What are the SAP Business one requirements for intercompany intergration

Hi. what are the SAP Business one requirements for intercompany intergration

Hi Wendy,
Intercompany 1.1 is supported on SAP Business One 8.82 and Intercompany 2.0 is supported on SAP Business One 9.0.
So depending on Solution version your are looking for, refer to Prerequisites section in the respective version's Administrator Guide.
For further information on Intercompany Integration Solution for SAP Business one, you may refer the following:
https://websmp210.sap-ag.de/partneredge/b1/intercompany
Regards,
Agneesh Jain
SAP Intercompany Team

Similar Messages

What are the minimum hardware Server requirement for SAP BI BO

I would be thankful if someone can please tell me What are the minimum hardware Server requirement for SAP BI BO. if a separate Desktop is used for the server or local server purpose.
In the Desktop
I have 8 GB RAM
2.60 Ghz Processor ( CPU)
System type: 64 bit OS
regards
ranendra

Hi,
Refer the attached PAM for BO 4.0 and 4.1.Minimum hardware details are listed there.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&overridelayout=true&58879706677537
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
I haven't try with your similar specification but in the below link some one tried with similiar one.
What are the minimum system requirements to install SAP BO 4.0/4.1
Amit

What are the optimal hardware specification requirements for Adobe Photoshop CS6?

Greetings to the staff and users of this forum,
As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
If any user here could provide me with proper higher specs, I would really be grateful.
Thanks,
phdwengr

This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

What are the Master Table validations required for below fields

Hi,
I have created a selection screen with following fields.
Can anybody tell me what are the exact master table vaidation i can do for the same!
<b>Order Type[VBAK-AUART],
Order Number[VBAK-VBELN],
Customer PO #[VBKD-BSTKD],
Sold-to Party No[VBPA-PARVW - SP as key],
Ship-to Party No[VBPA-PARVW - SH as key],
Division[VBAK-SPART].</b>
Agaist which master tables i need to vaidate above fields!
Also please clarify what is meant by [SP as Key] & [SH as key]! Is it needs to be defaulted!
Thanks in advance.
Thanks,
Prasad.

Hi Prasad,
For your another Query
SH- Ship To Party,
SP - Sold To party.
You can set anyone of them as Default depending on ur Bsuiness requirement ie. You are Forwarding ur Invoice to ship to or sold to Party.
Regards,
Leo

What are the sap basis administrator tasks for SAP CRM 7.0

Hello Guys,
I am an SAP BASIS administrator. I have never worked on any CRM system.
Now a days people in market talk much about wheather you have worked on CRM.
I have no idea how CRM basis administration is different from the basis administartion of other products based on netweaver.
I would appreciate if someone throw some light on "SAP basis administration of CRM system".
Thanks in Advance.

Hi,
Some excellent documentations are available in:- https://websmp205.sap-ag.de/crm-inst (search for the operation guide pdfs, if required you can also check inst/upg docs). User your S user id/password to login.
From my experience, in practical field most of the issues you will face with qRFC/BDoc message flow handling and JAVA stack administration. Stress on these two areas and go through the guides, CRM admin won't be a major issue.
Once you go through the basic operation guides and start working on the system then you will come to know there exists many CRM specific trx(SMW02,SMWP..etc) codes and CRM related tables(CRMPAROLTP,CRMRFCPAR.. etc),bgd jobs/reports - which you have to take care at times.
Thanks

Does SAP business one require solution manager for license keys ?

Does SAP business one require solution manager for license keys or you can directly get the license key from service.sap.com?

Hi,
Welcome you post on the SAP business one forum.
In general, only SAP partner can get the license key. However, partner can assign the right to customer so that they can get it from portal directly.
Thanks,
Gordon

Hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.

We are exporting data to the SAP Business one. Error: "The field is too small to accept the data you attempt to add. try inserting or pasting less data"

Hi,
I have exported the data from two sources, MS-Excel and SAP Business One to Sap Business One (8.81). While exporting the data, I got the error "The field is too small to accept the data you attempt to add. try inserting or pasting less data" for the first time, Immediately when I run it again, it shows export successfully completed, but nothing is changed in the SAP Business One. Could you please provide the solution as early as possible?
Thanks & Regards,
Chaitanya.B

ok
i solve the problem.i rezise the colomn size
thanks

What is the Java runtime version required for SAP GUI 6.20 for Windows?

Hi All,
I need the following information:
1. What is the Java Runtime version required for SAP GUI version 6.2 for Windows (Platform Windows XP)?
2. And is there any problem if we use Java runtime version 1.6 on PC?
It would be great if anybody can provide the information on the above.

To run SAP GUI for WIndows -- Java isnt a pre-requisite nor is there any dependency for the same.
Thanks,
GLM

What are the Corresponding fields in CRM for sales order in ECC

HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
Mayank

Mayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com

What are the SAP inbox tables.

Hi Team
i want to know what are the SAP inbox tables.
if i have click on SAP inbox for perticular user, retrived 37000 entries and give short dump "Time Out" . i want to know from which table retrived the records and display into the SAP inbox(SBWP).
Thanks in advance.
Puneet.

Look at SAPoffice tables and Business Workplace tables : SOOD, SOOS, SOC3, SOFFCONT1, BCST_SR, BCST_CAM
Regards,
Raymond

Capture keystroke from the SAP Business One Desktop

Does anyone know how I can capture a keystroke from the SAP Business One “Desktop” with the UI API?
Basically, open the B1 Client, then click the mouse in the back ground beside the main menu so that the cursor is “nowhere” (not in the search field). Now set some code In the KeyDown event to catch any keystrokes. Nothing happens. The event is not called. I even tried using SetWindowsHookEx API function but never got it to work with an SDK project since there is no form hHandle. Woudlnd even work once I gave the hhandle of the B1 Client

Hi Marc,
what is your exact requirement ?
I don't think you can specificly catch a key down in the background - but only because it is not possible to "lose" main menu as active form ( only if you close it -> then search field is active ).
So basically you have to find a logic where you can catch *your* keydown on any form.
Be aware of the fact, that keydown won't let you catch all keys / key combinations.
I had an equal requirement some time ago and after a lot of experimenting ( windows global hook wouldn't work reliable ) I ended up using SBO key shortcuts ( F2-F12 ) and their menu events.
regards,
Maik

What's the minimum Clock Speed Requirement for GB3?

What's the minimum Clock Speed Requirement for GB3 (assuming one wishes to create and play mult. audio tracks within this current iLife app)? Is it 733mhz?
Here's what i was able to find on
iLife ’06 requirements:
To install iLife, you need:
• A Macintosh computer with a PowerPC G4, G5, or Intel Core processor; 733 MHZ or faster required for iDVD
• 256 MB of RAM; 512 MB recommended
• Mac OS X version 10.3.9 or Mac OS X version 10.4.3 or later; Mac OS X version 10.4.4 recommended
• iTunes 6.0.2 and QuickTime 7.0.4 (included)
• A DVD drive for installation
• 10 GB of disk space to install iLife '06 applications

Thanks Christoph, TIA, and AppleGuy!
Christoph, what model are you using? You said you have even less Mhz, but your model looks like the same as mine.
TIA, I looked at the other thread (thanks for the link) any idea what other models are affected by the sound output problem?
I probably will back up first just to be safe, and won't try running them both at the same time. I was hoping though to have full functionality of the Podcasting features plus all the old music ones without slowing the machine down.
Tansef

What are the 3-bit field choices for Hw_Arm_Sel in PCI-6601

Hi,
I am programming our own driver to operate the PCI-6601. For our application we need hardware arm option. I know it is possible to use 2 counters for that, but NI-TIO should support also hw_arm. Although it is not explained in the registry document at all, after some tedious check in the DDK examples I found that this bits are located in the Gi counting mode register. I know the position of the HW_enable as well as the position of the 3 bits for pin sellect options. What I do not know is What are the 3-bit field choices for Hw_Arm_Sel . I contacted NI support but got no support. How can NI sell boards and when a customer who is not using LAbview or Measurement Studio or DDK, but is implementing his own driver is then so arrogantly turned down from NI? Also, how can NI publish just part of the registers the board support, and when a customer contacs and asks for some registers get not at all support? I can not foretell the missing registers, and it is pretty unprofessional to document just partly the registers of 660x devices. And on request you got nothing.
I hope someone from the community know about this Hw_Arm_Sel 3 pin options. Otherwise, there is just an option of error and trial. Or simply throw the board in the garbage.
Dr. Kirco Arsov
Solved!
Go to Solution.

Hi Kirco,
I have some more information for you :-)
I haven't been able to speak to the developer who is the most familiar with TIO programming since he's out of the office, but I have come across his notes from when he was writing support for the DAQmx driver.
As I described earlier, the HW_Arm_Sel bits don't select a connector I/O pin, but an internal trigger signal. There are seven internal trigger lines, and the HW_Arm_Sel bits map directly to the internal trigger signal: 0b000 - 0b111 map to 0d0 - 0d7. In order to route an I/O pin to an internal trigger, you must also write to a few more registers.
From what I've read, there are two more register families that need to be programmed: TG_x_LevelEdgeReg and TG_x_CombinationReg, where x is the internal trigger number. In your case, you only need one pin from the I/O connector to be your arm start trigger, so TG_0_LevelEdgeReg and TB_0_CombinationReg will suffice for your application.
TB_0_LevelEdgeReg :: Offset 0x660
TG_0_LevelEdgeReg is only 8 bits wide, and maps as follows:
7..6: EdgeMode
5..0: LESel
LESel selects the I/O connector pin to use as the source for the internal trigger signal. 0d0 - 0d39 will select the I/O pin of the same number. NB: behavior for TG_x_LevelEdgeReg is more limited for triggers 1-7, and only a small subset of the I/O pins can be selected for those trigger signals. Trigger 0 can use any I/O pin. Setting these bits to 0d63 forces the trigger source low, and can be used as a way to 'unroute' it when you're finished with your program.
EdgeMode determines whether the TIO will detect an edge of the incoming signal, or just pass the signal level straight through. When detecting edges, it will latch the signal and generate a single TIMEBASE3 pulse instead. 0b00 sets level mode; 0b01 sets rising edge; 0b10 sets falling edge; 0b11 sets either edge.
TG_0_CombinationReg :: Offset 0x6A0
TG_0_CombinationReg is 32 bits wide, and has three fields of interest:
19..16: CombFunction
5..4: CombTypeB
1..0: CombTypeA
CombTypeA controls which trigger subsystem to use as the source for the trigger signal. Since you're coming from an I/O pin and using the edge/level subsystem, you must set these bits to 0b01.
CombTypeB is similar to CombTypeA, and although you won't be using trigger B, set it to 0b01 to be safe.
CombFunction performs a simple logic function on A and B. Since you're only using a single I/O connector, you only need the A output, so set these bits to 0b1100.
All of the other bits should be set to 0b0.
Unfortunately, I'm unable to test these statements since my test machine is currently being used for another research project. Please let me know what happens if you decide to test.
Joe Friedchicken
NI VirtualBench Application Software
Get with your fellow hardware users :: [ NI's VirtualBench User Group ]
Get with your fellow OS users :: [ NI's Linux User Group ] [ NI's OS X User Group ]
Get with your fellow developers :: [ NI's DAQmx Base User Group ] [ NI's DDK User Group ]
Senior Software Engineer :: Multifunction Instruments Applications Group
Software Engineer :: Measurements RLP Group (until Mar 2014)
Applications Engineer :: High Speed Product Group (until Sep 2008)

What are the best books to purchase for pl/sql programming?

What are the best books to purchase for pl/sql programming?
I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
Thanks

In my opinion one of the best to start
Oracle PL/SQL Programming, Third Edition
Steven Feuerstein

What are the SAP Business one requirements for intercompany intergration

Similar Messages

Maybe you are looking for