What are the required permissions for Portal?

Assuming it's not top secret info, can anyone provide a link to, or list the permission requirements of OID with regard to running Portal? We are having serious headaches with permissions and would like some reference to the exact requirements.
Thanks!
-Sean

known_hosts should belong to your and your group
and the read write permission by default are 644

Similar Messages

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

What are the requirement need for installing of PI7.1

Hello All,
What are the Hardware and Software requirements required for Installing PI 7.1. Installation of PI 7.1. need 64 bit operating system or can I install 32 bit operating system.
Can anybody send me the installation document on PI 7.1.
Thanks & Regards,
Venkat K

Hi,
yes only 64 bit is supported read page no 15 of below link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40328fc8-4844-2b10-b7a2-8930c16df2ba
Installation guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00004f25-6190-2b10-2c8b-fa419234c28b
Re: SAP PI 7.1 minimal hardware
chirag

What are the correct permissions for the Home folder?

Since buying my first mac (G4 iMac) I've since bought 2 other macs & transferred my home folder from the older computer each time. Since then I've messed around with the permissions of the Home folder a few times to try share files & folders between my Windows PCs. So the permissions of the Home folder on all computers could be messed up a little.
I want to set up permissions how they should be set up as default.
I created another user account with admin priveliges & it looks like the Home folder should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: Read only
Others: Read only
And the sub folders (Documents, Pictures etc.) should be set up as follows:
Owner: 'my name'
Access: Read & Write
Group: admin or 'my name'
Access: No access
Others: No accesss
Is this correct, & if so shall I just set permissions on my Home folder exactly the same as the new account I set up?
Or is there some way of resetting permissions for the Home folder?
(I know repairing permissions with Disk Utility doesn't do this).
Power Mac G5 Dual 2.3, 2.5 GB RAM, 20 Cinema Display | MacBook Pro 2.0 15" Mac OS X (10.4.6)

Mac OS X does not have a built-in way of doing this, but you can make one yourself. Open the Script Editor in the /Applications/AppleScript/ folder and enter the following:
do shell script "chmod 755 ~"
try
do shell script "chmod 700 ~/Desktop"
end try
try
do shell script "chmod 700 ~/Documents"
end try
try
do shell script "chmod 700 ~/Library"
end try
try
do shell script "chmod 700 ~/Music"
end try
try
do shell script "chmod 700 ~/Pictures"
end try
try
do shell script "chmod 755 ~/Public"
end try
try
do shell script "chmod 755 ~/Sites"
end try
This script can be saved as an application, which makes it possible to fix the permissions on a home folder with two clicks. The try statements are included so that the script will run if a folder doesn't exist. If the ~ object is a symbolic link, the permissions on it may not be changed; you can use the code block
tell application "Finder"
set the_home to POSIX path of (home as alias)
end tell
do shell script ("chmod 755 " & the_home)
in this case. The rest of the script works as before.
(12450)

What are the default permissions for "self-signed" applets?

Hello!
I have a self-signed applet (=signed with a self made certificate) and under most plugin-enviroments java asks the user if it accepts this certificate as trustworth.
On my linux-box I do not have any problems to write files to the local filesystem after I accepted this self-signed applet.
However I've often read that users must grant some permissions even for signed applets, so is there a list of permissions that are denied by default?
Are there differences between java releases starting with 1.2.2?
Thanks in advance, lg Clemens

Default settings are like you said, jre asks the user and everything will work.
Unless.your applet uses classes that are not signed like with calls from javascript to your applet the plugin.jar is used and you'll get an exception when writing to files.
When writing to files the OS might not allowe the user to write to a certain file or folder.
Don't know what type of exception will be thrown if the OS doesn't allowe it but it has
nothing to do with applet permissions.
To change the default setting you can add the following line in the grant { bit of the
java.policy
permission java.lang.RuntimePermission "usePolicy";
When this line is there all signatures will be ignored and an applet can only do extra
things (like access to local files) if a policy is set up for this applet.
To find out what's wrong at your clients site you should ask them to send a full trace
and check that. I hope you did a .printStacktrace() on the exception in your code so
you can see if any other classes are involved when the exception is thrown.
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory)

What are the needed tools for JDBC???

iam new to this field, i want to know what are the required tools for JDBC??
i know that i need java.sql and javax.sql packages, but how can i get them???
what about the drivers???
thnx in advance

You need to go to the vendor's web site such as Oracle and download the jar file for that particular database. Example: ojdbc14.jar for an oracle database and copy it to the 'lib' folder of your project and then include it with your project. Within that jar file, you will have datasource, preparedStatement, resultSet objects. You will need to read up on how to instansiate the datasource for that database from the vendor's documentation.

What are the requirements for Dreamweaver?

What are the requirements for Dreamweaver? The link is broken

http://www.adobe.com/products/dreamweaver/tech-specs.html
Works for me...
Mylenium

What are the requirements for publishing an App for private distribution, not sale.

I need to create an App in English and 4 other languages for private distribution to individuals. What are the requirements for doing this please? I currently have a just a Single Edition license. Am I right in understanding I need a Cloud subscription and an Apple Developer subscription also?

My client desire is to only make their accessible to paying members requiring a sign–in before download. Does this fall into a private distribution deployment.

What are the pre requisites for E-Recruitment module?

Hi all,
What are the pre requisites for implementing E-Recruitment module ?
Does it require Hr module or as stand alone it can work?
Regards.
Rajendra

Thanks Aniket
Will the following configuration work as e-recruitment stand alone mode.
WAS with ABAP stack + E-Recruting 6.0 sp + Java stack + Portal + ESS MSS Business package ( for e recruiting).
Regards
Rajendra

What are the User Exits for Sales Order creation process?

Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
Mindaugas

Please check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar

What are the input parameters for Function Module

Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.

Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan.

What are the required things to do the debug?

hi Experts,
What are the required things to do the debug?
thanks in advance
sekhar

Hi,
There are different ways to go in debugging mode.
One way is to go to the transaction and put /h + enter in the top blank space.
The other way is to but a breakpoint in your program.After you execute the program,it will stop at the breakpoint and go into debugging mode.
The thirdway is to write break-point in the code at a specific point.On execution it will stop at that point.
A fourth way is to write break (your user id).It will stop only for you and then you can debug it.
Hope it was useful.
Thanks,
Sandeep.

What are the required depreciation areas to post IFRS

Hi,
what are the required depreciation areas to post IFRS
Thanks And Regards.
Ramakrishna.K

Hi,
You should use the local rules for depreciation area 01 = local book and
set up your group rules in another depreciation area such as 30 where you can use different GAAP.
Regards
Sunil
Assign Points, if Useful

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

How to check what are the enhancement done for MIRO transaction

Hi Experts,
Please help me out, how to check what are the enhancement done for MIRO transaction.
Thanks in advance.
Thanks,
Basanagouda

Hi
Use the BADI
Please refer these documents: [Enhancements required in MIGO|Enhancements required in MIGO; and
[Enhancement in MIGO for Goods Movement|Enhancement in MIGO for Goods Movement;
Hope this helps!!
Regards
Vijay

What are the required permissions for Portal?

Similar Messages

Maybe you are looking for