What are the recommended optimum import settings for pictures into FCP

I'm using FCS 7.0 and about to start a project / slideshow with about 700-900 pictures. The images are currently slides but will be converted into digital images. What would be the recommended settings / format to have the pictures converted into digital images for Final Cut? Also, any advice on the sequence / timeline settings as well would be appreciated.
Thanks!

Look at this first...it's designed for stills...and when you're done you can export it for use in FCP
http://www.boinx.com/fotomagico/overview/

Similar Messages

What are the best imovie, mpeg4 settings for making dvds?

What are the best imovie, mpeg4 settings for making dvds?

• iMovie'08 to 11
- Share to Media Browser - AND as Large (or Medium) - HD or other resolutions degrades the final result
iMovie'08 to 11 are not the tools of choise if quality is important as they all degrade the picture by discarding every second line when going from, Event's to Project's and this can not be mended.
iMovie HD6 and FinalCut delivers 100% of what any DVD-Authoring program needs.
• DVD is as standard MAX - intrelaced SD-Video - and can not be any better than this
• iDVD does only care about TIME / Duration as
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
• iDVD Does Region = Zero (to be played everywhere)
• Frame rate - DVD can be in two types PAL (25fps) and NTSC (29.97fps)
If Your material is 30fps then keep to NTSC (29.97fps), if 25fps keep to PAL.
One can feed iDVD the other frame rate - BUT RESULTING DVD WILL BE BAD
I use JES_Deinterlacer (free on Internet) to convert all material to the same and final frame rate
• NTSC - US etc
• PAL - EU etc
Yours Bengt W

What are the best Color "Display Settings" for both my Macbook Pro Retina and Thunderbolt Display??

I have recently purchased a Thunderbolt Display for my MBPr (early 2013) and was wondering what were the best settings for both to obtain an equal color and graphic appearance. I want to have them identical for working on graphics and illustrations.
Thanks

I have the same laptop. There's nothing you really need to do to optimise the system. Perhaps just install the cuda drivers.
It runs premiere like a dream.

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

What are the recommended specs for Spiceworks Network Monitor

What are the recommended disk size and memory for Network Monitor?
This topic first appeared in the Spiceworks Community

Thanks for the response Ralph but I am looking for a more personal experience someone may have managing 200+ Macs via the OS X server and what their specs are.

What is the best iTunes Equalizer settings for Bose QC15 Headphones?

What is the best iTunes Equalizer settings for the Bose QC15 Headphones? An image of those settings would be great.

I'm a bit of an audio geek, so I can tell you that YES whatever sounds right is what you want, but NO those settings are not very good. The general setting is "OK" but the values are extremely out of range. Take that setting and reduce the distance between the sliders and you're getting there. Look for example at how the other iTunes presets are made, the don't go that far from the horizontal middle, and for good reason.
When you play a recorded song, the song has usually been put through an extensive process of mixing, EQ and mastering before you got it, in order to get the best balance of all frequencies, to ensure the best sound accross a wide range of speakers and headphones, and to ensure the most important details and instruments are audible when played together.
All speakers are different, and that's where the idea of an EQ for the listener is introduced. The idea is to tweak the overall sound from your music player (iTunes) to compensate for the strengths and weaknesses of your speakers. Which to be honest, is a bit much to expect form a typical music consumer.
The iTunes EQ has a set of horizontal lines representing 3dB (volume steps) each. In my experience you should not boost or cut more than 6 db at the most - and that's a lot! I stay at around 0-4dB. The extreme options are there to cut noise from bad recordings or emphasize a detail you can't hear very well.
So here's basic EQ lesson:
The EQ represents the range frequencies in sound that the human ear can hear. Actually they go beyond that - most people cannot hear the far left and right frequencies. The range of frequencis start at "deep" or "low" frequencies at the left (bass) passing through the Midrange (midtones) in the center, to the (treble) at the right.
Your speaker has a limit to how many frequencies it can play at once before it starts to lose detail - meaning one sound will drown out in order to make room for another. So don't over-EQ your sound or it'll ruin it.
How to tweak an EQ:
1) Start by playing a well-produced piece of modern music - it'll most likely be well mixed and employ a wide range of frequencies. I'm into heavy metal but for this I'd probably go with some average pop music, because metal is so noisy it gets hard to pick out the details.
2) Set you EQ to FLAT - zero all accross the board. It'll sound pretty flat and boring unless your speakers are very "flavoured" or "colored" already.
Sliding any of the EQ bar up, will increase or boost the volume of the frequency the bar represents. You can't really add frequencies that aren't there already - you're just adding noise in that freqeuncy and that will "fill up" the available frequencies on your speaker, causing that "drowned out" effect I was talking about.
Instead, slide them down from the center, and you're cutting the volume instead. This is better because it'll leave more "room" for the other frequencies. You can always use the Preamp slider at the end if you're worried about loudness (but I wouldn't).
3) Start by tweaking the 500 and 1K slider. This represents the middle of your ears' range of hearing and the most noticable change. It should most likely go downwards - this will take the "canned" sound out of your music and that'll be apparent quickly. Go ahead and slide that down as far as -6dB.
4) Now work outwards from the center forming a "v" shape, where the top tips of the V end at the 64 slider and the 8k slider. The very far left and right sliders (32 and 16K) should dip down again to about 0bB. Trust me, these are almost non-important in most music. You can tweak thos last if you feel it's needed.
5) now it's time to start playing round with the V shape. Go ahead and try sliding the sliders a little up or down between 125-250 and 1K to 4K. You may find that some need to move a lot out of the average "V" shape before the sound is good. This is what my iTunes EQ settings ended up looking like for my Motörheadphones "Motorizer" headphones:
Hope it helps.

What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?

What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?
I read an article and cannot find it that said something about trying to make it 2million pixels and JPG to keep it small, but what exactly should the dimensions be that I ultimately import? Is there some kind of a "density" setting I have to use, as well, when exporting from Photoshop, for example?

See Optimizing performance in your iBooks Author books
Density is discussed by Apple in this context as 'dpi'...
132 - iPad 2
264 - new iPad
At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
Good luck.
Ken

What are the third party tools available for Encryption in Oracle database?

Dear All,
Can you please help me with the below question?
What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
1. Operating system
2. Database edition and version
3. What type of data needs to be secured
4. What level of security is required

What's the best iTunes import setting for highest quality and universality?

What's the best iTunes import setting for highest quality and universality?

Highest quality?
Apple Lossless. (But the files are way big)
Universality?
MP3 (choose the bit rate you think sounds best and doesn't take too much space)

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

What are the optimal hardware specification requirements for Adobe Photoshop CS6?

Greetings to the staff and users of this forum,
As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
If any user here could provide me with proper higher specs, I would really be grateful.
Thanks,
phdwengr

This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

What are the Corresponding fields in CRM for sales order in ECC

HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
Mayank

Mayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com

What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly

Hi all,
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
Help will be surely rewarded.
Thanks and Regards,
Creasy

> What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
> Help will be surely rewarded.
&********************** Please read "the rules" if found usefull... ************************&
Cheers,
Julius

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the best books to purchase for pl/sql programming?

What are the best books to purchase for pl/sql programming?
I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
Thanks

In my opinion one of the best to start
Oracle PL/SQL Programming, Third Edition
Steven Feuerstein

What are the recommended optimum import settings for pictures into FCP

Similar Messages

Maybe you are looking for