What are the roles need to add for webservice user in SAP ECC 6.0

Dear SDNS,
Can you please help me to understand , what are the roles needed to add while creating a webservice user in ABAP STACK.
Really appreciate your immediate help and response.
Thanks and Regards.
Suraj

Hi Suraj,
Please refer to this link & apply the role/s as per the requirements for the web service user:
[http://help.sap.com/saphelp_nwpi71/helpdata/en/2b/07074155bcf26fe10000000a1550b0/content.htm]
Best Regards, Trevor

Similar Messages

  • What are the roles required for MSS

    What are the roles required for MSS in R/3.
    I have created ESS roles. But need to find for MSS.
    I am able to see the PERNR in ESS on portal which created in R/3.
    I need to get my staff on portal.
    What config is required for this.
    MSS User.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the authorization need to be given for a Key Users in BW?

    Can you help me out for this question please.
    Thank in advance.
    Kay
    What are the authorization need to be given for a Key Users in BW?

    Hello,
    check this:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
    you can use the template role to dfine your own roles for Key User: S_RS_RREDE     BI Role: Reporting Developer (Development System)
    Hope it help
    regards

  • What are the files needed for downloading the MSS -BusinessPackage

    Dear Gurus,
    Any body can give me a suggestion for downloading the MSS -BusinessPackage ,and also what are the files needed for the deployment -its in a urgent basis and reward points welcome!
    regards,
    S.Rajeshkumar

    Hi Rajesh,
    You have to download and deploy the following through SDM (for NW04s/EP7),
    1. Business Package for MSS (contains roles,worksets for your Business Package)
    2. PCUI_GP (WebDynpro Component)
    3. SAP_MSS (WebDynpro Coponent - your MSS application files)
    To use ESS and MSS in Conjunction, you also have to deploy Business Package for Common Parts.
    Backend SAP systems should have SAP HR and SAP FIN configured.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/29/d7844205625551e10000000a1550b0/frameset.htm</a>
    Thanks,
    Vamshi

  • What are the steps need to be taken care  for MM data sources  while extrac

    what are the steps need to be taken care  for MM data sources  while extracting  from R/3 tables
    and please provide the Steps involved in R/3 side
    thnaks
    Racha

    Hi,
    For Inventory Management, you can have a look at the following link.
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

  • What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

    Hello All,
    What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
    Navigation
    Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
    The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
    Thanks & Regards
    Ayesha

    Thanks Sridar
    If we use Number we cannot separate the cheque numbers with , or -
    We need to enter numbers along with comma and '_' in cheque number field.
    Thanks & Regards
    Ayesha

  • What are the steps  needs to be perform to define a data model

    What are the steps  needs to be perform to define a data model
    a.     Information Gathering 
    b.     Hardware & Software
    c.     Structure the Information – MDM
    d.     Transfer into a Physical Model – BW data model
    e.     Explore use of existing model – Business Content

    Hi Siva,
         Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
    After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.
    <u><b>
    Project Preparation</b></u>
    Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
    <u><b>Blue Print</b></u>
    Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
               By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
    <u><b>Realization Phase</b></u>
      Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
    <u><b>Testing</b></u>
        Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
    <u><b>Go live</b></u>
    Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after  it will be transitoned to support team.
    Hope It helps you.
    Assign Points if it usefull
    Regards
    Sujan

  • What are the Corresponding fields in CRM for sales order in ECC

    HI! Experts,
    While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
    VBKD-BSARK - Purchase order type
    VBAK-BNAME - Name: user ordered
    VBKD-IHREZ - Web Confirmation Number
    VBAK-TELF1 - Telephone number
    Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
    Thanks and Regards
    Mayank

    Mayank,
    May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
    Check the following fields in CRM and see if you find the data you require.
    VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
    VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
    VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
    VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship  "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
    Hint: Once you have the R/3 order in CRM, try using the Report program (SE38)  CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
    Easwar Ram
    http://www.parxlns.com

  • What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

    Hi,
    I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
    I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
    Dr. Kirco Arsov
    Solved!
    Go to Solution.

    Hi Kirco,
    I have some more information for you :-)
    I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
    As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
    From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
    TB_0_LevelEdgeReg :: Offset 0x660
    TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
    7..6: EdgeMode
    5..0: LESel
    LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
    EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
    TG_0_CombinationReg :: Offset 0x6A0
    TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
    19..16: CombFunction
    5..4: CombTypeB
    1..0: CombTypeA
    CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
    CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
    CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
    All of the other bits should be set to 0b0.
    Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
    Joe Friedchicken
    NI VirtualBench Application Software
    Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
    Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
    Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
    Senior Software Engineer :: Multifunction Instruments Applications Group
    Software Engineer :: Measurements RLP Group (until Mar 2014)
    Applications Engineer :: High Speed Product Group (until Sep 2008)

  • What are the ports need to open at firewall

    What are the ports need to open at firewall to access Oracle EBS R12 through internet?

    All these following ports need to open at firewall??
    Database Port : 1521
    RPC Port : 1626
    Web SSL Port : 4443
    ONS Local Port : 6100
    ONS Remote Port : 6200
    ONS Request Port : 6500
    Web Listener Port : 8000
    Active Web Port : 8000
    Forms Port : 9000
    Metrics Server Data Port : 9100
    Metrics Server Request Port : 9200
    JTF Fulfillment Server Port : 9300
    MSCA Server Port : 10200-10205
    MCSA Telnet Server Port : 10200,10202,10204
    MSCA Dispatcher Port : 10800
    Java Object Cache Port : 12345
    OC4J JMS Port Range for Oacore : 23000-23004
    OC4J JMS Port Range for Forms : 23500-23504
    OC4J JMS Port Range for Home : 24000-24004
    OC4J JMS Port Range for Oafm : 24500-24504
    OC4J AJP Port Range for Oacore : 21500-21504
    OC4J AJP Port Range for Forms : 22000-22004
    OC4J AJP Port Range for Home : 22500-22504
    OC4J AJP Port Range for Oafm : 25000-25004
    OC4J RMI Port Range for Oacore : 20000-20004
    OC4J RMI Port Range for Forms : 20500-20504
    OC4J RMI Port Range for Home : 21000-21004
    OC4J RMI Port Range for Oafm : 25500-25504
    DB ONS Local Port : 6300
    DB ONS Remote Port : 6400
    Oracle Connection Manager Port : 1521

  • What are the third party tools available for Encryption in Oracle database?

    Dear All,
    Can you please help me with the below question?
    What are the third party tools available for Encryption in Oracle database? Please let me know if you know their feedback and also licensing/cost information

    Why would you spend money to purchase a third-party tool that will be, almost by definition, less secure than the tools inside the product you already own and paid for?
    http://www.morganslibrary.org/reference/pkgs/dbms_crypto.html
    But were I to have any to recommend one I would not do so without knowing information you seem to consider unimportant such as:
    1. Operating system
    2. Database edition and version
    3. What type of data needs to be secured
    4. What level of security is required

  • What library to I need to add for AbstractRemoteApplicationModuleImpl?

    JDev 9.0.5.2
    what library to I need to add for oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl?
    I am debugging a custom method in my app module. When it steps through a line with a VO.createRow() it complains about not being able to find the class
    oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl
    It I hit the "play" button, none of the remaining code in the method gets executed.
    What library should I add so that this can be resolved?
    Thanks

    ??!if thats in reply to why i posted mine after mlk, it
    was sposed to be
    after paul's, i was just slow....No, "??!" is the vaguest question of all. We have a winner!

  • What are the defaul username and password for SQL Plus ?

    hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1

    You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
    I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
    When you install it, you'll be given several options about the type of database you want.
    But before you install anything, you should read the installation manual for your platform.

  • What are  the roles & responsibilities  of GRC/SECURTIY CONSULTANT IN IMPLE

    HELLO EXPERTS,
                                  CAN U PLS TELL WHAT ARE THE ROLES & RESPONSIBILITIES OF GRC/SECURITY CONSULTANT IN IMPLEMENTATION OF GRC TOOL.
    REGARDS,
    SANJAY

    Hi Sanjay,
    The role of GRC & Securtiy Consultant is basicly the implementation of GRC Application in Customor envoriment. In most of cases he gives technical support for installation and configuration. What we are really do is following..
    1. Preperation of System Landscape Concept --> Provide Hardware and Software spesifications to customer
    2. Installation of Software Components --> This contains the installation of NW and GRC Components and also the installation of SAP Backend Components like Real Time Agents and the post-Installation configurations
    3. Post-Installation and Basic Configuration --> Create Connectors and additional basic configurations
    4. Hosting of Workshops for Risk Creation and Ruleset customizing
    5. Implementation of Custom defined Rules in the Application
    6. Test of Applications
    7. Hostin of Workshops for Approval Methodology and Workflow Use Cases
    8. Hostin of Workshops for Superuser Role Usage and Management of Superuser
    9. Role Change and Creation Workshops in GRC ERM.
    10 Documentation and Deliver of Custom Concepts for Compliant User & Role Administration
    11. Handling of Error and Trobles.
    this are my daily business...
    Best Regards.

  • What are the connections to be done for file-to-RFC scenario in XI & R3 ?

    Hi,
    What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
    I need to know what type connections used for  file-to-RFC in backend .
    In SLD it should be Third Party or  WEB AS ABAP..

    Hi Nandan,
    Perform the following configurations...
    <b>SAP XI</b>
    <b>1) RFC Destination (SM59)</b>
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    <b>2) Create Port (IDX1)</b>
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    <b>SAP R/3</b>
    <b>1) RFC Destination (SM59)</b>
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    <b>2) Create Port (We21)</b>
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    Regards
    San
    Remember to set the thread to solved when you have received a solution there is a Way.

Maybe you are looking for

  • How do I create a new photo album on iPad2 with o.s. 6.1?

    I have an iPad 2 with software version 6.1.  When I try to create a new photo album, no keyboard appears when the "Enter a name for this album" box comes up.  What am I doing wrong? How do I enter the name of the new album? 

  • What to do if an Audio Book did not download correctly?

    I bought and downloaded an audiobook from the iTunes store on my iPhone over wifi. A couple of days later I discovered that the sound stops about 3/4 through. The seconds keep ticking down but there is no sound whatsoever. The cutoff point is the sam

  • User application-id and existing schema: Enhancer doesn't work properly

    I want to use JDO, but I have an existing schema and I need to use my own primary keys. Unfortunately the documentation and examples show only one thing at a time. Either it describes how to use an existing schema or it shows how to use application-c

  • Crashing while working with inventor drawings.

    I have a user who works with Acrobat Standard X, and uses redlining to markup inventor drawings. While working the buttons across the toolbars near the top of the window will sometimes start to disappear(black box appears over them).   When that happ

  • Camera Raw white balance presets

    When I open an image (either RAW or JPEG), I only have 3 option for white balance presets. "As Shot" "Auto" or "Custom". Does anyone know how I can get the other presets?? I am using CS3 w/ Camera Raw 4.2. I have reset my Camera Raw defaults with no