are the commands available to read a file from application server and store the file into an internal table?

    Hi,
    To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
    This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
    For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
    In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
    If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
    OPEN DATASET dset FOR INPUT IN BINARY MODE.
    . If a non-existing file is accessed, an exception that can be handled can be triggered.
    Influence of Access Type
    Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
    Influence of the Storage Type
    The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
    If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
    If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
    If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
    System Fields
    sy-subrc Meaning
    0 Data was read without reaching end of file.
    4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
    Thanks,
    Samantak.
    <b>Rewards points for useful answers.</b>

  • HT4949 what are the system requirements for mac os x 10.6 server?

    what are the system requirements for mac os x 10.6 server?

    While not 'intended', it is indeed possible on a portable. Exigent circumstances required me to re-role an aging MacBook Pro 2.16 Intel Core Duo to act as a server on a temporary basis.
    It boots just fine from an external drive running Server 10.6.8. I also believe that installation (while not recommended) is not actually blocked.
    Tip for the top: just be sure to pull the battery out of the laptop (assuming that's possible) to avoid turning your battery into a grossly distended, non-functional brick... they were not designed to be left on charge permanently!

  • What are the steps to change existing sharepoint 2010 farm database server to a new server

    Hi
    i have a sharepoint 2010 farm and backend with sqlserver2012 standard edition on windows server 2008 r2 server
    now what are the steps to if  want to  connect this farm to a new sql server 2012 on windows server 2012 server and remove this existing server
    adil

    You have two options:
    Use a SQL Alias and you will then need to swing all databases over to the new SQL Server
    Don't use a SQL Alias and swing all but the Configuration and Administration databases to the new SQL Server, and individually re-configure Service Applications/Web Applications to use the new SQL Server. This will force you to keep the old SQL Server around.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HT201210 My iphone 4s failed to update. What are some reasons why this might happen?

    My IPhone 4S failed to update. Anyone know what are some reasons this might have happened?

    Download and save firmware from here
    iPhone4,1_6.1.3_10B329_Restore.ipsw
    Connect iPhone in iTunes. Option+Restore (Mac) Shift+Restore (PC) pointing to saved .IPSW file.

  • What are the reasons for using absolute paths to embedded objects in word?

    Hello,
    hopefully someone can answer me the question why word always stores the absolute paths to linked objects? We use Word for documentation and these documents are stored in a version control system and sometimes several persons are working on a document. Because
    of the absolute paths stored in the document all users would need to have the same directory structure so that the links would work for every person.
    For linked objects it's not even possible to change the absolute paths to relative paths.
    Additionally I would like to know what the difference between a "Graphic" and "Picture" object is. A graphic can be inserted by selecting "INSERT" -> "Pictures" and a "Graphic" doesn't seem to have a field
    function and always uses absolute paths. "Graphics" can be inserted by selecting "INSERT" -> "Quick Parts" -> "Field..." -> "IncludePicture" and it's possible to use relative paths for "IncludePicture"
    objects and it's possible to show the field function of a "Picture" object.
    Regards
    Martin

    This seems to be by design, not too much information about this. The thread below should be helpful for you to understand it:
    https://social.technet.microsoft.com/Forums/office/en-US/6d4445e1-cdc5-4b3b-9355-9081c963fdd9/unable-to-use-relative-object-links-in-word-office-2010-sp1
    Also, from the thread below, you will find some workarounds for this issue:
    http://windowssecrets.com/forums/showthread.php/102080-Relative-Paths-in-Word-Fields-(All)?p=584769&viewfull=1#post584769
    Aravindhan Battepati

  • What are the reasons for disabling the saving of data in a PDF?

    I seem to have had more than my share of encounters lately with PDF files that have editable fields but have their data saving capability disabled.
    In some of these situations this has been an absolutely maddening inconvenience.
    When I attempt to bring this to the attention of whomever's responsible I get brushed off.
    One person's response was: Actually the majority of the PDF forms I have are Adobe reader and you cannot make changes electronically at all.  The reason for this is to make sure that the documents are not altered in any way.  The <companies creating the PDFs> must make sure that changes are not being made to their forms. 
    I just don't understand that.  How is entering and saving data 'altering' a PDF?
    Is this just bone-headed bureacracy, an urban legend, or is there some fundamental practical matter I am not aware of?

    Saving a filled-in form has always been disallowed with Adobe Reader, formerly known as Acrobat Reader. Though there are a few exceptions...
    History lesson:
    Forms features were first introduced in Acrobat 3. As you might imagine, a number of folks wanted to be able to save filled-in forms using Acrobat Reader. Since this functionality simply was not a feature of Reader, it was not possible. If you wanted to save a filled-in form, you needed to use Acrobat (Exchange).
    Upon recognizing the potential market for a product that they could sell, Adobe developed and released Acrobat Business Tools, which was a version 4 product. It was positioned between Reader and Acrobat, was reasonably priced, and allowed users to save filled-in forms, apply digital signatures, and add comments. Unfortunately, this was marketed poorly and did not achieve commercial success.
    The next iteration was a similar product named Acrobat Approval, which was a version 5 product. It too could save a filled-in form, but was in some ways more limited than Business Tools, and suffered a similar fate. That is, it was not a market success. It was however distributed for free to US taxpayers on the IRS tax products CD-ROM.
    The next idea from Adobe - which was a good one - was to provide for a means of embedding usage rights in a PDF document. These rights would allow Reader to do things it normally would not be able to do, such as saving a filled-in form, adding comments, importing/exporting form data, creating new pages using templates, connecting to databases and web services, etc. At first, the only way to enable these usage rights was with an expensive product from Adobe, so the potential was initially not realized.
    With the release of Acrobat 7, Acrobat users were able to add some usage rights, such as commenting. While this was a welcome addition, folks still wanted to be enable forms to be saved with Reader. Finally with the release of Acrobat 8 Pro, users were able to enable forms to be saved with Reader, but it came with licensing restrictions. In short, if the licensee distributed the form for more than 500 recipients, the licensee could use data from no more that 500 copies of a particular form that was returned to them, including hardcopies. This was great for forms used inside of an orginization, but not so great for forms that needed to be used by the general public. Still, it was a very useful feature for a majority of businesses for internal forms, the vast majority of which have fewer than 500 employees.
    Acrobat 9 or 10 didn't change things. Adobe still wants to capitalize on this market, which certainly is not a bad thing for Adobe and their stockholders. The US IRS forms have long been saveable with Reader because they licence Adobe Reader Extensions, which provides revenue for Adobe.
    Note that some third-party PDF viewers allow users to save filled-in forms whether or not the documents have usage rights. Such software has a different marketing model than does Adobe Reader/Acrobat, and rides the coattails of Adobe by taking advantage of the popularity of PDF forms.

  • What are the steps to remove SMS Provider traces from a server

    Hi,
    My client's environment is set up with a standalone primary site. They decided to install a second SMS Provider on a site system also running the Reprting Services Point to provide redundancy in the case the SMS Provider on the primary site
    would go down.
    They experienced a problem with the server running the second SMS Provider and it went down for about a day. The behavior for SCCM console users was to get an error message preventing them to connect to SCCM; they had to close the console and re-launch it
    so it would randomly connect to the SMS provider on the primary site successfully. When a SMS provider is down, it seems the console won't redirect itself automatcally to another provider when trying to connect.
    Since it was causing some frustration because console users had to launch it several times before they could connect, someone removed the second SMS Provider using the Site Maintenance wizard on the primary site. The thing is the wizard ran while the second
    SMS Provider was down, it removed traces of this SMS Provider from the site configuration, but couldn't remove the actual SMS Provider files and registry entries since the server was down.
    Now, only one SMS Provider is active on the primary site server, but we have orphaned SMS Provider files and registry keys on the site system server. Is there a way to remove them cleanly? The site system is still running the Reporting Services Point, so
    we cannot remove everything related to SCCM.
    Now we prefer to keep a single SMS Provider on the primary site server, since SCCM is not consider critical to the business anyway, and to avoid this issue in the future.
    My guess would be to reinstall the SMS Provider from the Site Maintenance wizard and remove it after, but I just want to have feedback from people who might have deal with it in the past.
    Tnx for help
    Patrick

    Hi,
    Could you install the SMS Provider from the Site Maintenance wizard while SMS Provider files and registry entries are still there? Please have a look on the thread below, although it is for sccm 2007.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/bb307748-7638-404d-a6a4-982827a051c8/how-do-i-remove-sql-provider-that-was-previously-installed-on-a-remote-sql-server?forum=configmgrsetup
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • What are the reasons for following Javascript error in Report Viewer

    Post Author: dhuka
    CA Forum: Crystal Reports
    Hello Everybody!
    I am using Crystal Reports 10 in my web application. But unfortunately I am surrounded with strange problem related to it because of which I have been unable to deploy is on client-side. In my application the error given below is displayed as javascript error in Report Viewer and report is not displayed. But more frustrating part is that I am getting the same error due to different problem with reporting and I am stuck with it as I am unable to figure out what's causing the error now. Earlier this error appeared due to problem with parameter passing to stored procedure which I resolved it and error vanished but once again it has shown up. Moreover this error now appears less frequently and randomly therefore it is even difficult to trace the cause.
    Problem with this Web page might prevent it from being displayed properly or functioning properly. In the future, you can display this message by double-clicking the warning icon displayed in the status bar.
    Line: 40Char: 12Error: Expected ')'Code: 0URL: http://myServer/myApp/myForms/myReports/ReportViewer.aspx
    So can anybody tell me what factors might be causing this errors as the error text is very vague in nature and gives no idea about the actual error.
    Guys, I hope for your kind co-operation.
    Regards,

    Post Author: dhuka
    CA Forum: Crystal Reports
    Thanks for you reply Krishna.
    But this syntax error is the one that is creating problem for me as I cannot trace it. The form ReportViewer.aspx contains only a report viewer object which remains un-binded to any ReportDocument even at runtime.
    At code behind ReportViewer.aspx I have code below that associates SQL Stored Procedure Parameter and Report Filter along with report name. Once all above is associated with ReportDocument, I export ReportDocument to PDF file format and display the report. Here I dont' even bind ReportDocument with my ReportViewer. Moreover, as I mentioned previously this error is encountered randomly (with no reasonable explanation so far) on client PC (while browsing through application).
    I hope below code give you good idea of the way I am implementing my reporting.
    Looking forward to you solution. Please note that I am only passing the ReportFileName and Parameter and Filter Criteria to this form while dataTable by itself using the connection information.
    <<<<<<<<<<<<<<<<<CODE BEHIND of REPORTVIEWER.ASPX>>>>>>>>>>>
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    Dim strKeys() As String
    Dim strReportFilter As String
    Dim strReportName As String
    Dim strError As structError
    Try
    ReDim strKeys(0)
    If strReportName = "" Then
    strReportName = Context.Session("ReportName").ToString()
    If Not Session("ReportParameters") = Nothing Then
    Dim char_Delimiter() As Char = ";".ToCharArray()
    strKeys = Session("ReportParameters").ToString().Split(char_Delimiter)
    End If
    If Not Session("ReportFilter") = Nothing Then
    strReportFilter = Session("ReportFilter").ToString()
    End If
    Else
    Session("DataTable") = Nothing
    End If
    If Not ViewParameterReport(strReportName, strKeys, strReportFilter, strError) Then
    ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
    Exit Sub
    End If
    Catch ex As Exception
    strError.strMsg = Err.Description
    ASPNET_DisplayErrorMessageBox(strError.strMsg, Me)
    Finally
    End Try
    End Sub
    Private Function ViewParameterReport(ByVal str_ReportName As String, ByVal str_ReportParameters() As String, ByVal strReportFilter As String, ByRef strError As structError) As Boolean
    Dim str_ReportPath As String = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
    Dim crLogInfo As TableLogOnInfo
    Dim crConnectionInfo As ConnectionInfo
    Try
    str_ReportPath = CStr(ConfigurationSettings.AppSettings.Get("ReportPath"))
    o_Rpt = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    o_Rpt.Load(str_ReportPath & "\rpts\" & str_ReportName)
    If Context.Session("DataTable") = "" Then
    crLogInfo = New TableLogOnInfo()
    crConnectionInfo = New ConnectionInfo()
    crLogInfo = o_Rpt.Database.Tables(0).LogOnInfo
    crConnectionInfo = o_Rpt.Database.Tables(0).LogOnInfo.ConnectionInfo
    clsDbCnn.SetDBProperties()
    crConnectionInfo.ServerName = clsDbCnn.Server
    crConnectionInfo.DatabaseName = clsDbCnn.Database
    crConnectionInfo.UserID = clsDbCnn.UserID
    crConnectionInfo.Password = clsDbCnn.Password
    crLogInfo.ConnectionInfo = crConnectionInfo
    o_Rpt.Database.Tables(0).ApplyLogOnInfo(crLogInfo)
    Else
    ds_MISReports = New DataSet()
    ds_MISReports = CType(Session("DataTable"), DataSet)
    o_Rpt.SetDataSource(ds_MISReports)
    End If
    If Not IsPostBack Then
    Dim param_Fields As CrystalDecisions.Shared.ParameterFields = New ParameterFields()
    Dim iCount As Integer
    If str_ReportParameters.GetUpperBound(0) <> 0 Then
    For iCount = 0 To str_ReportParameters.Length - 1 Step 2
    o_Rpt.SetParameterValue(CStr(str_ReportParameters(iCount).ToString()), CStr(str_ReportParameters(iCount + 1).ToString()))
    Next
    o_Rpt.RecordSelectionFormula = strReportFilter
    End If
    End If
    'crViewer.DisplayGroupTree = False
    'crViewer.ReportSource = o_Rpt
    SetDBLogonForReport(crConnectionInfo, o_Rpt)
    Dim TargetFileName As String
    Dim fs As System.IO.FileStream
    Dim FileSize As Long
    Dim GenDS As DataSet
    'Dim oRD As New ReportDocument()
    Dim crReportObject As CrystalDecisions.CrystalReports.Engine.ReportObject()
    Dim oExO As ExportOptions
    Dim oExDo As New DiskFileDestinationOptions()
    'Build Target Filename
    TargetFileName = str_ReportPath & "\Pdfs\" & Session.SessionID & ".pdf"
    'Export to PDF
    oExDo.DiskFileName = TargetFileName
    oExO = o_Rpt.ExportOptions
    oExO.ExportDestinationType = ExportDestinationType.DiskFile
    oExO.ExportFormatType = ExportFormatType.PortableDocFormat
    oExO.DestinationOptions = oExDo
    o_Rpt.Export()
    o_Rpt.Close()
    'Send the file to the user that made the request
    Response.Clear()
    Response.Buffer = True
    Response.AddHeader("Content-Type", "application/pdf")
    Response.AddHeader("Content-Disposition", "attachment;filename=MyReport.pdf;")
    fs = New System.IO.FileStream(TargetFileName, IO.FileMode.Open)
    FileSize = fs.Length
    Dim bBuffer(CInt(FileSize)) As Byte
    fs.Read(bBuffer, 0, CInt(FileSize))
    fs.Close()
    Response.BinaryWrite(bBuffer)
    Response.Flush()
    Response.Close()
    o_Rpt = Nothing
    Return True
    Catch ex As Exception
    strError.strMsg = Err.Description
    Return False
    Finally
    crConnectionInfo = Nothing
    crLogInfo = Nothing
    End Try
    End Function
    Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, _
    ByVal myReportDocument As ReportDocument)
    Dim myTables As Tables = myReportDocument.Database.Tables
    Dim count As Integer
    For count = 0 To myTables.Count - 1
    Dim myTableLogonInfo As TableLogOnInfo = myTables(count).LogOnInfo
    myTableLogonInfo.ConnectionInfo = myConnectionInfo
    myTables(count).ApplyLogOnInfo(myTableLogonInfo)
    myTables(count).Location = myConnectionInfo.DatabaseName & ".dbo." & myTables(count).Location.Substring(myTables(count).Location.LastIndexOf(".") + 1)
    myTables(count).LogOnInfo.ConnectionInfo.ServerName = myConnectionInfo.ServerName()
    Next
    End Sub

  • What are some reasons why my screen might be shutting off on its own?

    my laptop runs great and is 4 years old. its battery lasts 2.5 hours+ when fully charged, but as of 1 week ago its been experiencing screen problems. it seems this error could be fixed one of two ways, either by closing the laptop and allowing it to restart and also by turning the contrast all the way down and then increasing the brightness only slightly. tech support at best buy (where i have insurance on my ipad) told me it seems there might be a loose hinge and/or the screen's led light might be giving out, and that such a repair would require a screen replacement that would run me $500-$600 since my macbook is an older model. i need your  help!

    I would recommend against using Best Buy for support. Frankly they are clueless most of the time.
    Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

  • SparkCheckBoxDataGrid: What are the reasons it might stay stuck in the corner?

    This has to do with Alex Harui's "SparkCheckBoxDataGrid"
    I've changed the example I'm studying to a WindowedApplication.
    If I enter x,y values to move it away from the edge, it doesn't take.
    If I try dragging, it snaps back to the corner. Also, there's a dashed red line that appears temporarily.
    Is it itemrenderers causing this?
    Also, I was hoping I could move the checkbox into an in-line(?) borderContainer in order to (hopefully) center it, however, the nested tags becomes an issue that I don't understand how to deal with.
    Thanks
    Kristin

    Hi
    Well, yes, the datagrid was stuck in the upper left corner, which was annoying to me.
    I changed it to WindowedApplication so I could test loading my own sqlite data. I deleted everything out of your code related to dragging items as well. Too much confusion there.
    My substitutions work just fine, just can't relocate the grid. I have begun to think the file is corrupt now.
    I have another simple question. Can you please expain this line to me:     owner.addEventListener("selectionChange", selectionChangeHandler);
    I think 'owner' refers back to the datagrid. The datagrid is the owner of the itemRenderer (?). But I don't understand the use of the custom event. I've never seen that structure (an unofficial Flex event)  and I can't follow it back to it's origin in your code to understand it's workings.
    Thanks
    Kristin

  • My domain add WWW will redirect to DNS server's Domain, IE works ok,What's the reason

    I have a website, and I had added both @ and WWW A record on host. I set the domain as the home page, They all work ok in IE, WWW failed work in Firefox. What are the reasons?
    //My domian is http://www.hey-deals.com, hey-deals.com works fine, but http://www.hey-deals.com cannot work in Firefox! It redirect to DNS server's domain, how to set?
    Thanks!

    I have Windows capability but have never used it.  I can't imagine anyone using anything other than Pages for Word Processing, etc.  I use Safari and Firefox for Browsing.  I use Safari primarily and Firefox occassionally.  I have not used Internet Explorer for years and years.  In fact, I was sort of surprised when I learned that some people do still use Internet Explorer. 
    I wasn't sure whether or not there was an Ultra-Safe way to go about checking to discover whether or not Apple Users had to worry about a problem with this particular bug.  
    Although there IS a link provided in the Denver Post's on-line version of this particular news article, I hated to click on a strange link - even if it was provided by the local newspaper.  It is just as easy for the local newspaper to be fooled by bogus links as it is for anyone else to be fooled. 
    My understanding from friends is that there are a whole lot of local newspapers - all across the country - who are currently running this news article - or an article very similar to it. 
    So it would seem to me that a whole lot of Apple users all across the country might suddenly be wondering whether or not they have anything to worry about - and whether or not there was an Ultra-Safe way for Apple users to check all of this out. 
    I contacted my service provider about this issue but, so far, have not heard anything back from them.
    Thanks for the response.
    Sincerely,
    Hannah

Maybe you are looking for