What are the results of trashing multi-user prefs?

Hello to all,
I've forgotten my password to my Owner account, and I'm aware that to reset it I have to trash Multi-User prefs whilst booted from a CD. I know that doing this will delete all my accounts and passwords, but will it also delete all the files in these accounts? Also, will it delete all the files in the Owner account?
Original iBook G3 Clamshell   Mac OS 9.2.x   288MB RAM, 20GB HD, 300MHz

Hi, bananaboy -
Since it is a file and not a folder, the Multi-User Prefs file can not contain the files in the individual accounts - if it did, it would be larger than all the other info on the drive combined.
When you trash the file Multi-User Prefs, no other files get trashed - they can not. All that disappears are the passwords and other account settings that are stored in the Multi-User Prefs file.

Similar Messages

  • Please explain what are the various procedures to find user-eixts

    Hi,
    Please explain what are the various procedures to find user-eixts ?
    Ramana

    Hi,
    1. By executing this Program.
    *& Report  ZFIND_EXIT
    REPORT  ZFIND_EXIT.
    *report zbadi_find .
    tables : tstc,
    tadir,
    modsapt,
    modact,
    trdir,
    tfdir,
    enlfdir,
    sxs_attrt ,
    tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode,
    p_pgmna like tstc-pgmna .
    data wa_tadir type tadir.
    start-of-selection.
    if not p_tcode is initial.
    select single * from tstc where tcode eq p_tcode.
    elseif not p_pgmna is initial.
    tstc-pgmna = p_pgmna.
    endif.
    if sy-subrc eq 0.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'PROG'
    and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
    select single * from trdir
    where name = tstc-pgmna.
    if trdir-subc eq 'F'.
    select single * from tfdir
    where pname = tstc-pgmna.
    select single * from enlfdir
    where funcname = tfdir-funcname.
    select single * from tadir
    where pgmid = 'R3TR'
    and object = 'FUGR'
    and obj_name eq enlfdir-area.
    move : tadir-devclass to v_devclass.
    endif.
    endif.
    select * from tadir into table jtab
    where pgmid = 'R3TR'
    and object in ('SMOD', 'SXSD')
    and devclass = v_devclass.
    select single * from tstct
    where sprsl eq sy-langu
    and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
    write:/(105) sy-uline.
    format color col_heading intensified on.
    Sorting the internal Table
    sort jtab by object.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type c.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    loop at jtab into wa_tadir.
    at first.
    format color col_heading intensified on.
    write:/1 sy-vline,
    2 'Enhancement/ Business Add-in',
    41 sy-vline ,
    42 'Description',
    105 sy-vline.
    write:/(105) sy-uline.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    format color col_group intensified on.
    write:/1 sy-vline,
    2 wf_object2,
    105 sy-vline.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    select single modtext into wf_txt
    from modsapt
    where sprsl = sy-langu
    and name = wa_tadir-obj_name.
    format color col_normal intensified off.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single text into wf_txt
    from sxs_attrt
    where sprsl = sy-langu
    and exit_name = wa_tadir-obj_name.
    format color col_normal intensified on.
    endcase.
    write:/1 sy-vline,
    2 wa_tadir-obj_name hotspot on,
    41 sy-vline ,
    42 wf_txt,
    105 sy-vline.
    at end of object.
    write : /(105) sy-uline.
    endat.
    endloop.
    write:/(105) sy-uline.
    skip.
    format color col_total intensified on.
    write:/ 'No.of Exits:' , wf_smod.
    write:/ 'No.of BADis:' , wf_badi.
    else.
    format color col_negative intensified on.
    write:/(105) 'No userexits or BADis exist'.
    endif.
    else.
    format color col_negative intensified on.
    write:/(105) 'Transaction does not exist'.
    endif.
    at line-selection.
    data : wf_object type tadir-object.
    clear wf_object.
    get cursor field field1.
    check field1(8) eq 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    set parameter id 'MON' field sy-lisel+1(10).
    call transaction 'SMOD' and skip first screen.
    when 'SXSD'.
    set parameter id 'EXN' field sy-lisel+1(20).
    call transaction 'SE18' and skip first screen.
    endcase.
    2. . Go to the screen>System>Status-->Program (Double
    click this program. It will take you to the program.
    2. Now, Goto-->Object Directory Entry.
    3. Make a note the package name.
    4. Now run the transactions SMOD, press F4 and enter the
    above noted package, press enter.
    5. It will display list of Exits.
    6. Now go back to the initial screen SMOD.
    7. Specify the exit name here and select the radio button
    Components.
    8. It will display four group boxes one for FM, second
    for Fcodes, thrid for Screen areas and last for
    includes.
    9. Goto transaction CMOD, create a new project, and
    click the button "Enhancement assignments" and
    specify your enhancements that you got in SMOD.
    10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
    3. 1. in se11, goto table MODSAP
    View table contents
    in Type field, enter
    'E' (for user exit / Function Exit)
    OR 'S' (for screen exit)
    4. Calling Customer- fucntion in Main Program
    Thanks,
    Anitha

  • What are the ways to check multi org is enabled?

    Hi,
    Can anyone tell me what are the methods to check whether multi org is enabled?
    -Senthil

    Hi,
    does multi-org mean multiple inventory organizations? or multiple hr organizations or multiple financials organizations?
    In our implementation we have single set of responsibilities in financials modules but multiple inventory organizations. They are using one set of responsibilities to purchase materials for multiple inventory organizations.
    In other implementation I worked on they are using few PO responsibilities to purchase materials for many inventory organizations?
    What is the relationship? how to map it?
    Thanks,

  • What are the network issues with single user versus mulit-user version?

    I am having trouble attempting to share Pages documents over a network. My documents are created and saved in Pages on Mac 1. The same documents are opened, edited and re-saved on Mac 2.
    Upon re-saving any document on Mac 2, (originally created on Mac 1), two error messages will appear. The first message says: "You do not have permissions to save changes in this document".
    Once I have fixed the permissions problem, another message appears. The second message is: "Type: Couldn't save image. Description: thumbs/pagethumb1.tiff".
    The only way to solve this second problem is to save the document with a different name on the station you are currently working on. It looks like the page previews may not be readable from station to station. Not to mention the network permissions not being transferrable from station to station.
    I am wondering if both these problems are related to the fact that I am using a single user version of Pages when I should be using a multi-user version because of the network.
    The Mac OS I am using is a Family version for up to 5 users. The Pages (iWork) version is strictly single user.
    I am currently using Pages version 2.02.
    Mac G4 Dual Mirror and Mac G4 AGP Graphics   Mac OS X (10.4.8)   both systems have lots of RAM; the G4 AGP has a smaller drive

    Forgive my ignorance of UNIX, but will what you are
    suggesting create multiple copies of the same file,
    leading to confusion?
    The way I have set up my system there are copies of all my important files on the other machine, but not multiple copies of each file. Rsync backs-up the changes to existing files or copies new files to the other computer. It can be set to mirror one machine on the other, copy only certain files, not copy certain files, etc.
    Currently I am opening the file over the network,
    making changes and saving them back to the original
    file. When I open up the same file on the sharing
    Mac and attempt to do the same, permissions and save
    problems occur. If I start out on the sharing Mac,
    then open the original file on the networked unit,
    the same permissions and save problems occur. No
    UNIX commands are used.
    I don't know what is causing the problem you are experiencing, but there is way to do what you want. Rsync is one way, there are several other ways to synchronise machines that do not involve you typing out unix commands. Do a search here for synching folders
    But at least I am only working with one file. And I
    have my wife and oldest daughter using the Macs.
    They are even less technically proficient than me.
    How can I use the method you suggest without having
    multiple copies everywhere? And how will I do this
    without scaring my Luddite family?
    the system I use (rsync, .sh file, cron) is automatic. The files are backed up automatically every hour from 8 am until 10 pm. If there are no changes, nothing is backed up.
    my macbook backs up specified files/folders from folder andrew and folder bev to the identical folders on my wife's mac mini.
    the mac mini backs up the same folders to the macbook.
    I use the mackbook 99% of the time, my wife uses the mini 99% of the time. this way all her files are availalble on the macbook and mine are available on the mini.
    Once setup to your liking this is a transparent and unobtrusive system, but there are alternatives.

  • What is the cost for a multi user agreement for CS3

    Purchased CS3 for Mac from eBay, seems I can install it on 2 computers. What is the cost involved if I wanted to add another?

    What is the cost involved if I wanted to add another?
    There is no such thing. Another user simply means another full license. It's irrelevant, though. As Steve already said, CS3 is now 5 versions behind and other than used copies cannot be bought officially from Adobe or their resellers.
    Mylenium

  • What are the speeds of singe/multi core processor for iPhone 6

    i have an iPhone 6 and have just run Geekbench 3 test for the processors and got:
    SIngle Core 1164
    Multi Core    2049
    Geekbench give an average score of:
    Single Core  1607
    Multi Core     2831
    The scores for my phone seem to be quite low in comparison to Geekbench results.
    I this something I should be concerned with?

    No, you don't have to be concerned. Every bench test will give you different results, and In the end it's a phone and not a high-end computer like the Mac Pro to do your video editing.

  • ESW: What are the roles assigned with CRM user in ESW?

    I would like to see the CRM from a Sales role and a marketing role

    Hi,
    you can use the installation Guid for that:
    http://help.sap.com/saphelp_nw04/helpdata/en/25/33533dc1c0b60fe10000000a114084/frameset.htm
    Only thing that is not exactly mentioned there. If you create a special user to use NWA on the J2EE - this user should have J2EE_ADMIN authorisation.
    Rest is described exactly in the Guide Mentioned above.
    Hope this helps to solve the issue.
    Regards,
    Oliver

  • What are the various reasons that result in locking an user login id .....

    what are the various reasons that result in locking an user , for development server?

    Hi,
    Basic reason behind the locking user id is incorrect logons.
    Goto Tcode : S_BCE_68001402 .
    You can find the exact number of incorrect logons and reason.
    regards,
    Raju

  • What are the roles need to add for webservice user in SAP ECC 6.0

    Dear SDNS,
    Can you please help me to understand , what are the roles needed to add while creating a webservice user in ABAP STACK.
    Really appreciate your immediate help and response.
    Thanks and Regards.
    Suraj

    Hi Suraj,
    Please refer to this link & apply the role/s as per the requirements for the web service user:
    [http://help.sap.com/saphelp_nwpi71/helpdata/en/2b/07074155bcf26fe10000000a1550b0/content.htm]
    Best Regards, Trevor

  • What are the user exits available related to Credit Management?

    What are the user exits available related to Credit Management?
    <b>I have blocked users from releasing SO through Tciode VKM3 , now I want to block
    the same (releasing of SO through VKM4) ,I want VKM4 to be used only for releasing delivery orders. Can anyone help me in configuring the same?.</b>
    Thanx in advance,
    Regrds,
    Binayak

    Hi,
    User Exits For Credit Checks And Risk Management
    Credit Check
    If you want to carry out your own individual credit checks, that differ from those in the standard system, you must define them in the following user exits:
    LVKMPTZZ
    LVKMPFZ1: USER_CREDIT_CHECK1
    LVKMPFZ2: USER_CREDIT_CHECK2
    LVKMPFZ3: USER_CREDIT_CHECK3
    User exit for availability check
    User exit USEREXIT_AVAIL_CHECK_CREDIT exists in Include MV45AFZF.
    This user exit allows you to determine whether the system should or should not carry out an availability check after a blocked document has been released or after a new credit check.
    Risk Management for Receivables
    RVKMPUS2
    Using this user exit, you can define new forms of payment guarantee.
    Regards,
    Amrish Purohit

  • What are the different methods to find the user-exit for any requirement?

    Hi Everybody,
    What are the different methods to follow to find the user-exit for any requirement?
    Thanks & Regards,
    Nagaraju Maddi

    The following program search all the user exits involved with a T-code:
    Selection Text: P_TCODE: Transaction Code to Search
    Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
    REPORT z_find_userexit NO STANDARD PAGE HEADING.
    *&  Enter the transaction code that you want to search through in order
    *&  to find which Standard SAP® User Exits exists.
    *& Tables
    TABLES : tstc,     "SAP® Transaction Codes
             tadir,    "Directory of Repository Objects
             modsapt,  "SAP® Enhancements - Short Texts
             modact,   "Modifications
             trdir,    "System table TRDIR
             tfdir,    "Function Module
             enlfdir,  "Additional Attributes for Function Modules
             tstct.    "Transaction Code Texts
    *& Variables
    DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
    DATA : field1(30).
    DATA : v_devclass LIKE tadir-devclass.
    *& Selection Screen Parameters
    SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
    SELECTION-SCREEN SKIP.
    PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN END OF BLOCK a01.
    *& Start of main program
    START-OF-SELECTION.
    * Validate Transaction Code
      SELECT SINGLE * FROM tstc
        WHERE tcode EQ p_tcode.
    * Find Repository Objects for transaction code
      IF sy-subrc EQ 0.
        SELECT SINGLE * FROM tadir
           WHERE pgmid    = 'R3TR'
             AND object   = 'PROG'
             AND obj_name = tstc-pgmna.
        MOVE : tadir-devclass TO v_devclass.
        IF sy-subrc NE 0.
          SELECT SINGLE * FROM trdir
             WHERE name = tstc-pgmna.
          IF trdir-subc EQ 'F'.
            SELECT SINGLE * FROM tfdir
              WHERE pname = tstc-pgmna.
            SELECT SINGLE * FROM enlfdir
              WHERE funcname = tfdir-funcname.
            SELECT SINGLE * FROM tadir
              WHERE pgmid    = 'R3TR'
                AND object   = 'FUGR'
                AND obj_name = enlfdir-area.
            MOVE : tadir-devclass TO v_devclass.
          ENDIF.
        ENDIF.
      * Find SAP® Modifications
        SELECT * FROM tadir
          INTO TABLE jtab
          WHERE pgmid    = 'R3TR'
            AND object   = 'SMOD'
            AND devclass = v_devclass.
        SELECT SINGLE * FROM tstct
          WHERE sprsl EQ sy-langu
            AND tcode EQ p_tcode.
        FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
        WRITE:/(19) 'Transaction Code - ',
        20(20) p_tcode,
        45(50) tstct-ttext.
        SKIP.
        IF NOT jtab[] IS INITIAL.
          WRITE:/(95) sy-uline.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
          WRITE:/(95) sy-uline.
          LOOP AT jtab.
            SELECT SINGLE * FROM modsapt
            WHERE sprsl = sy-langu AND
            name = jtab-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            WRITE:/1 sy-vline,
            2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
          ENDLOOP.
          WRITE:/(95) sy-uline.
          DESCRIBE TABLE jtab.
          SKIP.
          FORMAT COLOR COL_TOTAL INTENSIFIED ON.
          WRITE:/ 'No of Exits:' , sy-tfill.
        ELSE.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
          WRITE:/(95) 'No User Exit exists'.
        ENDIF.
      ELSE.
        FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
        WRITE:/(95) 'Transaction Code Does Not Exist'.
      ENDIF.
    * Take the user to SMOD for the Exit that was selected.
    AT LINE-SELECTION.
      GET CURSOR FIELD field1.
      CHECK field1(4) EQ 'JTAB'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • What are the best practices to migrate VPN users for Inter forest mgration?

    What are the best practices to migrate VPN users for Inter forest mgration?

    It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
    Quest (QMM) has a VPN migration solution/tool.
    ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
    Santhosh Sivarajan | Houston, TX | www.sivarajan.com
    ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
    Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
    Blogs: Blogs
    Twitter: Twitter
    LinkedIn: LinkedIn
    Facebook: Facebook
    Microsoft Virtual Academy:
    Microsoft Virtual Academy
    This posting is provided AS IS with no warranties, and confers no rights.

  • What are the minimum db user privileges required for CDC?

    What are the minimum privileges required for the source data server user in order to to successfully implement CDC
    Currently I'm getting an "Insufficient privileges" error when trying to start a CDC journal on a model. The error is happening on the step that creates a trigger on the table in the source schema.
    Here's the situation:
    The data server uses the user "ODI_TEMP" for its connection. ODI_TEMP has been granted select privileges on the desired tables in the source schema. When starting the CDC journal on the model for the source schema, ODI tries to create a trigger on the source tables. This fails since the ODI_TEMP user can't create triggers on anything outside of it's own schema. For obvious fundamental security reasons, we cannot give the ODI_TEMP user the CREATE ANY TRIGGER system privilege on the data source.
    Journalizing is set up using JKM Oracle Consistent. ODI is 11g, DB is 11g.

    Hi,
    You can go for this
    Grant CREATE ANY TRIGGER system privilege to ODI_TMP
    Start the Journal , it will create triggers in ODI_TMP schema for the tables present in your source schema.
    Now revoke CREATE ANY TRIGGER system privilege from ODI_TMP.
    It will continue to work .. only when you are restarting the journal (due to adding or removing some tables in CDC) , you will be requiring CREATE ANY TRIGGER privilege.
    Thanks,
    Sutirtha

  • I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

    If you have been backing up on Timemachine.
    All you need to do is enter time machine... Then the rest is obvious.
    Find the iTunes folder and hit 'Restor'.
    If not the only way to get all your iTunes music back is to enter iTunes Store.
    On the right hand side you should see 'Purchased'.
    Click 'purchased' and there you have it.

Maybe you are looking for