What are the required/recommended Antivirus exceptions for BPC ????

I need to provide and implement a definitive list of required Antivirus exceptions for BPC (both Web and SQL servers).  We currently run v5.1 but I would also like to know if anything is different for v7, although I don't see why it would be.
However, I only seem to have vague references to exception lists (e.g. BPC Log Files or SQL database files)
So I find myself wondering what the rest of the BPC community do in this resepct ???
If you could let me know what exceptions are generally made (or even better, if you have an actual list of recommended exceptions), I would be extremely grateful.
Thanks
Craig

Do not real-time scan SAP BPC server program directories.
  Do not real-time scan SQL Server and Analysis Services server
program directories.
  Do not real-time scan the SQL Server and Analysis Services data
directories.
  Do not real-time scan log files, temp folders and backup
directories.
  Monitoring of network traffic should be specific to file type where
possible
  Ensure the SAP BPC XLA and DLL files are not scanned real-time
(these files are located in the BPC program files directory)
  The OutlookSoft folder within the My Documents folder that stores
application and personal files can be scanned but is likely to
impact the performance of dimension downloads and the retrieval
of documents from these directories (wizards, process selector
menus, etc).
Regards
Sorin Radulescu

Similar Messages

  • What are the required settings for Quality Certificate

    Hi Team
    What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording  for inspection lot.
    Please sugget me T-Code to view this.
    Can I see say for 6-9 months RR done insp. lot.
    Thanks

    Settings for Quality Certificate for Raw material from vendor,
    Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
    There are 2 cases,
    u want details of certificate send by vendor
    u want to record results and see inspection lot wise results.
    case1
    depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
    all these certificates can be dispalyed in QC55 T_CODE.
    CASE2
    U can record results and see in inspection report tab in QA33
    Edited by: YOGINI B THORAT on Aug 4, 2009

  • What are the requirements for Dreamweaver?

    What are the requirements for Dreamweaver? The link is broken

    http://www.adobe.com/products/dreamweaver/tech-specs.html
    Works for me...
    Mylenium

  • What are the browser recommendations for best viewing iWeb 08 site on a PC?

    What are the browser recommendations for best viewing iWeb sites on a PC? Can't find any info on Apple iWeb site.

    Hi,
    I don't think there are recommendations from Apple.
    What I can say is that the newest version of InternetExplorer at the UniversityCampus is working great with my website I didn't find any problem (Menus, Slideshows, text displaying, pictures everything worked great). There are IE problems reported in other threads but I think they refer to older IE versions (seems like most IE users still have older versions on their PCs).
    Newest Firefox will work too.
    Reagrds,
    Cédric

  • What are the requirements for publishing an App for private distribution, not sale.

    I need to create an App in English and 4 other languages for private distribution to individuals. What are the requirements for doing this please? I currently have a just a Single Edition license. Am I right in understanding I need a Cloud subscription and an Apple Developer subscription also?

    My client desire is to only make their accessible to paying members requiring a sign–in before download. Does this fall into a private distribution deployment.

  • Which are the highly recommended JMS brokers for live deployment?

    Which are most widely deployed JMS messaging servers (brokers) in live applications?
    Which are the most recommended JMS servers for a new deployment?
    Any tips on these will be very helpful.

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I have my dev server - I leave this on 512MB and that's fine for
    most of the stuff I do. We generally up this to a gig on our live
    servers (which only run 3-4 small sites), and historically we've not
    gone above this on our Shared servers (which host anywhere up to 400
    sites) because of the 32-bit limit.
    However, now we're running CF9 on 64-bit Server 2008, we've obviously got a lot more RAM available. The obvious choice is to ramp it up high, but I've also been heard that causes issues of its own - the Java GC then has far more work to do when it's called and as the memory fills it's harder to get a contiguous block of RAM, so performance can suffer.
    Leave the memory setting at the default value, until testing requires you to do otherwise, or your sites unravel some unforeseen memory demand. It's a risk our SysAdmin colleagues are prepared to take. With the coming of 64-bit, they've been on the alert, and have always cattle-prodded us whenever we've been tempted to push the button to go higher.
    Our defaults almost coincide with yours: 512 MB for 32-bit and just over 1GB for 64-bit. So what you yourself have just said is my own basic wisdom on the subject, too: if it aint broke, don't try to fix it.
    [postscript: I work full-time at one company, part-time at another. By pure coincidence, both use the same JVM memory settings.]

  • What are the Corresponding fields in CRM for sales order in ECC

    HI! Experts,
    While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
    VBKD-BSARK - Purchase order type
    VBAK-BNAME - Name: user ordered
    VBKD-IHREZ - Web Confirmation Number
    VBAK-TELF1 - Telephone number
    Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
    Thanks and Regards
    Mayank

    Mayank,
    May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
    Check the following fields in CRM and see if you find the data you require.
    VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
    VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
    VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
    VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship  "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
    Hint: Once you have the R/3 order in CRM, try using the Report program (SE38)  CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
    Easwar Ram
    http://www.parxlns.com

  • What are the third party tools available for Encryption in Oracle database?

    Dear All,
    Can you please help me with the below question?
    What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

    Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
    http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
    But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
    1. Operating system
    2. Database edition and version
    3. What type of data needs to be secured
    4. What level of security is required

  • What are the allowable dimensions of screenshots for ibooks?

    What are the allowable dimensions of screenshots for ibookes?  I know the requirement is very specific.
    And what is the best tool to do so?  I tried to use the native screenshot tool but it is hard to make the size precise.

    Minimum size is 600 pixels in the shorter dimension. Maximum size is 2048 pixels in the longer dimension. That's what you get when you take a screenshot on a new iPad. (There is no point in having something larger than this.) Screenshots taken with an older iPad are 1024x768.
    For my book, I just took screenshots on an iPad 2 (1024x768) and used those. They were accepted without complaint.
    Michi.

  • What are the required things to do the debug?

    hi Experts,
    What are the required things to do the debug?
    thanks in advance
    sekhar

    Hi,
    There are different ways to go in debugging mode.
    One way is to go to the transaction and put /h + enter in the top blank space.
    The other way is to but a breakpoint in your program.After you execute the program,it will stop at the breakpoint and go into debugging mode.
    The thirdway is to write break-point in the code at a specific point.On execution it will stop at that point.
    A fourth way is to write break (your user id).It will stop only for you and then you can debug it.
    Hope it was useful.
    Thanks,
    Sandeep.

  • What are the required depreciation areas to post IFRS

    Hi,
    what are the required depreciation areas to post IFRS
    Thanks And Regards.
    Ramakrishna.K

    Hi,
    You should use the local rules for depreciation area 01 = local book and
    set up your group rules in another depreciation area such as 30 where you can use different GAAP.
    Regards
    Sunil
    Assign Points, if Useful

  • How to start adobe photoshop cs6? what are the requirements to me as a begginer? please help

    what are the requirements for adobe photoshop cs6? I am a beginner doing self study... please help

    HI balaram reddy 
    You can use the administration guide under the below link.....
    service.sap.com/instguidesu2192 mySAP Business Suite Solutions u2192 mySAP SRM u2192 Using SAP SRM Server 5.5 u2192Solution Operations Guide: mySAP Supplier Relationship Management
    Please find the links as requested. You will find lot of documents and so on here.
    http://service.sap.com/srm
    http://help.sap.com/saphelp_srm50/helpdata/en/0e/cede3b6bc8682be10000000a11402f/frameset.htm
    Regards
    Bandla

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all,
    What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    Help will be surely rewarded.
    Thanks and Regards,
    Creasy

    > What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
    > Help will be surely rewarded.
    &********************** Please read "the rules" if found usefull... ************************&
    Cheers,
    Julius

  • What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

    I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

    I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
    The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
    Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
    Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
    Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
    When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
    Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi,
    I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
    I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
    Dr. Kirco Arsov
    Solved!
    Go to Solution.

    Hi Kirco,
    I have some more information for you :-)
    I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
    As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
    From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
    TB_0_LevelEdgeReg :: Offset 0x660
    TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
    7..6: EdgeMode
    5..0: LESel
    LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
    EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
    TG_0_CombinationReg :: Offset 0x6A0
    TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
    19..16: CombFunction
    5..4: CombTypeB
    1..0: CombTypeA
    CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
    CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
    CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
    All of the other bits should be set to 0b0.
    Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

Maybe you are looking for