What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields  f1, f2, from the document type. in billing sub tab.  so  The moment when am creating billing system automatically displaying F2 invoice doucment creation.  What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

Similar Messages

  • While doing 3rd party process,  So, how system will pick the vendor?

    Hi  SAP SD Experts,
    while doing 3rd party process, at the time of creation of sales order system automatically creates Purchase Requestiion with   reference to this Purchase order will be created while creating Purchase order system automatically picks the Vendor?
    So, how system will pick the vendor?
    where we do configuration for this?
    please help me out.
    Thanks & Regards,
    Nivas

    HI
    Based on the source List , Check with MM Consultant for better understanding the Source list concept
    and also check the below links
    [About the Source List Determination|http://www.sap-img.com/materials/about-the-source-list-determination.htm]
    [Inforecord and source list  |Inforecord and source list;
    Regards,
    Prasanna

  • What are all scenarios we will open the database in open resetlog mode

    what are all scenarios we will open the database in open resetlog mode..please advise

    Another situation I could think of is that when the active/current online redo logs are lost.
    Regards,
    Jaffar

  • How does system automatically picks up document type when you enter INV?

    1.How does system automatically picks up document type when you enter Invoice?
    2.What is Algorithms? Where is it used?
    3.What is the use of Customer Ledger Inquiry?

    The document type is hard coded by the system. Look at UDC table 00/DT for the document types in your system. Notice that some of those are marked as hard coded/reserved by JDE. You may wish to dowload the Accounts Receivable manual and read that to learn more about the document types.
    Not sure what you mean by algorithm, unless you are looking for how the system determines what document type to assign on invoice entry.
    These comments apply to accounts receivable and to JDE World, since you posted in the JDE World forum and are talking about the customer ledger inquiry. If you are in Enterprise One and asking about Accounts Payable, then this reply can be ignored (though Enterprise One works pretty similar to World in this respect).
    What is the use of the Customer Ledger Inquiry. To view accounts receivable detail history for a given customer, viewing on line. Whomever works in the accounts receivable department will likely use the Customer Ledger Inquiry quite a bit.
    Hope this helps a bit.
    John Dickey

  • How to change the document type while creating a PO by ME59N

    Hi,
    I  have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
    How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N? 
    Can any one suggest me.

    Hi,
    There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
    SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
    This will serve your purpose.
    Thanks,
    Srinu

  • Application log in the source system.

    Hi,
    I am trying to do the initialisation with data selection from R3 Source system into BW. Data was loaded but still the status showing Yellow and its giving the following messages.
    Information was stored in the source system.
    Diagnosis
    The system has written an <b>application log</b> in the source system.
    System response
    No errors occurred.
    Procedure
    Check the log.
    Procedure for System Administration
    Can any body help me how to look the Application Log & the solution for the above problem.
    Note : My PSA have all green records and it loaded 1176080 From 1176080 Records.
    Points will be awarded.
    Thanks,
    Abhi.

    Hi Abhi,
    If BW tells you that no errors occurred it makes no sense to look into the application log. What helps however is to check if processes are still active for your load, e.g. ODS activation. You can check using tcode SM50 (in R/3 for e.g. user ALEREMOTE, in BW e.g. user BWREMOTE...can differ in your system).
    Also check the Details tab in the monitor to see if all is green there (expand all nodes). Something might still be yellow so that's the step which is 'hanging'.
    Hope it helps...
    Grtx
    Marco

  • Source system info in the transformation

    Hi,
    How to get the source system information in the transformation or start routines? Is there FM or field which tells what source system the datasource is assigned to in the transformations ?
    Regards,
    Kalyan

    Hi,
    U will get the value of the source system from which the data is loading in p_r_request->get_logsys( ) inside the transformation.
    Hope it helps.
    Regards,
    Rathy

  • We would like to test old deltas from the source system( copied to new)

    Hi Gurus,
    The scenario is
    They will make a DB copy of the Prod system onto a QA system, the Copied system will have
    its system ID changed(SID) to a new one.
    There will be deltas available in the RSA7, as this is a copy of the  3 weeks old prod
    system. Now the delta's will be available on the Copied system pointing to the BW Prod system.
    We would like to test these delta's to BW Dev. why we would like to do the delta's to the
    BW dev system is to check whether we can do system copies without clearing the delta's on
    the source system.
    After the system copy we will do all the activities necessary to reflect the system changes
    a. Like BDLS, We20, we21,ALE checks, RFCDES, RSLOGSYSDEST, RSBASIDOC, etc on the source system to
    reflect the changes of the BW Prod system to BW Dev system.
    b. Likewise, we will perform all the above activities on the BW dev system by changing the
    existing source system to the new source system( performing BDLS,we0, we21, etc)to reflect
    the new Source system with the new (SID).
    c. We will check the source system connection
    d. Replicate the datasources on the new source system
    e. Activate the Transfer rules for the new source system.
    Now for us to do delta's from the new source system to the Bw dev system we need to change
    underlying tables in source system to point the delta's, arfc TID's etc to the BW dev system.
    We can change the entries in the TRFCQOUT, ARFCCSTATE, ARFCDATA tables to point the LUW's and
    destination to the BW dev system.
    What I presume is if we run the BDLS on the Copied system to change the BW prod system to BW
    and also  the underlying Tables for the LUW's and etc will still be pointing to BW Dev. I would
    like to know if this is the case .
    Lastly, appreciate if anyone can say if this is possible to do without having to clear the
    BW delta queue on the source system.

    Hi Ramesh,
    Appreciate a lot for your response, but i would like to know if we can reflect the entries in table RSSDLINIT(Last Valid Initializations to an OLTP Source) and RSSDLINITSEL(Last Valid Initializations to an OLTP Source)  in the BW system on the copied source system
    tables ROOSPRMSC(Control Parameter Per DataSource Channel), ROOSPRMSF(Control Parameter Per DataSource Channel) by executing the ABAP program RSSM_OLTP_INIT_DELTA_UPDATE after we do the BDLS conversion on the new copied source system.
    After the BDLS conversion I reckon the entries in the RSA7 queue, ARFCCSTATE, TRFCQOUT tables willl reflect the BW Development system instead of the BW Production system isnt it.
    response much appreciated.
    Kalyan

  • RFC destination BW could not be created in the source system R3073

    I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
    RFC destination BW could not be created in the source system message number R3073
    Why is this happening? The connection tests just fine.
    I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
    Any ideas?
    thanks

    Hi,
    I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
    Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
    Create your BWDEV RFCDEST manually in your BWQA .
    Perform test and authorization test within SM59 from both sys.
    When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
    hope this helps...
    Olivier.

  • CLIENT of the source system in the Transfer Rules

    Hi,
    Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
    I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
    I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
    If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
    If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
    Thanks in advance for your help.
    Regards,
    Melwyn

    hi,
    i think if your bw dev and prod client is different you can try in transfer rules
    if sy-mandt = xxx. ( bw dev client number)
       result = 'yyy'. (source system dev)
    else.
       result = 'zzz'. (source system prod)
    endif.
    or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
    or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
    hope this helps.

  • No Idocs arrived from the source system.

    Dear All,
    Please read this issue carefully.
    Error Message is that
    "No Idocs arrived from the source system."
    In the Details Tab:
    Trasnfer( IDOCS &TRFC):Missing Messages or warinings.
    Request IDOC:Application Documnet posted from BW side and it is green..There is a request BW IDOC number  sent to R3.
    Where as an InfoIdocs 1:Sent not arrived :Data passes to the Port is ok.
    Here i can see there is one idoc frm  OLTP R3 side ansd no incomming idoc for BW side
    I went to r3 side bd87 and found that idoc is posted well with status 53.
    This is happing in Bw for each iinfopcakage is running?

    Hi,
    go through this link...
    [https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=noidocsarrivedfromsource+system&adv=false&sortby=cm_rnd_rankvalue]
    System.-> Check RFC connection and clear/process stuck IDOCs.
    Idocs Missing or No Idocs arrived from source
    For this check the TRFC que(SM58).If any Idocs r strucked up there execute them manually.checkin sm58 transactions, you can check the status of your Idocs using BD87 in R/3. Idocs may not be processed because of load on system. You can process them manually from context menu.
    And go to BD87 to process the idoc's ..
    check which idoc has to process...select the idoc and click process ..Then It will push the data into the data targtes,
    Hope it will help you;
    regards,
    NR

  • ALE inbox of BI is identical to the ALE outbox of the source system

    Hi experts
    We have BW 7 on ERP (ECC) 6. We have BW and ERP TOGETHER on the same developing system. BW is designed on developing client 100 (it is future productive client on the future productive system). It is of course default "myBI" source system. Upload is correct.
    But because data is only inside clinet 200 (in the same system) I must create SAP source system client 200. It is correct, RFC destination is corect, source system clnt200 is correct and active.  But data I cannot upload from this source system clnt200 - IDOCs are not correct, BW monitor is yellow and message:
    ALE inbox of BI is identical to the ALE outbox of the source system
    Is mistake in situation "the same system - various clients and sourcesystems"? Do you have any experiences with BW on the same system with ERP 6 and client enviroment?
    Thanks
    Ales

    Hi Ales,
    The problem can often be caused due to missing authorizations with the background user used to receive the data in BW or
    the background user in the source system that sends the data to BW. Please check the authorizations as per the note
    150315 , sometimes SAP_ALL profile does not have the required authorizations so please check that the background users
    have the profiles mentioned in the note 150315:
    As per the note:
    Reason and Prerequisites                                             
    a) In the BW there exist two user:                                   
       i)  a human administrator, using S_RS_ALL                         
       ii) a user called BWREMOTE (or similar), used to receive the data 
           from the OLTP, using S_BI-WHM_RFC                             
    b) In the OLTP there exist also two user:                            
       i)  a human administrator, needing authorizations to create users 
           and RFC-destinations.                                         
       ii) a user called ALEREMOTE (or similar), used to ...             
           1) ... connect the OLTP to the BW                             
           2) ... extract the data                                       
           3) ... send the data to the BW                                
           4) ... show monitoring dialogs                                
           for tasks 1 to 4, the profile S_BI-WX_RFC is used (however does
           not suffice on some points since some authorizations are      
           missing in the delivered profile)                             
           5) ... make customizing of OLTP extractors                    
           for this, additionally the authorizations to execute          
           IMG-functionality, to execute Transaction SBIW and            
           to maintain the applications, which shall be customized, must 
           be given during the customizing functionality is used.        
    I hope that this helps.
    Regards,
    Des.

  • Change in the source system

    Dear All,
    We have currently BW 3.5 and CRM R/3 server up and running in Production.
    Now CRM server is being upgrade to CRM 7.0 . Now i being the BW consultant needs to find out what is that needs to be done at BW side.
    My idea :-
    1) We first need to create a new Source system and repllicate all the data sources in bw system.
    2) Assign this datasource to the old infosource.
    3) create an infopkg and try loading the data once again to the old cube.
    We can ahieve this in Dev system and then transport the Transfer rules again to BW Production system.
    Can we directly get this done in Production system????
    Kindly add your idea to this list and suggest if we can do this directly in the Productions system without the need to transport the Transfer rule from Deve system.
    Thanks & Regards,
    Anup

    first, temporarily disconnect the source system connection when the upgrade is started...
    after that as you said, please transport the transfer rules from DEV box to production box. it is not advisble to do directly in production box.
    Since the end user is having access to the production box, it is not advisble to open the production box as modifiable and allow to changes.
    Hence we cannot take long down time isnt..? After upgrade is done, please restore the source system connection.
    Better you dont delete the source system of your CRM system in BI.
    Hope this would help you.

  • Processing error occured in the source system

    Hi Experts,
    I am extracting payroll data from ECC 5.0 to BW side, after the extraction I'm getting warning message proceesing error in the source system.
    In the source system apllication log the following warning message displyed.
    <u>No assignment of payroll data to BW month for country grouping 99</u>.
    I checked at BW side the data was available in the PSA and Data Target, but the status was in YELLOW for long.
    If any one come accross this , please provide good inputs....
    Thanks & Regards
    Kumar

    I have the same problem.
    The following text is ment to help me.
    Havent solved it yet, but explects to find the activity 'Assigning the Payroll Data to BW Month' in spro.
    best regards
    Ingrid
    Message no. HR_BW_PY99026 Assigning the Payroll Data to BW Month.
    Diagnosis
    No assignment is specified for country grouping 20 in the Customizing activity "Assigning the Payroll Data to BW Month".
    System Response
    The SAP standard "End Date of For-Period" is used for this country grouping.
    Procedure
    Enter an assignment for the country grouping in Customizing the DataSource 0HR_PY_1.
    Choose: R/3 Customizing Implementation Guide -> Integration with Other SAP Components -> Business Information Warehouse -> Settings for Application-Specific DataSources -> Human Resources -> Assigning Payroll Data to a BW Month.

  • During creation of NON stock material PO from where system will pick price

    Hello All,
    While creating PO for non stock material from where system will pick the price?
    If info record is there from where it will pick, if info record is not there then from where it will pick like that...
    If existing PO is there or not
    if existing contract is there or not
    For non stock material should we maintain the material master or ?
    Please advise me
    Thanks in advance

    >
    sapmm99 wrote:
    > For non valuated material, material  master is required or?
    >
    > As per my knowledge material master is mandatory only for stock materials. not for not valuated and non stock materials usually we never maintain master data for non stock and non valuated materials
    >
    > if i am wrong please advise me
    Its upto you if you want maintain material master record or not for non valuated material. With material master you have a material code to input in the field of PO, without material master you put in short text.

Maybe you are looking for

  • Five minutes later"this song can no longer be made into a ringtone"

    I downloaded a song that had the bell next to it. Five minutes later, it's downloaded, and I click the bell icon to make my ringtone. A box popped up that said "this song cannot be made into a ringtone- this song can no longer be made into a ringtone

  • I plug my ipod into the computer but it doesn't show up on itunes

    I plug my Ipod into the computer, but it doesn't show up in Itunes

  • Convert vhdx to vhd

    Hi, Running Server 2012 R2  I have a requirement to convert a vhdx to vhd. I used the builtin feature in the hyperv manager to convert the vhdx (Fixed) disk to a vhd (fixed). When i create a new server an attach this vhd disk, i get an error when the

  • Photos in contacts display differently when incoming call

    G'day people Most of my contacts in the Address Book have photos and, of course, they imported together with other contact details when I plugged my iPhone into my iMac. However, what's strange is that some photos display full screen when that contac

  • Photoshop Elements 8 in Apple Lion

    Are others encountering problems with Elements 8 after installing Lion? Following installation of Lion I encountered problems with scanning and downloading photos via Elements 8.